Question about Kenmore Washing Machines

1 Answer

Kenmore Elite He3 leaves water in the drum at end of cycle.

Once in awhile, when taking clothes out to put into the dryer we notice there is a pool of standing water in the bottom of the washer. I had to replace the motor and the plastic wash-out part recently because the plastic was cracked, so the problem is not caused by that. When the cycle is running, no error codes appear on the washer either. Does anyone know how to fix this?

Posted by on

  • Kirk Wolf Mar 05, 2009

    I haven't been able to try replacing this part yet, but plan to soon. I'll keep you updated if this works.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Kenmore Master
  • 2,651 Answers

Sounds as if you need to replace the water inlet valve. one ofthe solenoiidsis not closing properly allowing watyer to to trickle in when not in use, until you get thisfixed you can turn off water supply to unit in between washes

Posted on Mar 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Kenmore Elite HE3 Mod 11044832 202 started making LOUD knocking noises during final spin cycle, then started to smell like something burning. Whit placis shreds in the washer.


the plastic is the drum has dropped so its eating a way the plastic on the back of the drum so no not worth fixing the mould is an easy fix just soke a cloth with neat bleach and leave over night make sure you do a rines after woulds as you don't want bleach on your cloths ok

Oct 21, 2012 | Kenmore 44832 Front Load Washer

1 Answer

Kenmore Elite HE3 front loader F-11 and FDL codes


yes!! the F/11 is triggered under high voltage conditions like high speed spinning. The part is called the MCU motor control unit. if it goes into failure while using your machine and locks the door, just wait 3 minutes and the door will unlock after the MCU resets. Try using you machine with a low speed spin for awhile.

Oct 29, 2009 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore Elite front-load


you must remove bottom panel ,,in the center front you will find pump,,remove pump filter,,always unplug first..it has slugg,..than after you clean filter run your unit once a month with a pint of bleach and hot water only..also wipe your rubber gasket or bellows with a touch of bleach..

Dec 27, 2008 | Kenmore Elite 45986 Front Load Washer

2 Answers

Dryer not heating he3 kenmore elite


repl/ thermal fuse if no heat if heating for a little while clean exhaust, and repl/ coils

Dec 20, 2008 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

1 Answer

Kenmore HE3 Front Load Washer - Leaking Water into wash tub


THE WATER VALVE IN THE WASHER HAS TO BE REPLACED THE COST OF THE WATER VALVE IS ABOUT $25.00

Dec 14, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore Elite HE3 44832


sounds like the drum is not revolving at all on the spin cycle Could be quite a No of things, ie belt off or broken, motor carbon brushes need replacing, timer fault, speed control module fault, or even a broken wire or loose connection somewhere etc etc.

 Does it revolve on the WASH cycle? If so we can probably eliminate the above, in which case come back to me. Sorry no idea how much it will cost to fix. Have a look see what you find re above

Oct 18, 2007 | Kenmore Elite 45986 Front Load Washer

1 Answer

Not Drying


Had the same issue with my Whirpool. If the clothes are getting hot but not drying then there might be a build up of lint in the exhaust duct and/or passage. Once I replaced the the duct and ran a snake with a brush through the passage (my dryer was on 1st floor, vent ran up to 2nd) and cleaned out the lint build up in filter area it worked like new. Also keep in mind if you use dryer sheets they will leave an invisible residue on your lint filter thus restricting airflow. This can lead to the heating element burning out. The lint filter should periodically be scrubbed with a soft brush (an old toothbrush will do) under warm water with detergent (I use Dawn). This should keep the airflow moving through the dryer instead of keeping it in the drum. Hope this helps.

Oct 11, 2007 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

1 Answer

Kenmore Elite HE3 washer


set the washer to fill. open the lid and depress the lid switch. might be in the rear of the cover or on the side. watch to see where the water level comes to. once the tub is filled, the water height switch operates the timer motor for the different cycles.

Sep 10, 2007 | Kenmore Elite 45986 Front Load Washer

1 Answer

Kenmore Elite Fronloader Water Problem


the water inlet solenoid valve has debris stuck inside of it, thereby not allowing complete "off" mode. best to remove it and clean the water path thoroughly. valve is found by tracing the inlet water hose.

Jun 03, 2007 | Kenmore 46462 Front Load Washer

Not finding what you are looking for?

Open Questions:

0 Answers

Kenmore Elite HE4T Washing Machine Diagnostic Test Didn't complete and clothes aren't spun as dry as in the past I have a Kenmore Elite HE4T washing machine and I noticed that recently it isn't getting all of the clothes completely dry from the final spin cycle. Thus, the dryer has to run through two cycles to get the clothes dry. I did a bunch of research and made sure there weren't any kinks or blockages in the drain lines; and opened up the bottom of the washer and cleaned out the drain cleanout. I found a few pennies, but everything seemed to be working ok. I ran a load and had the bottom open so that I could make sure the motor, drain and belt were all working properly. The drain does get the water out of the washer, so the clothes aren't sitting in water, they just don't seem to be spun as fast or as long as they used to. I always put it on the "extra high" spin setting no matter which type of load I run. So, I found a way to run the diagnostic test on the washer and it went through C0-C5 (the agitation step) and all worked great, until it wouldn't come out of C5 after at least 10 minutes and go thru C6-C8. I had to cancel the diagnostic test and hit the "drain and spin" button to get all of the water back out of the washer. BTW, the "drain and spin" seems to get the clothes a bit drier than when I have it run through the "normal" cycle with the "extra high" spin. If anyone has any other thoughts, I would really appreciate it. This unit is in a small space with the dryer attached so to take it out and do repairs is a pretty big hassle. It has had a new control board and two new fill valves in the 10+ years that I have owned it. Questions I have: 1.should I remove the entire drain pump to make sure there isn't anything lodged in it? 2. could it be the belt slipping slightly and keeping the spin from reaching its 1200 RPMs? 3. Anything else I may be missing???

Jan 17, 2017 | Kenmore Washing Machines

Washing Machines Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...