Question about Dell 926 All-In-One InkJet Printer
Replacing Ink Cartridges 1. Turn on your printer. 2. Lift the printer unit. 3. The ink cartridge carrier moves and stops at the loading position unless the printer is busy. 4. Press down on the ink cartridge lever to raise each ink cartridge lid. 5. Remove the old ink cartridges. 6. Store the cartridges in an air-tight container, such as the storage unit you received with your photo cartridge, or dispose of them. 7. If you are installing new ink cartridges, remove the sticker and transparent tape from the back and bottom of each ink cartridge. 8. Insert the new ink cartridges. Make sure the black or photo ink cartridge is secure in the left ink cartridge carrier and the color ink cartridge is secure in the right ink cartridge carrier. 9. Snap each lid closed. 10. Close the printer unit. 11. An alignment page automatically prints.
Posted on Mar 02, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 09, 2011 | Dell 926 All-In-One InkJet Printer
Mar 09, 2011 | Dell 926 All-In-One InkJet Printer
Open the Dell 926's front cover with the power on and wait for the cartridge carriage to come to a stop. Remove the ink cartridges by pressing on the tabs at the top of each cartridge. Check the cartridges to make sure you have removed all of the blue protective plastic film. Look for the "Dell" logo stamped into the cartridges' lids to ensure they are genuine cartridges.
Clean the shiny metal portions of the ink cartridges with a damp microfiber cloth. Allow each cartridge to dry completely.
Clean out any paper, staples or other debris that you may be able to see, then reinsert the cartridges into their appropriate slots. Put the black ink cartridge into the left slot and the color cartridge into the right slot. Make sure both click back into place.
Close the Dell 926's front cover and turn off the printer. Unplug the power cord and USB cable from the printer for five seconds, then reconnect them.
If your Dell 926 fails to recognize the print cartridges after following the above instructions,
take it to a repair shop for servicing.
Good Luck and Happy Printing
Jan 26, 2011 | Dell 926 All-In-One InkJet Printer
Dec 11, 2010 | Dell 926 All-In-One InkJet Printer
Apr 10, 2010 | Dell 924 All-in-One InkJet Printer
Mar 10, 2010 | Dell 962 Photo All-In-One InkJet Printer
Jan 11, 2010 | Dell 926 All-In-One InkJet Printer
Jan 01, 2010 | Dell 926 All-In-One InkJet Printer
May 03, 2009 | Dell 926 All-In-One InkJet Printer
Apr 02, 2009 | Dell 926 All-In-One InkJet Printer
Jun 28, 2014 | Dell 926 All-In-One InkJet Printer
405 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: