Question about Dell Inspiron 9300 Notebook

1 Answer

Screen goes blank

I push the button to turn on the computer. The windows start screen appears, the screen turns blue (this is normal) and then the screen goes very dark. I cannot even see the login screen. Any help would be greatly appreciated I cannot use my computer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 513 Answers

Try to load to safemode by restarting the pc and hitting F8 before loading the windows, after you load to safemode right click on desktop screen and hit properties and check if you change the size of screen?or the setting there? also look for the device manager of your vedio card and check if it works properly.
If all this not working this means your vga converter has problem this is card inside your laptop mostly happen with dell laptops, if you donot want to change it now, try to see if you have external screen port and connect your laptop to external screen.
Let me know wat happen?

Best Regards

Posted on Mar 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HP pavilion ze4600 XP operating system safe mode etc. will not load CD restore does not work either? help


Firstly hdd's shouldn't click. Purchase a new hdd set your BIOS to boot from CD drive, install XP from your disc.

Dec 05, 2014 | HP Computers & Internet

1 Answer

Problem with windows starting up with blue screen


Update drivers that control your PC. If problem still persists then use a system utility tool like RegInOut, it will fix the following problems in your PC:
  • Application runtime errors
  • Windows crashes
  • Blue Screen of Death (BSOD)/ STOP Errors
  • Automatic system reboots
  • Failure to start your computer
  • Programs refuse to start
Hope it works for you.

Jan 03, 2012 | Coby 10" NBPC1023 Netbook PC

1 Answer

TURNS ON , GOES TO START NORMAL OR SAFE MODE, GOES THRU THE WINDOWS XP SCREEN AND THEN GOES BLANK


Follow the steps below,

Step 1: Shut down your PC completely.
Step 2: Turn on the Power button.
Step 3: As soon as you turn it on start hitting the F8 key on your keyboard until you get to a black screen called "Windows Advanced option". (If you don't get to that that screen but you end up reaching the blue screen than that means you have delayed in hitting the F8 key. start again from step 1.)
Step 4: As soon as you reach "Windows Advanced option" use your down arrow keys to choose an option called "Safe Mode".
Step 5: Select that and HIT ENTER.

Step 6: If you able to login then try accessing System Restore.
Step 7: Click on Start and then click on All Programs.
Step 8: Choose Accessories and then System Tools and System Restore.
Step 9: Run the wizard by choosing "Restore My computer to an Earlier stage"
Step 10: Choose a date displayed in Bold in the calender.
Step 11: Your computer would reboot and wait until the restoration completes.

Hope this helps.



Dec 27, 2010 | Acer Aspire One PC Notebook

1 Answer

I am facing problem with my Samsung LCD monitor, when I switched on my Computer it shows the bootup screen, after booting the LCD screen goes blank, when i turned off the monitor and again turned ON the...


Try to do this: Just before the Windows start up screen (after the bios loading) press F8 and log in at safe mode settings. If at this mode you can see your screen change the resolution settings at a lower set. Save and reboot normally. Now try step by step to increase your resolution. In case of a blank screen appears at a new setting, don't do anything; after some seconds the monitor will come back to the previous settings. Save and go on.

In case of a problem or clarification, don't hesitate to post.

Thanks and regards
Please kindly rate this solution
Stelios

Mar 05, 2010 | CTX S762A 17" LCD Monitor

1 Answer

Blue screen with error message on startup


Most likely problem is a physical problem with the hard drive, but could be plenty of other things. Best bet is to back up your information (if possible) and do a fresh windows install, if you continue to get the message after a clean windows install, your hard drive is not stable, and has a problem.

Dec 30, 2008 | Dell Inspiron 6000 Notebook

1 Answer

Blue lines on Display seen.


that is easy just go to rooftop of the building and throw you loptop ok

Oct 19, 2008 | Toshiba Qosmio F25-AV205 Notebook

3 Answers

Blank Screen


Same Problem. I fixed mine with a baseball bat, hammer, and a cold beer. Lesson learned: NEVER BUY DELPHI AGAIN. NEVER..... Tell your friends. Delphi = POS

Aug 10, 2008 | Delphi NAV200 GPS Receiver

1 Answer

3yr old got ahold of monitor


ok, get to the event where you get this to happen "...then turn it back on the monitor does come on normally...", but just after power-up, press the F8 key to go to safe mode. If nothing visible, press ENTER anyway...get to safe mode yet?

Oct 27, 2007 | Computers & Internet

2 Answers

Laptop boots up intermittently or screen freezes


basing on the information you have given here are the possible solutions:
remove any external device connected to your system (printer, external hard drive and others) if removing this does not work and still gets a blank screen with blinking cursor try to go to safe mode with networking. if successful try to download the driver for your video adapter.

when you try to start the computer , do get anything on the screen like a logo? when does the blank screen occurs, is it during the turning ON of the computer or during the windows xp logo appears on the screen?

a blank screen could be caused by the following: defective video adapter, corrupted video driver, defective memory, unknown device causing the issue like the hard drive, optical drive or other peripheral installed inside the computer.

try also using an external monitor

Sep 19, 2007 | Toshiba Satelite 5205-S505 Notebook

2 Answers

Monitor Goes Black


Try to start in safe mode and check if you can change some of the video settings (resolution, refresh rate, etc). Maybe one of these settings is such that the monitor cannot handle properly. To get into Safe Mode, press F8 as soon as you see the Gateway logo on the screen while booting the PC.

Aug 08, 2007 | Gateway FPD2275W LCD Monitor

Not finding what you are looking for?
Dell Inspiron 9300 Notebook Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...