Question about HP ProLiant ML150 G3 Server

1 Answer

Server error HI I am Raviraj i am using hp proliant ml150 g3 server with windows 2000 server with sp 4. whenever i restart server i getting the error message like 02A2 BMC System Event Log (SEL)Full press f1 to continue kindly help regarding this

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 101 Answers

Clear System Event Log thru CMOS setup or the management software provided with server . The SEL is full that is the reason the error message

Posted on Mar 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My HP ML150 G3 can not be used to ver4.11 or netware OS 6.5 Why?


Try to install with Smart Start CD you can download from link below:
Smart Start

Dec 15, 2013 | HP ProLiant ML150 G3 Server

1 Answer

HP ML150 G3 can not be used to ver4.11 or netware OS 6.5


In many cases the Net Framework from Microsoft needs upgrading. Go to Microsoft and get the 4th and final version unless you are using Windows 8.1 which has it builtin.

Dec 15, 2013 | HP ProLiant ML150 G3 Server

1 Answer

ML150 G3 server starting hp proliant screen after it is going to automatically restart, what can i do?


check ram
try hitting f8 on boot see if you can get into safe mode?
if u can then try running chkdsk /f in dos mode
if that doesnt work run a scan in safe mode
if cant get into safemode at all,get a bootable erd commander 2007 and boot with cd,choose your windows installation if you see it and use restore option,if you dont see windows installation at all try backing up ure data if necessary using usb adaptor for hard drive n copy data to other pc nad re install windows

May 05, 2011 | HP Compaq ProLiant ML150 G3 Server

1 Answer

Dell RAID controller in HP server? Hi i have dell (Adaptec) CERC SATA1.5/6ch RAID card, now i want to use this card in HP proliant ml150 g3 server, after fixing this card server did not recognize it keeps...


This particular device will require drivers for the Operating System to use. Also the hard disk drives will have to be installed an initialized outside the Operating System first before use. This is usually during startup after the system BIOS.

The exact steps can be found on the RAID card manufacturer's web site.

Feb 18, 2010 | HP ProLiant ML150 G3 Server

1 Answer

When i repair my windows at my server (HP ML150 )


reboot, and check to see if BIOS 'sees' the hard drive...if bios lists the drive, right click on 'My Computer' and select manage drives. the interface there is pretty straight forward... if bios does NOT see your drive, check your pin settings, be sure your connections are tight ...and check the BIOS settings match your drive

Jun 04, 2009 | HP ProLiant ML150 G3 Server

1 Answer

Can i have a hp proliant 150 generation 3 server bias setup guid line for intalation obunto sever pack.


ML150 G3 is on the certified HW list for Ubuntu Server edition. There should be no special steps required to install this.

May 04, 2009 | HP ProLiant ML150 G3 Server

2 Answers

Server error


The System Event Log may become full of erroneous IPMI Events reported by the System BIOS. When this occurs, the following message may appear during Power-On Self-Test (POST) and POST cannot continue without user input:
02a2: BMC System Error Log (SEL) Full
Press F1 to Continue, Press F2 to Setup
If the above message appears during POST, perform the following steps to run BIOS setup and delete the System Event Log:
  1. Boot the server and press the F10 key when prompted to run BIOS Setup.
  2. Select the "Advanced" menu.
  3. Scroll down to "IPMI" and press the ENTER key
  4. Scroll down to the System Event Log and press the ENTER key.
  5. At the "Clear System Event Log" selection, press the ENTER key to toggle between "Enable" and "Disable."
  6. Select "Enable."
  7. Press the F10 key to Save the changes and exit the BIOS Setup.

Mar 02, 2009 | HP Compaq ProLiant ML110 G4 Server

2 Answers

HP Compaq ProLiant ML150 G3... Problem:


Hi ,
1) This server is a G3 , latest is G5 . It is outdated unsupported equipment.
2) Your continuous beeps on boot up with no video seems to indicate VGA card problem . Just put in another cheap VGA card and retest.
Good luck on solving your problems , hope I have helped you.

Jul 24, 2008 | HP Compaq ProLiant ML150 G3 Server

Not finding what you are looking for?
HP ProLiant ML150 G3 Server Logo

761 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computer Servers Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a HP Computer Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...