Question about TruTech PLV16190 Television

1 Answer

TRUTECH PLV16190 wont stay on keeps turning off.

When I try to turn the TV on the red on / off LED indicator goes off like the TV is getting read to come on. Then in about 3 seconds the screen flashes and then the TV turns off and the red LED indicator comes back on letting you know the TV turned off.

Posted by on

  • AmigoScott Apr 19, 2009

    I'm having the same problem. It just started a couple days ago. When I try to turn the tv on, it flashes white for a second, but then it turns off, and this continues until I unplug it. As soon as I plug it back in, it continues cycling on and off. There's no sound or picture for the brief moment that it's on, just a white flash. Any suggestions?

  • javswr
    javswr May 11, 2010

    Hi!

    Is the tv flashing a white screen or a quick picture flash? Does the red led blink?


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 367 Answers

Open the back of the TV,and look at the can shaped items called capacitors on the circuit boards.If any of them have the tops,or bottoms bulged out,they need to be replaced.This should get it working again.I hope this helps.If you have any questions,please let me know.Thank You very much!
Tyler

Posted on Jun 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to program my ccd remote


Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

    Code Search
    If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
    1. Manually turn on the device (TV, VCR, etc.) to be controlled.
    2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
    3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
    4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
    5. Press and release MUTE to install the code. The indicator light goes off.
    Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.

Jun 18, 2012 | TruTech KLV3112 10 in. LCD TV/DVD Combo

1 Answer

I have a 32 in trutech monted to the wall. Lost the remote and don't know how to turn it on.


Turn on the tv by pushing the manual button,power on manual button like to the right or left sides of the tv manual power on button.Or try website like Remote.com to buy a replacement of an original remote.

Mar 21, 2011 | TruTech PLV16190 Television

1 Answer

My Trutech PLV16190 TV will not turn on. What can I do?


Did you get this fixed yet?Please let me know.Thank You very much!

Tyler

May 22, 2010 | TruTech PLV16190 Television

1 Answer

My trutech television does not turn on. The red button keeps flashing but no image.


Did you get this fixed?Please let me know.Thank You very much!

Tyler

May 16, 2010 | TruTech PLV16190 Television

1 Answer

Tv will not turn on


Ur power board it dead,must replaced.If ur light LED notting it on.

Dec 10, 2009 | TruTech PLV16190 Television

1 Answer

Unit will not turn on


Did you get this fixed?If you have any questions,please let me know.Thank You very much!


Tyler

Apr 19, 2009 | TruTech PLV16190 Television

1 Answer

Trutech 16190 no remote


Try the Universal remote control URC-R6 it works fine with my Truetech.
The bad thing about my Truetech PLV16190 19" Flatscreen, 30days after I purchase the remote the tv went out. Screen Black, but sound works fine.

Feb 05, 2009 | TruTech PLV16190 Television

1 Answer

Trutech plv16190 picture going off after 3o minutes


Open the back of the TV,and look at the can shaped items on the boards.If any of them have the tops,or bottoms bulged out,they need to be replaced.This should get it working again.I hope this helps.If you have any questions,please let me know.Thank You very much!


Tyler

Dec 27, 2007 | TruTech PLV16190 Television

Not finding what you are looking for?
TruTech PLV16190 Television Logo

Related Topics:

661 people viewed this question

Ask a Question

Usually answered in minutes!

Top TruTech Flat Panel Televisions Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

68209 Answers

Are you a TruTech Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...