Question about Linksys Ultra RangePlus Wireless Routr Router

1 Answer

Error: 1670 Unable to load Module D:issetup.dll error code 1114

I want to install a router and the installation cd gives me this error. Can you please help. I don't know what to do. Thanks alot

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Linksys Master
  • 4,338 Answers

Router setup
If you are using the cd that comes with the router, that is the problem. You do not have to use the cd. Go to the control panel and un-install the program that the cd installed. then:
Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Posted on Mar 02, 2009

2 Suggested Answers

Joed911
  • 4338 Answers

SOURCE: Unable to load install CD

Router setup
You do not have to use the cd. Go to the control panel and un-install the program that the cd installed. then:

Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Posted on Dec 26, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to reinstall my router but i have lost the instalation cd. Do you know where i can down load it


You do not have to use the cd. Go to the control panel and un-install the program that the cd installed. then:
Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe

Dec 29, 2010 | Linksys Wireless-G WRT54GS Router...

1 Answer

I have Belkin Wireless G Router F5D7230-4,but i don't have cd ,so have i have to install that


. You do not have to use the cd. Go to the control panel and un-install the program that the cd installed. then:
Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router



If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!
Thanks, Joe

Dec 22, 2010 | Belkin (F5D7230-4) Router (587009)

2 Answers

Cannot load linksys advisor


Router setup
You do not have to use the cd. Go to the control panel and un-install the program that the cd installed. then:
Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.




If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response.

Thanks, Joe



Dec 07, 2010 | Linksys WRT110 Wireless Router

2 Answers

Cannot connect to network adapter


ask your internet service provider if there is a need for them to configure your modem for a username and password. please also check if the drivers of your network driver is installed to your pc.

Jul 06, 2009 | Belkin (F5D7230-4) Router (587009)

1 Answer

KEEP GETTING ERROR 321 WHEN SETTING UP LINKSYS WRT54GS ROUTER


Router setup
If you are using the cd that comes with the router, that is the problem. You do not have to use the cd. Go to the control panel and un-install the program that the cd installed. then:
Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Feb 17, 2009 | Linksys Wireless-G Broadband Router

1 Answer

Router not hooked up properly


Router setup
If you are using the cd that comes with the router, that is the problem. You do not have to use the cd. Go to the control panel and un-install the program that the cd installed.
then:
Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line.



If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


Jan 01, 2009 | Linksys Wireless-G WRT54G Router

1 Answer

Unable to load install CD


Router setup
You do not have to use the cd. Go to the control panel and un-install the program that the cd installed. then:

Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Dec 26, 2008 | Computers & Internet

1 Answer

I have a WRT160N and when I put in the install CD it gives me an error code: Unable to load Module D:\issetup.dll Error Code 1114


Router setup
If you are using the cd that comes with the router, that is the problem. You do not have to use the cd. Go to the control panel and un-install the program that the cd installed. then:

Shutdown your PC. Unplug the power from the router and the cable modem.
Wait 30 sec. then plug in the power to the cable modem, wait 30 sec. then plug the power to the router. Wait till you have "Internet" light then restart your PC. The PC should pick up an IP address and you should be able to get on-line. This is if you have a cable service provider. If you have DSL, the router needs to be configured with PPOe.


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe




Dec 26, 2008 | Linksys WRT160N Wireless Router

1 Answer

Lost installation cd


The installation CD is actually just a guide. It does not install any software on the computer. You can configure/reconfigure the router even without the installation CD.

If you need help reconfiguring the router, please let me know.

Please provide also the following info:
1. Who is your Internet Service Prodiver?
2. What is the model/brand of your modem?

Aug 10, 2008 | Linksys Wireless-G WRT54GS Router...

5 Answers

Lost Install CD for F5D7230-4 Wireless Router


for setting up your belkin router i would say you don;t need any CD . just follow the steps Mention on this blog How to Setup Belkin router Install Belkin Wireless router mac or windows all steps are there that will help you to setup belkin router

Nov 01, 2007 | Belkin (F5D7230-4) Router (587009)

Not finding what you are looking for?
Linksys Ultra RangePlus Wireless Routr Router Logo

1,177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

mark

Level 2 Expert

105 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...