Question about D-Link ADSL2/2+ Modem/Wireless Router 4-Port Switch, 802.11g, QoS (DSL-2640B)

1 Answer

I have aWireless G ADSL2+ Router but i can not open it external users. i How can i share the connection with laptop computers.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Get a wireless modem and connect it to laptop.

Posted on Mar 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Belkin N1 Wireless ADSL2 Model # F5D8631-4 Router router default address (192.168.2.1) is not opening, even i have reset the router


Connect a LAN cable from Belkin to your laptop/computer's LAN port, open a browser on your laptop/computer and enter the Belkin's configuration URL. http://192.168.2.1
The default PW = blank (just press Enter) You can now change the default admin password.
You can now configure the wireless settings to protect your wireless network and Internet from unauthorized access. Now configure the wireless card in your computer/laptop with the router's wireless settings. To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Dec 09, 2012 | Belkin Routers

1 Answer

I have new laptop dell computer and want to use it at home with my d-link wireless adsl router but am unable to connect to internet and it asks me for security key number


Connect a LAN cable from the D-Link to your laptop/computer'sLAN port, open the browser on your laptop/computer and enter the D-Link'sconfiguration URL..
http://192.168.0.1
The default login = admin
The default PW = blank (just press Enter) You can now change the default password.
You can now configure the wireless settings. Now configure the wireless card in your computer/laptop withthe router's wireless settings.
To secure your wireless network from unauthorized access,please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Jul 11, 2011 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

I am using dlink wireless router. How can i restrict unauthorised users accessing net through my connection?ADSL2+router


By using your wifi security.
Log on to the router and turn on WPA2 security, choose a password, and you should be ok

Sep 23, 2010 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

I brought new wireless router G ADSL2 4 PORT ROUTER but i dont know how to fix


Configure your router with below method then all messup will be fixed. Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on WAn settings and set wan settings as internet service provider settings. Then click on wireless settings then enable wifi also enter SSID name and enable broad cast turn on wifi . If you want to secure wifi then enable WEP in wireless security .Enter code it is your password to connect wifi. Then connect internet cable to WAN port then you can use internet with it. Let me know if you need further assistance. Thanks for using FixYa.

Aug 04, 2010 | D-Link ADSL2/2+ Modem/Wireless Router...

2 Answers

Please help me!! i dont know how to get mt network security key and i cant connect to the internet cause i have to have to have the network key!!


Look on the back of the router/modem and press the little RESET button-hold it down for about 15 seconds. This will reset the unit back to default settings.

To get back it back up and working again, click here for the manual, and other support services:

http://www.dlink.com/products/?pid=567

Hope this helps.

Mar 06, 2010 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

Port forwarding on dlink adsl2 router


Step 1. Before you open ports in your router, set the computer (or the device) which requires
ports to be opened for, with a static IP address. You can choose any IP address from the
range of addresses you are using on your local network, as soon as it is not used by any other
device. The default range is from 10.1.1.2 to 10.1.1.254. In our example we are using
10.1.1.99.
Windows XP: Control Panel > Network Connections > Local Area Connection > Properties >
Internet protocol TCP/IP > Properties
Windows Vista: Control Panel > Network and Internet > [Network and Sharing Centre] > View
Network Status and Tasks > View Status > Properties > Internet Protocol v4 > Properties
Select the “Use the following IP address” option:
IP address: 10.1.1.99
Subnet mask: 255.0.0.0
Default Gateway: 10.1.1.1 (your router’s address)
DNS: 10.1.1.1 and 61.88.88.88 (or whichever your provider is using)
Now open the necessary ports in your router and redirect the traffic to the 10.1.1.99 address.
Here are the steps:
How to open ports in your router Page 2 of 6
Step 2.
Open your web browser and enter the IP address of the router (http://10.1.1.1). Enter
user name and password (default username “admin” and password is “admin”).
Step 3. Click on Advanced at the top and then click on LAN Clients.
How to open ports in your router Page 3 of 6
Step 4
. You will need to add a LAN Client (the address of your computer or a device) into the
router before you can open any ports. Type in the IP address of the Computer/Device (the
one you assigned in Step 1). You can specify the name of this workstation under Host Name
(optional). Click Add and then Apply.
Step 5. Go to Advanced > Virtual Server (Port Forwarding). There is a list of pre-set ports in
the router which you can choose from.
How to open ports in your router Page 4 of 6
Step 5a.
If your specific application is not listed there, you can add the necessary ports
yourself. Select the “User” Category and click on Add button below.
Step 5b. Enter a name for this entry under Rule Name. Then select the necessary protocol. If
there is a range of ports to open, specify the starting port under Port Start and the ending port
under Port End. If you need to open just one port, specify this port number in all fields
including the Port Map. Click Apply.
How to open ports in your router Page 5 of 6
Step 6.
Go back to Advanced > Virtual Server. Under LAN IP select your LAN Client (which
you added in Step 4). Select the Category and the desired Rule or select “User” Category
and you should see the rule which you have created in Step 5b. Select it and then click on
Add > to move it into the Applied Rules section. Click Apply.
Step 7. To save the new settings into the router's memory go to Tools > System. Click on
Save and Reboot button. The router will save the settings and restart.

Jun 21, 2009 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

My second laptop is not connect with modem


You can network both of these machines together so they share hard drive info and also the internet connection from the modem too,

=========\=====================

What operating systems are loaded on each machine thanks

XP and Vista are very different so we need to know to provide the correct solution for you.

Does your modem have 4 ports on the back?
do you have a network switch?4 ports?
=================================

XP ------->>>>>>>>>>>>>>>>>>>>

Go to start
then my computer
network places
veiw network connection
(could be on or off,need to turn this on and
make sure modem is connected to the machines or network.)

click on set up new network wizard
do this on both machines at the same time
go all the way thru to the end and select to just finish the wizard at the end

shut down and restart -

Go back to network places and check the new settings your have just set up,
you should see the computers on the network now and should be able to share across the network too .
network shared files to network shared files
from computer 1 to computer 2.

Check your internet connections too....

Hope this helps ,,,,
Need more help let me know,

Cheers Misterdj

Jun 17, 2009 | Arris WR850G Router (DHWR850G)

1 Answer

Internet sharing


one question did you have any network hub to connect multiple lan?

Feb 18, 2009 | D-Link ADSL2/2+ Modem/Wireless Router...

1 Answer

Setting linksys WRT54GX Ver2 with D-Link DSL-2450T ADSL2+router


Your router needs to be configured. Call Linksys Technical Support. If they cannot help you try this http://technicalsupport.blog.friendster.com

Feb 15, 2009 | Linksys Wireless-G WRT54GX Router...

2 Answers

LinkSYS ADSL2 -AG241Modem + Router Ethernet


Hi,

First : check your cables if its plugged in securely on each each
port
Second: Try to change their ends
Third : Try to replace your Ethernet cable.

If your router is connected to a modem try to isolate the problem by connecting your router directly to your computer and check f light would turn on. IF YES then thers something wrong with your modem, check it out.

Hope those simple steps ive provided helped you in way, If not pls let me know and lets keep the ball rolling.

Cheers.

Jun 19, 2008 | Linksys ADSL Modem + Router With 4-Port...

Not finding what you are looking for?
D-Link ADSL2/2+ Modem/Wireless Router 4-Port Switch, 802.11g, QoS (DSL-2640B) Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Routers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Mike

Level 3 Expert

4331 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a D-Link Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...