Question about Foxconn (945G7MA-8KS2) Motherboard

1 Answer

No on board graphics after power up.

I have a new motherboard Foxconn 945G7MA and a new Celeron 1.80 GHz FSB 800 MHz processor. (and 2 times 1Gb DDR2) When the system powers up it seems to boot but there is no graphics.
I've taken out the external graphic board and am using the onboard graphics.
The display is working fine on other systems
The power stays on and the CD seems to startup. The HDD isn't bootable yet.
No beeps, doesn't seem to react to key strokes.

Treis to clear the CMOS, locked the boot flash process but so far no result.

Does anyone know how to get the graphics working? Or what the cause might be.

Posted by on

  • wombat3766 Mar 02, 2009

    In answer to DJ Gray... it's nothing at all. The display receives no signal.



    Yes, I've tried all the power connections. Measurement shows there is nothing wrong.

    I get the impression it's nog booting at all only power up.



    Could it be a wrong type processor?

    In the compatibility lists only a Celeron D is mentioned I have a Celeron.... Can't find much about the differences apart from speed and performance.

  • Damon Gray
    Damon Gray May 11, 2010

    Are you even getting white text (POST) when initially powering up, or is it just nothing at all?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 239 Answers

There are only a few things i can think of that might help. recheck to make sure all of the power supply cables are plugged in, although im sure that you've allready done that. you don't wan't to clear cmos due to the fact that you only do that if you are going to reflash it. could mke it unbootable. try going in to cmos and enabling quick boot this bypasses POST test and might get you in. also try reinstallling the Operating system as this load drivers for your display. the only other thing is you might have recieved a faulty motherboard, this happens mor frequently than you might think.

hope this helped.
please rate good.
best of luck.

Posted on Mar 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

45CMX/45GMX/45CMX-K I do not know what video cards and processors are compatible with this motherboard as I want to upgrade my pc


Hello download the manual here:

http://www.foxconnchannel.com/ProductDetail.aspx?T=motherboard&U=en-us0000341

Intel Core 2 Duo, Pentium Dual-Core, Pentium D, Pentium 4, Celeron D, Celeron processors, Socket T (LGA775)
- 1333(oc*)/1066/800/533 MHz (FSB)
- Dual Channel DDR2 667/533/400 x 2 DIMMs, Max. 4GB
- 1 x PCIe x16, 1 x PCIe x1, 2 x PCI
- ATA x 1, SATA II x 4
- 5.1 channel Audio
- 10/100M LAN
- 8 USB 2.0 ports

Good luck

Jun 17, 2012 | Foxconn 45CMX socket LGA775 motherboard...

1 Answer

What type of dual core processor can I use for my dc7600?


The motherboard for the dc7600 has an Intel LGA775 processor socket. However, not all LGA775 processors are compatible with the motherboard. For the small form factor, the following CPUs are supported: Intel Celeron D Processors:
Intel Celeron D 331 Processor (2.66-GHz, 256K L2 cache, 533-MHz FSB) , Intel Celeron D 336 Processor (2.80-GHz, 256K L2 cache, 533-MHz FSB) , Intel Celeron D 346 Processor (3.06-GHz, 256K L2 cache, 533-MHz FSB)
Intel Pentium 4 Processors with HT Technology:
Intel Pentium 4 521 Processor (2.8-GHz, 1-MB L2 cache, 800-MHz FSB) , Intel Pentium 4 524 Processor (3.06-GHz, 1-MB L2 cache, 533-MHz FSB) , Intel Pentium 4 541 Processor (3.2-GHz, 1-MB L2 cache, 800-MHz FSB), Intel Pentium 4 620 Processor (2.8-GHz, 2-MB L2 cache, 800-MHz FSB), Intel Pentium 4 630 Processor (3.0-GHz, 2-MB L2 cache, 800-MHz FSB), Intel Pentium 4 631 Processor (3.0-GHz, 2-MB L2 cache, 800-MHz FSB), Intel Pentium 4 640 Processor (3.2-GHz, 2-MB L2 cache, 800-MHz FSB), Intel Pentium 4 641 Processor (3.2-GHz, 2-MB L2 cache, 800-MHz FSB), Intel Pentium 4 650 Processor (3.4-GHz, 2-MB L2 cache, 800-MHz FSB), Intel Pentium 4 651 Processor (3.4-GHz, 2-MB L2 cache, 800-MHz FSB), Intel Pentium 4 661 Processor (3.6-GHz, 2-MB L2 cache, 800-MHz FSB) or
Intel Pentium D Dual Core Processors:
Intel Pentium D 805 Dual Core Processor (2.66-GHz, 2x1MB L2 cache, 533-MHz FSB), Intel Pentium D 820 Dual Core Processor (2.8-GHz, 2x1MB L2 cache, 800-MHz FSB), Intel Pentium D 915 Dual Core Processor (2.8-GHz, 2x2MB L2 cache, 800-MHz FSB), Intel Pentium D 925 Dual Core Processor (3.0-GHz, 2x2MB L2 cache, 800-MHz FSB), Intel Pentium D 930 Dual Core Processor (3.0-GHz, 2x2MB L2 cache, 800-MHz FSB), Intel Pentium D 940 Dual Core Processor (3.2-GHz, 2x2MB L2 cache, 800-MHz FSB), Intel Pentium D 945 Dual Core Processor (3.4-GHz, 2x2MB L2 cache, 800-MHz FSB), Intel Pentium D 950 Dual Core Processor (3.4-GHz, 2x2MB L2 cache, 800 MHz FSB)

Unfortunately, these are old processors and I don't see any available new. Newegg.com lists a couple available as refurbished. You may be better off getting a new computer with either a Intel I3 or current AMD processor.

I wish that I had better news for you.

Cindy Wells
(do not attempt to use a CPU that your motherboard doesn't support. It probably won't boot.)

Mar 30, 2012 | HP Compaq dc7600 Small Form Factor PC...

1 Answer

Can I upgrade my CPU to an Intel Core 2 duo 1.7


You are basically limited to what was optional on the model. So you can only upgrade to one of the following cpus:

Intel Pentium M 745 (1.8-GHz) with 400-MHz front
side bus (FSB)
Intel Pentium M 735 (1.7-GHz) with 400-MHz FSB
Intel Pentium M 725 (1.6-GHz) with 400-MHz FSB
Intel Pentium M 710 TJ85 (1.4-GHz) with 400-MHz FSB;
operates at a lower temperature than other processors
Intel Celeron M 340 (1.5-GHz) with 400-MHz FSB
Intel Celeron M 330 (1.4-GHz) with 400-MHz FSB

And you are limted to 2gb of ram max on this model.

Apr 12, 2010 | HP Pavilion dv1000 Notebook

3 Answers

Is it possible to upgrade to a faster processor on a hpn pavallion dv1000


here is a list of processors supported on that machine

Intel Pentium M 745 (1.8-GHz) with 400-MHz front
side bus (FSB)

Intel Pentium M 735 (1.7-GHz) with 400-MHz FSB

Intel Pentium M 725 (1.6-GHz) with 400-MHz FSB

Intel Pentium M 710 TJ85 (1.4-GHz) with 400-MHz FSB;
operates at a lower temperature than other processors

Intel Celeron M 340 (1.5-GHz) with 400-MHz FSB

Intel Celeron M 330 (1.4-GHz) with 400-MHz FSB

Mar 15, 2010 | HP Pavilion dv1000 Notebook

1 Answer

WHAT KIND OF PROCESSOR COMPATIBLE TO FOXCONN P4M800MO1


you can enter in your Mb any type of intel processors ranging max speed bus 800 mhz , for example you can enter intel pentium 4 hyperthreading 3.00 ghz , 800 mhz front side bus 1 mb cache, number 530, 530 j or better than him.

Apr 08, 2009 | VIA ECS PM800-M2 PM800 P4FSB 800 Supports...

1 Answer

Can I put to much RAM in the motherboard for the Processor?


That additional RAM will be good for your computer so it will be much faster and don't worry everything should work fine there after adding new RAM to your computer....

Jan 13, 2009 | Intel (C733) Celeron A, 700 MHz Processor

1 Answer

Best/Fastest CPU for DFI PE21-EL mobo


Your motherboard supports 2 different fsb's.
look these up @ cpu-world
you can use:
Intel Pentium 4 processor (478-pin)
- 533MHz system data bus - supports up to 2.8 GHz
- 400MHz system data bus - supports up to 2.4 GHz

Intel Celeron processor
- 400MHz system data bus - supports up to 2.0 GHz CPU speed
and here are the suppoted cpus:
Intel Celeron RK80531RC029128 BX80531P170G128 1.7 GHz 17 x 400 MHz, Willamette Any A RK80531RC033128 BX80531P180G128 1.8 GHz 18 x 400 MHz, Willamette Any A RK80531RC037128 BX80531P190G128 1.9 GHz 19 x 400 MHz, Willamette Any A RK80532RC041128 BX80532RC2000B 2.0 GHz 20 x 400 MHz, Northwood A 1.525V not supported RK80532RC045128 BX80532RC2100B 2.1 GHz 21 x 400 MHz, Northwood A 1.525V not supported Intel Pentium 4 RK80532PC021512 1.5 GHz 15 x 400 MHz, Northwood Any A RK80532PC025512 BX80532PC1600D 1.6 GHz 16 x 400 MHz, Northwood Any A RK80532PC029512 1.7 GHz 17 x 400 MHz, Northwood Any A RK80532PC033512 BX80532PC1800D 1.8 GHz 18 x 400 MHz, Northwood Any A RK80532PC037512 1.9 GHz 19 x 400 MHz, Northwood Any A RK80532PC041512 BX80532PC2000D 2.0 GHz 20 x 400 MHz, Northwood A 1.525V not supported 2.1 GHz 21 x 400 MHz, Northwood A 1.525V not supported RK80532PC049512 BX80532PC2200D 2.2 GHz 22 x 400 MHz, Northwood A 1.525V not supported RK80532PE051512 BX80532PE2266D 2.26 GHz 19 x 533 MHz, Northwood A 1.525V not supported RK80532PE056512 BX80532PE2400D 2.4 GHz 18 x 533 MHz, Northwood A 1.525V not supported RK80532PC056512 BX80532PC2400D 2.4 GHz 24 x 400 MHz, Northwood A 1.525V not supported RK80532PC060512 BX80532PC2500D 2.5 GHz 25 x 400 MHz, Northwood A 1.525V not supported RK80532PE061512 BX80532PE2533D 2.53 GHz 19 x 533 MHz, Northwood A 1.525V not supported RK80532PC064512 BX80532PC2600D 2.6 GHz 26 x 400 MHz, Northwood A 1.525V not supported RK80532PE067512 BX80532PE2667D 2.66 GHz 20 x 533 MHz, Northwood A 1.525V not supported RK80532PE072512 BX80532PE2800D 2.8 GHz 21 x 533 MHz, Northwood A 1.525V not supported

Dec 26, 2008 | DFI PE21-EL Motherboard

1 Answer

Memory upgrade


Hi Dave,
Foxconn 945G7MA-8KS2
Memory (Page 10 in user manual).
This motherboard includes four 240-pin slots with 1.8 V for DDR2. These slots support 256 Mb, 512 Mb and 1 Gb DDR2 technologies for x8 and x16 devices, and support maximum memory bandwidth of 8.5GB/s using DDR2 533 memory,
10.7GB/s using DDR2 667 in Dual-Channel interleaved mode, You must install at least one memory bank to ensure normal operation.
Need you're manual? Click on the link below.
http://www.foxconnchannel.com/support/downloads.aspx?ProductModel=945G7MA-8KS2&TypeID=en-us0000001

Foxconn 945G7MA-8KS2 motherboard main page link.
http://www.foxconnchannel.com/Product/Motherboards/detail_overview.aspx?ID=en-us0000024

To upgrade with 1GB. This includes S/H. (Free S/H).
http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=80098-35

TigerDirect less S/H. (S/H not included).
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1026780&CatId=1647

I did find others for less on the surface. Untill you go to check out & get slammed for shipping (ground), falls between $4.99 to $9.99. I use Corsair myself. Never had a problem.

Have more questions, feel free to ask.

Mike

Apr 18, 2008 | Foxconn (945G7MA-8KS2) Motherboard

2 Answers

Motherboard


Hi michlionfan, the following link shows what CPU's your Foxconn 661MX board can handel.
http://www.foxconnchannel.com/Upload/Compatibility/200607120855293005661MXhtm.htm

Link to foxconn 661MX motherboard site.
http://www.foxconnchannel.com/product/Motherboards/detail_spec.aspx?ID=en-us0000114
From this site, look to the left & find the words, Main Page typed in green. Under these two words is, compatibility. Click on it.

Best wishes!
If you need any more help feel free to post here or click the ask me button.

Mike

Apr 17, 2008 | Foxconn 661MX Motherboard

1 Answer

New processor needed


Hi, For Dimension 3000 system here are your options. Pentium IV 3.2 GHz 533 / 800 MHz FSB Pentium IV 3.0 GHZ 533 / 800 MHz FSB Pentium IV 2.8 GHz 533 / 800 MHz FSB but what i'm worried about is the socket where the process goes into. for thermal issues it is expected for the socket to CHIP CREEP. Chip creep refers to the problem of chips that, over time, would work their way out of the socket. Chip creep occurred due to thermal expansion; the contracting and expanding during system heat up and cool down. you might end up replacing the mobo as well.

Oct 04, 2007 | Dell Dimension 3000 PC Desktop

Not finding what you are looking for?
Foxconn (945G7MA-8KS2) Motherboard Logo

Related Topics:

333 people viewed this question

Ask a Question

Usually answered in minutes!

Top Foxconn Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

David
David

Level 3 Expert

778 Answers

Gareth Cockram
Gareth Cockram

Level 3 Expert

660 Answers

Are you a Foxconn Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...