Question about Alpine IVA-D300 Car DVD Player

2 Answers

My antenna was cut off in an effort to remove my IVA-D300

Is there an adapter of some sort that i can use to connect the antenna wire protruding from my IVA-D300, which consists of several wires to the existing stock antenna on my new 99 chev p/u? if not, what exactly is this type of antenna wire called and where could i purchase one?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 33 Answers

There are connectors for that that I beleive are solder on, the link is below. It is basically coax cable and the way i have fixed them in the past is to take a basic ant extension and then cut it and with the side I need (M or F) strip the insulation and seperate the wire and then solder them together and wrap them in electrical tape. There are two leads, the positive which is in the center and the negative on the outside. You can purchase one of these extensions from any car audio shop or you could also take the radio to a car audio shop and have them do it as well. The shops usually don't sell the regular solder on ends as in the link below. And these guys only sell them in 5 packs. See the UV-45 in this link. http://www.installer.com/antenna/

Posted on Mar 02, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 149 Answers

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Do you need to connect the yellow and red wires together if not used in a car on a pioneer DEH-X1950UB


Yellow - Connect to the constant 12 V supply terminal.
Red - Connect to terminal controlled by the ignition switch (12 V DC).

Jan 11, 2017 | Pioneer Car Audio & Video

2 Answers

JVC KD-R316 install in Valiant Regal I'm replacing the stereo in my car, it had an aftermarket system. The new unit has power and will show display and eject disc but won't turn on. Where did I messup


Envision how just a simple mouse pad could protect you from health problems that would definitely price you. Why not consider precaution when you still can other than offer with an issue, which you could have averted in the first place. Cell Telephone Accessories That You Ought To Have AmanStino

Jan 09, 2017 | JVC Car Audio & Video

2 Answers

Where can I find the memory wire for the radio


Car radios don't have a 'memory wire'. Memory is held in integrated circuit chips called EPROMS, (electronically programmable, read only modules).

Jan 08, 2017 | Car Audio & Video

1 Answer

I have a boss 400w riot 2-4 channels,how do i connect the high level wires? Because stereo doesn't have rca's


to use the high level leads, you have to isolate the wires going to each speaker (if using 4 channel mode) or isolate the wires going just to the rear if you are using 2 channel mode. you have to strip a small piece of the insulation off each speaker wire, and run it into the amps high level input harness. if you dont have the high level input harness, you can get a 2 channel high level to rca adapter for around $20. basically, you are tapping into the signal to the stock speakers to feed music to the amp. make sure you get all your positives and negatives correct. brighter wires are usually positive; however you may be faced with sa speaker which uses a grey wire, and another grey wire- the second with a black line. you will have to, again, turn to internet research to determine which is positive and negative, if the colors are not obvious.

Dec 30, 2016 | Boss Car Audio & Video

1 Answer

Where can I find the connections the go on the back of the stereo


Usually behind the stereo in the console. Either a square or rectangle in shape. You can obtain adapters for differing units that allows the use of the original wiring harness without rewiring. Just a simple plug and play option.

Jan 01, 2015 | Car Audio & Video

1 Answer

Fm works, am does not


Check the antenna connection. A poor connection will often be good enough for FM but make AM reception so bad the the radios auto-gain circuits will mute the output unlike old AMs that would just produce loud static in poor signal conditions.

Apr 17, 2014 | Car Audio & Video

2 Answers

JVC KD-R330 Won't turn off Demo mode - tried instructions. Every time I follow the instructions (Turn on, Hold Menu, push "vol" button, change to Demo off...etc) It doesn't work. In fact, as soon as I...


Hi,

Do you have a Bluetooth adapter plugged into the KD-R330?

A compatible Bluetooth adapter (like the KS-BTA100) usually plugs into the rear auxiliary port of the receiver. It then needs to be "paired" with your Bluetooth device, for example, a Bluetooth phone headset.

What you're describing sounds like what can when no Bluetooth device has been "paired" yet.

If you don't HAVE a Bluetooth adapter connected to your KD-R330....is it possible you accidentally plugged something into its rear auxiliary jack? Or the front auxiliary? In other words, is it possible your KD-R330 receiver is mistaking some other device for a Bluetooth adapter?

Don't know if that helps at all...if there's no adapter issue, and nothing connected to the AUX jacks, probably your next step should be a call to JVC, or whatever number you were given for tech support.

On the bright side, since the receiver turns on, and responds to some commands, you probably didn't mess up anything major in the wiring. And, there's also the possibility the receiver is defective....certainly if this continues, and JVC can't help you, trying a replacement might be worth a try.

BTW, feel free to post a reply...I'm going to look further to see if there's any other documented issue besides an adapter that might cause the problem you're having.

Oct 29, 2013 | JVC Car Audio & Video

2 Answers

No power to amp


check and try finding another grounding spot

May 16, 2010 | Lightning Audio B4.250.2 Car Amp

3 Answers

Lightning audio b150.2 as soon as +12 is hooked up blows 25 amp fuse and the c2 1000uf/35v capacitors blow???????


Disconnect all speaker connections and rca cables. Leave power, ground and remote wires intact. Try turning on again. If you still have a protection light your amp is faulty. Hopefully you have warranty. Double check all connections .A thumbs up would be greatly appreciated if this answer is helpful to you.

Aug 25, 2009 | Lightning Audio PC2 Capacitor Car Audio...

Not finding what you are looking for?
Alpine IVA-D300 Car DVD Player Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Alpine Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4724 Answers

Tygh Duval
Tygh Duval

Level 2 Expert

290 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Alpine Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...