Question about Zenith C27A24T 27" TV

1 Answer

I accidentally put my zenith model SLS2751Y tv in service mode with the 9876 code then i accidentally locked it to channel 4, now my remote wont go into service mode cuz the channel is locked. i tried leaving it unplugged for two days same thing. any way to reset it again i dont care if i need to snip a capacitor i just need to know wich one?

Posted by on

  • 1 more comment 
  • Neuromancer1
    Neuromancer1 Mar 02, 2009

    what is your im or email

  • Neuromancer1
    Neuromancer1 Mar 02, 2009


    j73kw129 what is you i.m. or email so i may contact you by the way check you vehicle problem i posted a possible diagnosis

  • cindymccord Mar 30, 2009

    I have a Zenith H2532YA that was bought from a hotel and researched to find out how to get into service mode to unlock it... couldn't figure it out and also locked the computer up and not i can't get it out of service mode nor get the remote to work... Any suggestions?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

This question need a long explanation.email me and ormeet me on line were we can take it step by step

Posted on Mar 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

If i buy a universal remote control for a replacement for the original of the zenith 1996 model sy2568s tv, will it work?


I should. Universal remote codes to check with Zenith are: 0121 0009 0050 0078 0091 0138 0059 0131 0038 0111 0134 0153 0064 0004 0135 0226 0227 0245 0247 0252 0266 0288 0310 0338 0358 0023 0058 0039 0001
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Sep 18, 2012 | Zenith SY2568S TV

1 Answer

I need to reset the password for my zenith tv model # C27J28B


If you did forget the code to release V-chip to this TV, there is no other way than contact its authorised service center. If you want to unlock the child-lock to certain channels:

1
Press or to display the password entering mode.
Press MENU, then press or to display the (LOCKS) menu.
2
Use the number buttons (0-9) to enter your password,
then press ENTER. The LOCKS menu appears.
3
Press or to highlight CH LOCK and press or to display
the CH LOCK menu.
4
Press or to highlight CLEAR and clear all channels from the
list of locked channels. Press ENTER.
5
6 Press EXIT to return to normal viewing.

Jul 04, 2012 | Zenith Televison & Video

1 Answer

Setup a one for all remote what is the 4 digit code number for my tv I have a 1997 Zenith


Hello
I've only only one digit code with me. It is "0634". It is the remote code for Zenith HDSAT_420, HDSAT_520, HDSAT_1080. Sometimes this may work with your TV also.

Proceedings

  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
*******************************************************************************************************************


  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.

Oct 23, 2010 | Zenith C27A24T 27" TV

2 Answers

Zenith h25w35dt cant unlock auto program


USE ZENITH REMOTE HOLD DOWN MENU BUTTON UNTIL THE OSD DISSAPEARS THEN HIT 9876 ENTER CHANGE P/L SETTING IN FACT. MENU

Apr 08, 2009 | Televison & Video

4 Answers

Unlockin all the channels


In order to get all the channels u have to have the original remote or a universal remote that has a menu button, an enter button, and directional pad (the directional pad cannot control the volume and channels it must be for navigating). push and hold the menu button, the menu will appear then disappear, once it disappears release the button and enter 9876 then press enter. a different menu will appear and it will b three black lines, one at the top of the screen, one in the middle and one at bottom. the middle line has 3 sections the first part is the item number the second part is the description and the last part is the on/off switch using either a 0 or 1. push down on the directional pad until u get to the 00 factory settings 0 and change the 0 to a 1 with the right button on the directional pad. then scroll up to 20 channel lock 0 (i think its 20, it may be like 22 but it is in the twenties for sure) and change the 0 to a 1. then go back down to the 00 factory settings and change the 1 back to 0 then turn the tv off. when u turn the tv back on it will either automatically ask u to auto tune or u will have to go to auto program to program the channels. there are like 80 different menu items, be sure not to mess with any other ones unless u know what ur doing, u could cause ur tv not to function properly or even be able to turn on.

this problem frustrated me greatly and im very happy to help whoever i can with the solution

Feb 07, 2009 | Zenith C27A24T 27" TV

4 Answers

Zenith Concierge hotel tv wont work with my xbox 360


I doubt the TV even has a tuner if it is designed for a hotel. It may be a "dumb" receiver, nothing else. Do to channel 2 and then press the down arrow for channel, does it flip to 138 or AV1?

Mar 19, 2008 | Zenith C27A24T 27" TV

3 Answers

Zenith Concierge H25W35DT 27"


The CORRECT answer is you must purchase a LP702 remote. Google it to find one to buy. You must unlock channels and program the channels fresh.
Some standard zenith remotes allow you to reset the tv by popping off the cover of the remote and pressing an unmarked button.

Mar 09, 2008 | Zenith C27A24T 27" TV

1 Answer

Zenith SR3238RK


You have to access to the service mode , press at the same time channel up & down and the adjust button up , you will see a menu, find with the remote the funtion channel lock the values are 0 or 1 select 0, now Should be in 1 and that`s because you can not change channels , good luck , please dò not change any other value or better, writte down all the values before you change any.

Dec 29, 2007 | Zenith C27A24T 27" TV

4 Answers

Unlock code


one konka code which I know is press (SLEEP) button on remote handset& (MENU )BUTTON ON FRONT PANEL OF TV SIMULTANEOUSLY. the tv receiver will enter in to service mode. please try if it helps good luck.

Sep 16, 2007 | Konka K1938U 19" TV

3 Answers

Zenith H2533Y TV Entering Service Mode


wHEN YOU GET THE MENU UP YOU HAVE TO HOLD THE MENU BUTTON DOWN UNTIL THE MENU DISAPPEARS THEN ENTER 9876 ENTER. YOU CAN ALSO JUST AUTO PROGRAM THE SET AND IT WILL COME OUT OF SERVICE MODE.



LADY TECH

Aug 31, 2007 | Zenith C27A24T 27" TV

Not finding what you are looking for?
Zenith C27A24T 27" TV Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69763 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...