Question about Samsung SCX-4100 All-In-One Laser Printer

2 Answers

OPEN HEAT ERROR

MY SAMSUNG SCX 4100 HAS THIS PROBLEM: OPEN HEAT ERROR.
WHAT'S THE SOLUTION ABOUT THIS PROBLEM?
THANK YOU IN ADVANCE
Paola

Posted by on

  • 1 more comment 
  • wardtan Mar 16, 2009

    Samsung SCX4100-open heat error



    THANKS!

  • Dmitriy Glagolev Mar 25, 2009

    I have old printer Samsung SCX-4100. When I turn it on, message appears: "error: overheated". I found some advices how to solve this problem: change termistor pw-2n 1105 e150. Is it right advices or not? Maybe there are other solutions?

  • Dmitriy Glagolev May 11, 2010

    I checked two thermistors in the Frame Fuse, but it ok. And thermolamp ok too. I think, trouble in mechanical part of printer. Something do not allow to warming properly. And, maybe, condensers are bad.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 113 Answers

Hi there,
"Open heat error" ---
open the back cover and you find a two wire connector just near ribbon connector it is thermistor connector the printer is sensing this connector as open or not connected explore and fix.
Good Luck!!!

neo

Posted on Mar 02, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi there,
"Open heat error" ---
open the back cover and you find a two wire connector just near ribbon connector it is thermistor connector the printer is sensing this connector as open or not connected explore and fix.
Good Luck!!!

Posted on Nov 18, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung scx 4100 nshowing open heat error


you have to replace thermister wire it is @ heater unit

Sep 22, 2010 | Samsung SCX-4100 All-In-One Laser Printer

2 Answers

My samsung scx 4100 series printer showing open heat error.....what can i do for this error


Hello,
this is a fuser problem. Maybe lamp is broken or heat sensor didnt work properly.
You can fix it whit repalcing fuser module or replacing broken parts (cheaper way).
Just visit authorized service - my advice!

May 25, 2010 | Samsung SCX-4100 All-In-One Laser Printer

3 Answers

Open heat error


I think you can get a service/repair manual from this link:


http://www.nodevice.com/user_manual/samsung/printers/scx-4100.html

Jun 01, 2009 | Samsung SCX-4100 All-In-One Laser Printer

1 Answer

Open Heat Error


The fuser unit is most probably faulty, you will need to have it replaced.

May 19, 2009 | Samsung SCX-4100 All-In-One Laser Printer

1 Answer

Suddenly I am fatching with my Samsung SCX-4100 printers with a message that " OPEN HEAT ERROR" Please help me I am with e-mail address : shelim_03@yahoo.co.in


this normally your machine requires a new fuser unit, if it is not under warranty it would be cheaper to buy a new machine.

you could take it to a service agent and they may be able have a look.

Jan 01, 2009 | Samsung SCX-4100 All-In-One Laser Printer

2 Answers

Open heat error on samsung scx 4100


What the error message is referring to is that the fuser assembly in the back of the unit is bad and wont heat up to the required temperature. A fuser is used to melt the powdered toner into the paper.
You are probably going to have to call a service tech to verify this and have it ordered and installed as usually this is not a user serviceable part.

Dec 05, 2008 | Samsung SCX-4100 All-In-One Laser Printer

2 Answers

Samsung clx-2160


Hi I asked about the CLX-2160 NOT the SCX-4100  I have had no replies yet
Regards
Anthony Showman

Nov 09, 2008 | Samsung SCX-4100 All-In-One Laser Printer

3 Answers

Scx 4100 scanner error


let me guess all of you have vista?
FCUK VISTA
just install windows xp
it will work on it

Jun 02, 2008 | Samsung SCX-4100 All-In-One Laser Printer

2 Answers

Failure to print


Hy i had the same error message the error comes from the fuser unit , the halogen lamp is not heating , on the top of the fuser unit is a Thermostat in series with the halogen lamp wich u have to replace. Its not that easy if you dont have experince but it will solve the heat error. I hope this helped

May 21, 2008 | Samsung SCX-4100 All-In-One Laser Printer

3 Answers

Samsung scx 4100 printer Problems


hi i installed succesfully samsung scx-4100 printer drivers in my loptop, ihave window xp home in laptop, when i am scaning my document it says the "unknown devise name".when i am printing the document it work very good with out giving any problem . can you please suggest how i can solve this proble. thanks faruk memon

Apr 15, 2007 | Samsung SCX-4100 All-In-One Laser Printer

Not finding what you are looking for?
Samsung SCX-4100 All-In-One Laser Printer Logo

2,339 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Printers & Copiers Experts

Whit
Whit

Level 1 Expert

185 Answers

HEMANT GROVER

Level 2 Expert

166 Answers

CheckitRight
CheckitRight

Level 3 Expert

1349 Answers

Are you a Samsung Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...