Question about Whirlpool Washing Machines

1 Answer

Washer gets stuck before rinse cycle, have to pull the knob out and hold it by hand while it fills for rinse and until it starts to drain.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 117 Answers

Possible faulty timer

Posted on Mar 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I load washer it starts the wash cycle it goes through wash cycle fine drains water but does not collect water for rinse cycle it just idles. So I turn knob to spin and it spins until done.


If it doesn't fill for the rinse, I would say that the cold inlet valve has failed. Check that the cold tap is turned on and check when the machine fills for the wash cycle and see if it is taking hot or cold water. You will probably find that it is filling only with hot water. A local spares store should have the valve you need.

Sep 17, 2015 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Bought in 2006 and quit working all together in 2007 then pulled it out today and the thing started working until the end of the wash cycle and wont come on at all again... it drained well but at the


Hello Kimberley,
It appears that a part of your question is cut off so i may be off base here but what i am reading is that your washer will go through the wash cycle and drain the wash water then just quit?? is that what is happeningIf yes that is whats going on i think what is happening is that after the wash cycle it fills with only COLD WATER for the rinse cycle and its not filling with the rinse water and just sits their until the rinse cycle water is filled and if its not getting cold water into the washer its not going to do anything If it is filling with cold water my apologies my bad for misinterpreting what the question reads and i ask ya to re-ask it.
GENE

Nov 03, 2011 | Kenmore Elite Oasis 27052 Top Load Washer

1 Answer

Kenmore 70 Series Washer Won't advance in the


Bad timer. Try to find a used one if possible, this item is a little expensive.

Aug 23, 2010 | Kenmore Washing Machines

2 Answers

Washer runs until rinse cycle, then starts making


pull problem code from machine. give knob a turn to wake machine-wait 5 seconds-then hold down start and cancel buttons at the same time. Your problem code will come up.

Nov 17, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

Whirlpool LXR9245EQ2 tub won't fill at beginning of cycle


HI, you have a combination issue. the Water fill level pressure switch and, the cycle selector switch are both damaged and, they should be replaced. the total cost of these switches will run you about $90.00.

We recommend the hands of a skilled service tech when repairing this type of electrical issue.

Jun 18, 2009 | Whirlpool Washing Machines

1 Answer

Washer will not complete cycle


washer fills up but wont start washing i can turn the knob just passed the numbers and the little marks and it starts washing and when it gets to the rinse cycle it wont rinse but when it gets to spin cycle it spins good

Mar 16, 2009 | Whirlpool Ultimate Care II LSQ9549L Top...

2 Answers

Machine fills and agitates, but won't drain


Please empty your machine and run the machine empty. If the washer goes through the whole cycle without any clothes. Please let me know

Jan 19, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Washer only works by manually advancing the dial.


yes this sounds like a timer it sounds like it is getting stuck in the cycle. replace the timer and this will clear up the problem

Dec 29, 2008 | Maytag SAV3710AWW Washer

1 Answer

Washing machine won't drain


It sounds like you may have some bad contacts in the timer or you may have a bad lid switch which will not allow it to go into a spin during the rinse cycles or the final spin.

Oct 30, 2007 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...