Question about Saeco Talea Giro Espresso Maker - Titanium/Silver

1 Answer

Saeco Talkeo Giro

Red light looks like heat element symbol wont turn off, the coffee machine still works.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Indicates that descaling needs to be carried out. To cancel Press and hold the hot water button until indicator light goes off (about 6 seconds)

Posted on Aug 24, 2012

6 Suggested Answers

The Jed
  • 42 Answers

SOURCE: Need manual for Saeco Odea Go

You can downlaod the manual from this link:
http://www.saeco-usa.com/en/manuals/manuals.html

Hope this helps.

Posted on Aug 24, 2009

SkinWill
  • 148 Answers

SOURCE: Red alarm flashing

The flashing indicator light means something needs to be refilled or emptied.

Posted on Oct 15, 2008

EsWorld
  • 1618 Answers

SOURCE: I have a saeco Talea Giro machine. When I press

Check the screen on the brew unit, it might be blocked. If the brew unit is cleaned and the problem is still happening then the steam valve needs to be rebuilt because the pins are allowing the water pressure to pass through.

Posted on Oct 07, 2009

  • 81 Answers

SOURCE: New Saeco Odea Giro machine not working

That is the machine is saying to empty the drip tray, pull out the tray on the side and wait until the red light start flashing then put back the tray.

Posted on Jan 21, 2010

  • 81 Answers

SOURCE: My Saeco Talea Giro have the wave like symbol with

It is saying..it's time to descale the machine. If you want to get rid of it, just press the water button and hold it for 5 secs.

Posted on Feb 05, 2010

  • 6 Answers

SOURCE: Flashing Red bulb

That is the descale light, you should run a descale through the machine. After you have done that hold on the water button and the descale light will go away

Posted on Jun 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Saeco coffee machine with a red blinking exclamation point light won't make coffee, how do I fix it?


When the red exclamation point is flashing slow, something is not where it is supposed to be, bean hopper lid, door, brew mech, water tank empty, dregs box or water tray on dregs container is full. If the red exclamation point is flashing quickly, open the steam valve for pump priming. If pump turns on, and water passes correctly, the light should go off and return to heating stage. If not, we have a blockage or a pump that is not working correctly.

Nov 16, 2015 | Saeco Odea Giro Plus Coffee Maker

1 Answer

Flashing Red bulb


That is the descale light, you should run a descale through the machine. After you have done that hold on the water button and the descale light will go away

Jun 26, 2010 | Saeco Odea Go

1 Answer

Red light is on (looks like an M) and I don't know why??


It means time to descale , however if you want to get rid of it, just press and hold the water button until it goes off.
To descale..fill the container with descaler and let water goes through the system by openning the valve and catch the descaler with a container. Turn off the machine a few minutes and start the process all over again for 1/2 hr, and finally with water to wash the system.(donot want to heat up the descaler too much)

May 27, 2010 | Saeco Odea Giro Plus Coffee Maker

1 Answer

My Saeco Talea Giro have the wave like symbol with three parallel lines is flahing red. What is wrong and what can I do to fix it.


It is saying..it's time to descale the machine. If you want to get rid of it, just press the water button and hold it for 5 secs.

Jan 30, 2010 | Saeco Talea Giro Espresso Machine

2 Answers

Re Odea Giro Plus - Cannot stop the red alarm


The problem is with the flow meter which is a turbine unit that is installed before the pump.Either there is a blockage or the unit is bad.Have to open the machine to get into it.

Jan 06, 2010 | Saeco Odea Giro Plus Coffee Maker

1 Answer

New Saeco Odea Giro machine not working


That is the machine is saying to empty the drip tray, pull out the tray on the side and wait until the red light start flashing then put back the tray.

Dec 24, 2009 | Saeco Odea Giro Plus Coffee Maker

1 Answer

My Saeco Odea Giro has the element light permanently on (not flashing) and the strength light is set to 3, I cannot change it. I have tried descaling, cleaning etc. Any ideas?


The element light is saying it,s time to descale. Since you have done that you can remove it by holding down the water button for a few seconds until it goes off.The strenght light?.checked whether it is not sticking.

Dec 15, 2009 | Saeco Odea Giro Plus Coffee Maker

2 Answers

My Saeco Giro keeps flashing red, what's wrong?


Hold the water button in for about 15 seconds.

Mar 30, 2009 | Saeco Odea Giro Plus Coffee Maker

2 Answers

Saeco Giro Plus Bean Grinder Section Inoperative


i am facing the same problem. Please let me know if you can fix it. Thanks.

Mar 01, 2009 | Saeco Odea Giro Plus Coffee Maker

Not finding what you are looking for?
Saeco Talea Giro Espresso Maker - Titanium/Silver Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saeco Coffee Makers & Espresso Machines Experts

Ernest R
Ernest R

Level 3 Expert

1618 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Ray Murphy

Level 2 Expert

67 Answers

Are you a Saeco Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...