Question about NetGear WGB111 Wireless Kit

1 Answer

LOOKING FOR AN ONLINE USER MANUAL FOR NETGEAR WGB11GR ROUTER. IM SURE ITS A MODEL SOLD ONLY IN EUROPE

Posted by on

  • 1 more comment 
  • Carl Navarro
    Carl Navarro May 11, 2010

    A jpg of the tag on the bottom of the router. What country you're in, you know the basic stuff besides a model number that isn't in the U.S. Netgear database.



  • Carl Navarro
    Carl Navarro May 11, 2010

    Here's a thought. Look at the tag carefully then go here.

    http://www.netgear.com/Countries.aspx

  • pbeck May 11, 2010

    I can't locate ANY information on "WGB11GR"

    What specific information are you looking for?


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 854 Answers

Try this instead

Here are some troubleshooting steps that I suggest you try:

1. Check physical connections.

a. Connect the modem to the Internet port of the router. The Internet “i” LED on the front of the router should light up.
b. Connect the computer to one of the four LAN ports (i.e port 1, 2, 3 or 4) on the back of the router. The corresponding port light where you connected the computer should be lit up.

2. Access the router's web-based utility.

a. Please open any web browser like Internet Explorer or Netscape Navigator.
b. Connect to the router by typing http://routerlogin.com/basicsetting.htm or http://192.168.1.1 or http://192.168.0.1 or http://192.168.2.1 in the address field and click Enter or Return key.
c. A window will prompt for a user name and password. By default, the user name is "admin" and the password is "password".

Note: If you were unable to access the router's web-based utility, you may reset the router to restore the settings to factory default.

To reset the router:

a. Please push the reset button at the back of the router and release after 30 seconds.
b. Unplug the power adapter for 10 seconds and then plug it back in.

3. Configure the router.

If your Internet Service Provider is using a cable connection, please follow the steps below:

a. Click on Basic Settings under Setup tab.
b. Select No for Does Your Internet Connection Require A Login?.
c. Scroll down on the center page and look for the Router MAC Address section. Set it to Use computer MAC address and click on the Apply button.

If your Internet Service Provider is using a DSL connection, please follow the steps below:

a. Click on Basic Settings.
b. Select Yes for Does Your Internet Connection Require A Login?.
c. Select Other on the Internet Service Provider drop down box.
d. Enter your ISP's username (username@ISPdomain) and password. Then, click on Apply.

4. Configure the wireless settings.

a. Click on the Wireless Settings under Setup.
b. Change the SSID to any unique name.
c. Scroll down, look for the Security Options settings and select WEP (Wired Equivalent Privacy).
d. Set the Authentication type to "Automatic" and the Encryption Strength to "64bit".
e. Leave the Passphrase field blank, select Key 1 and enter a 10-digit number.

Note: The 10-digit number you typed in the key 1 will be the password or network key for the wireless connection.

f. Click Apply button to save the changes.
g. Go to Router Status under Maintenance tab and check if there is an IP address under Internet port. If it's 0.0.0.0, do a power cycle.

5. Power cycle.

a. Power off the modem, router and computers.
b. Turn on the power of the modem first and wait for it to initialize, the lights to stop blinking.
c. Power back the router and the computers. Check if it will be able to get online.

If you have wireless computers, you can connect them wireless to the router. Kindly follow the instructions below:

6. Connect wireless computer to the router.

If you are using Windows XP with Service Pack 1, please follow the steps below:

a. Please right click on the Wireless icon on the right lower end portion of your computer.
b. Then click on View Available Wireless Networks.
c. Click on the Advanced tab.
d. Please delete all the preferred networks then click on OK.
e. Right click on the Wireless icon again and click on View Available Wireless Network. Please select your network and click on Connect. It will ask you for the network key.
f. Please type in the network key and then confirm it. Network key is the password you type on the key 1 of the wireless settings of the router.
g. Make sure not to enable IEEE and then click on Connect.

If you are using Windows XP with Service Pack 2, please follow the steps below:

a. Please right click on the Wireless icon on the right lower end portion of your computer.
b. Then click on View Available Wireless Networks.
c. Click on the Change Advanced Settings.
d. Click on the Wireless Networks tab remove all the preferred networks then click on OK.
e. Right click on the Wireless icon then click on View Available Wireless Networks.
f. Select your network and click on Connect.
g. It will ask you for the network key. Type in the network key and confirm it. Then click on Connect. Network key is the password you type on the key 1 of the wireless settings of the router.

If you are using Windows Vista, please follow the steps below:

a. Click Start then select Connect To.
b. Connect to a network window will show up.
c. Select your wireless network and click Connect.
d. It will ask you for a network key. Type in the network key and confirm it. Then click on Connect.

From the above configuration, please check if you can now access the Internet.

Posted on Aug 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Net gear wireless router N150 router WNR1000


Looking for the NETGEAR WNR1000 default password?

You probably have little reason to access your router on a regular basis so don't feel too bad

f you've forgotten the WNR1000 default password.

However, when you're troubleshooting a network problem and need to get in to the device,

the WNR1000 default password suddenly becomes very important.

For most versions of the NETGEAR WNR1000, the default password is password. As with most passwords,

the WNR1000 default password is case sensitive

Be sure to change the default router password on your WNR1000 to something more secure as soon as you're in.

Then use a free password manager so you'll never forget your new WNR1000 password
hope this helps

Jul 25, 2012 | NetGear WGR614 Wireless Router

1 Answer

NEED THE WPA2 PASS PHRASE


You will need to log into the router and get to the wireless tab or wireless settings to see it. To log into your router you will need the router's ip address, userid and password. The manual will give you this info. Read the Manual.

Get online and got to www.google.com In the google search box type: "Netgear Support" (without the quotes and put your manufacturer name before Support). Look for downloads and drivers. Enter your model number and operating system when requested. Look for Manuals.



According to your manual the network key is on a label affixed to the router unless you changed it.



http://www.downloads.netgear.com/files/WNR1000v2h2_IGPM_16MAR2011.pdf



To log into the router, the address is:

http://routerlogin.net

The default user name is: admin

The default password is: password

Jun 04, 2012 | NetGear WNR1000 Router

3 Answers

Netgear router reset


You can reset your Netgear router/wireless DG834G router to the factory settings from within the router manager. The reset procedure removes all user-configured settings and returns the router to the original factory settings.

For this reason, only reset the router if you encounter problems that can't be solved with other methods.

Step 1: Check that your Netgear router/wireless DG834G router is properly connected with your system or not. If it is OK, then press reset button on Netgear router for at least 10 seconds. The 'test' light should flash during this process.

Step 2: Now open browser and enter Netgear's IP address into the address bar. Generally, '192.168.0.1' is the Netgear router IP address but you can find specific IP address in Netgear router manual.

Step 3: Now enter your default username and password to log in to router.

Step 4: Click 'Erase' button under the 'Revert to Factory Default Settings'. This process will erase all your previous changes that have been made to the router and restore the configuration settings to factory setting. Don't interrupt the process until the process is finished.

Once the router's 'test' light has stopped blinking and the configuration page you are on has refreshed, the router has been reset.

Feel free to get instant online Netgear router support at http://www.vtechsquad.com/netgear-router-support/ to fix Netgear router/wireless router issues.

Feb 06, 2012 | NetGear DG834G Router

2 Answers

How do i set up my router? model # WPN824


Hi,
Check this url http://static.highspeedbackbone.net/pdf/netgear-WPN824-manual.pdf.

Oct 26, 2010 | NetGear RangeMax WPN824 Wireless Router...

1 Answer

Netgear WPN824 router


You can set up your router manually, without the CD.
Make sure that your computer is able to go online directly through the modem.
If your computer is able to go online through the modem, that means the modem is working fine.
You will need to connect the computer to the router and the modem to the router.
open the set up page of the router and change the settings of the router according to the ISP.

Click Here for more information about the routers and network

Jun 24, 2010 | NetGear RangeMax WPN824 Router

2 Answers

Hot to reset the seting to default


You can reset your Netgear router to the factory settings from within the router manager. The reset procedure removes all user-configured settings and returns the router to the original factory settings.

For this reason, only reset the router if you encounter problems that can't be solved with other methods.

Step 1: Check that your Netgear router is properly connected with your system or not. If it is OK, then press reset button on Netgear router for at least 10 seconds. The 'test' light should flash during this process.

Step 2: Now open browser and enter Netgear's IP address into the address bar. Generally, '192.168.0.1' is the Netgear router IP address but you can find specific IP address in Netgear router manual.

Step 3: Now enter your default username and password to log in to router.

Step 4: Click 'Erase' button under the 'Revert to Factory Default Settings'. This process will erase all your previous changes that have been made to the router and restore the configuration settings to factory setting. Don't interrupt the process until the process is finished.

Once the router's 'test' light has stopped blinking and the configuration page you are on has refreshed, the router has been reset.

Get instant online Netgear router
support at http://www.vtechsquad.com/netgear-router-support/ to fix Netgear router/wireless router problem.


Get help for recover your lost wireless router password >>

May 12, 2009 | NetGear WGR614 54 Mbps Wireless Router -...

1 Answer

Hello, can you help me please?


i have need to reset my router so i can get online and im looking for help.can you tell me how to get online

Jan 11, 2009 | NetGear WIRELESS-G WGR614 802.11G WIRELESS...

3 Answers

I lost my CD


You can reset your Netgear router/wireless MR814 router to the factory settings from within the router manager. The reset procedure removes all user-configured settings and returns the router to the original factory settings.


For this reason, only reset the router if you encounter problems that can't be solved with other methods.


Step 1: Check that your Netgear router/wireless MR814 router is properly connected with your system or not. If it is OK, then press reset button on Netgear router for at least 10 seconds. The 'test' light should flash during this process.


Step 2: Now open browser and enter Netgear's IP address into the address bar. Generally, '192.168.0.1' is the Netgear router IP address but you can find specific IP address in Netgear router manual.


Step 3: Now enter your default username and password to log in to router.


Step 4: Click 'Erase' button under the 'Revert to Factory Default Settings'. This process will erase all your previous changes that have been made to the router and restore the configuration settings to factory setting. Don't interrupt the process until the process is finished.


Once the router's 'test' light has stopped blinking and the configuration page you are on has refreshed, the router has been reset.


Feel free to get instant online Netgear router support at http://www.vtechsquad.com/netgear-router-support/ to fix Netgear router/wireless router issues.

Oct 17, 2007 | NetGear MR814 Wireless Router

Not finding what you are looking for?
NetGear WGB111 Wireless Kit Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts

Barry37

Level 1 Expert

31 Answers

MrNutsy

Level 1 Expert

36 Answers

Phillip Whisenant
Phillip Whisenant

Level 2 Expert

120 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...