Question about Video Game Consoles & Games

1 Answer

BATTERY IS CHARGED, BUT SYSTEM DOES NOT RECOGNIZE BATTERY

BATTERY IS CHARGED

PSP UNDER BATTERY INFO IS ALL BLANK, EXCEPT IT SAYS EXTERNAL POWER

INTERMITTENTLY INDICATES FULLY CHARGED BATTERY IN UPPER RIGHT CORNER OF SCREEN

TRYING TO UPGRADE FIRMWARE, IT WILL NOT AS PSP
SAYS BATTERY LOW.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 36 Answers

This is a common problem. the battery itself is bad and needs to be replaced

Posted on Apr 30, 2009

  • Ilaya Kumaran Apr 23, 2013

    i had this same problem and i changed to a new battery, but the same problem occurred. i don't know what is the problem.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SpreadsheetHave old Lotus Symphony with over 50 friends on my Address List (9 columns of info on each).Can I transfer it to a simple address format to replace it? HELP (84 yr. old widow)


can you save as a csv file in the old lotus symphony ?
go to file
save as
then
select
type as
csv comma delimited

and this should be able to be imported on new spreadsheet program or computer .

Jan 11, 2017 | Lotus Video Game Consoles & Games

1 Answer

Having issues setting up the PS4 can't find the hdmi slot same size as the hdmi wire that comes with the console. Hdmi wire and tv shown in pic


  • Connect the included HDMI cable to your TV and the PS4's HDMI Out port Connect your console to your cable or satellite box Unplug the existing HDMI cable connecting your cable or satellite box to the TV and plug it into the PS4's HDMI In port Plug the PS4 into a power source Power on the PS4 Plug the controller into the PS4 using the included Micro USB cable Press the PS button on the controller to pair it with your PS4

Jan 10, 2017 | The Video Game Consoles & Games

1 Answer

My Wii intec induction charger model G5857 wont charge my Wii batteries.The charger worked 4 1 year.I don't know which is the problem.I don't want 2 spend more money on a new set of batteries/charger.


first are you now using li batteries or nicad batteries
small chargers are battery composition specific
secondly-- chargers for aa /aaa batteries are cheap so get a new charger for the batteries in use

Jan 08, 2017 | Intec Video Game Consoles & Games

1 Answer

I'm losing my connection...


It sounds like you've refused an Xbox Live Update at some point.
You can go into your system options and see if there's an update available.
To check for an update on the Xbox 360 you basically force a new Xbox Live connection:
  1. Press the Guide button (center logo button), bringing up the pop-up menu
  2. Go to Settings
  3. Select System Settings
  4. Select Network Settings
  5. Select Wired Network or the name of your wireless network if you're on wifi
  6. Select Test Xbox Live Connection
  7. Select Yes if prompted to update. If you're not prompted and the test completes successfully, you have the most recent update.
If that doesn't work try this link http://www.gamefaqs.com/boards/927749-xbox-360/67807343

Jan 08, 2017 | The Video Game Consoles & Games

30 Answers

My sons leapPad screen is cracked can i get it fixed or do i have to buy a new one


Hi, you can purchase on amazon Amazon com leappad screen replacement If can't find exact part, contact any vendor (probably someone can provide parts) Hope this was helpful.

Dec 27, 2011 | Video Game Consoles & Games

2 Answers

I cannot play fifa 1


upgrade ur cfw gen-D with promothues it will work if not then let me ........

Dec 22, 2010 | FIFA Soccer 11 for PSP

2 Answers

Cheat codes of fifa 10 in psp


  • Here is sme cheats to use
  • Easy FIFA pointsUse "Football IQ" to earn points quickly to spend at the store.

  • Easy money in Manager modeBuy players in "Free Agent", then sell them to other clubs.
  • Jun 23, 2010 | Video Game Consoles & Games

    2 Answers

    Fifa 09 servers down?


    Major problem with microsoftx-box live. I couldnt dowload stuff and after e-mail to them there is problems at their end.Try www.microsoftxbox.com for mpore info

    Mar 20, 2009 | Buck FIFA 09 for Xbox 360

    10 Answers

    PS3 cant go online with Belkin N1 wireless router


    I have exactly the same issue as some of you above. As soon as I start my PS3 I manage to log onto the network for anywhere between 2 seconds and 2 minutes before I get the dreaded 80710102 error and have to reboot the PS3 to reconnect. I wrote to Belkin tech support and got the following reply... I Haven't tried it yet so don't know if it really works but thought I'd post it up here in case it helps anyone else out...

    Hi Antony,

    Thank you for contacting Belkin Technical Support.

    We understand that the router does not support PS3. We apologize for the inconvenience caused.

    A) To isolate the problem, please follow the steps given below to update the firmware and configure the router:

    We recommend that you update the firmware from a computer that is connected to the router with an ethernet cable.

    Please download only the relevant firmware on the router from the link given below. The firmware file would be according to the router version:

    http://www.belkin.com/uk/support/article/?lid=enu&pid=F5D8635uk4A&aid=14489&scid=0

    and save it to the computer.

    - To update the firmware, log on to the router`s web interface by typing in http://192.168.2.1 in the address bar of the browser. The computer should be
    connected to the router with an ethernet cable.
    Note: If you have changed your Router’s IP address, use that IP address.
    - By default, the password is blank. Click the "Submit" button.
    - Click on "Firmware Upgrade" under the option "Utilities".
    - Click on “Browse” and select the bin file that you have downloaded.
    - Click on “update” and follow the wizard.
    - After updating the firmware, restore the router to factory defaults by clicking on "Restore Factory Defaults" under "Utilities".
    - Reconfigure the router.

    Please follow the steps given below for configuring the router:

    - Disconnect the computer from your Modem provided by your "Internet Service Provider" (ISP) if it is connected to the computer.

    - Reset the router to "Factory Defaults". The reset button is found at the back of the router. The reset procedure is,

    - Unplug the power cable and then plug it back again. Wait for 5 seconds.
    - Locate the reset button (inside a hole) at the back of the router.
    - Hold down the reset button till the power-light turns solid, and then release it.

    - Connect the router to either the telephone line or the filter.

    - Connect the computer to port number 1 of the router.

    - Make sure the corresponding lights are lit. The telephone light should be ON and solid.

    - Make sure your computer has a valid IP address by following the steps given below.

    1. Click on “Start” -> “Run” -> and type “CMD” and click “OK”.
    2. Type “ipconfig” in the black window and check the IP address.
    3. It should be in the range of 192.168.2.x, where “x” ranges from 2 to 254.

    - If it is not a valid IP Address, please assign a static IP address, "Subnet Mask", “Default Gateway" and "DNS Addresses" in the computer by referring to the link below.

    http://web.belkin.com/support/kb/kb.asp?a=2824

    - Please reset the Internet Explorer browser settings by following the steps below.

    - Open Internet Explorer. Click on “Tools” -> “Internet Options”.
    - Under the General tab, click on “Delete Files” under “Temporary
    Internet Files” and select "Delete all Offline content" box.
    - Click on “Clear History”.
    - Under the Connections tab, select “Never Dial a Connection” and
    click on “LAN settings”. Uncheck all the options and click on “OK”.
    - Under the Advanced tab, click on “Restore Defaults”.
    - Click on “Apply” and then “OK”.

    - Log on to router setup page by typing “192.168.2.1” in the address bar of the browser. By default the password is blank.

    - On the left under “Internet WAN”, click on the option "Connection Type".

    - Select “PPPOA”, (If it is ADSL)/ PPPOE (If it is DSL) and click on “next”.

    - Type in the user-name and password and then re-type the password given to you by your ISP. Make sure you type in the full user-name.
    For Example, the format for the User-name should be "yourusername@yourISP.com or .net"

    - Also confirm the settings of “VPI/VCI”, “Encapsulation” values from your Internet Service Provider (ISP) and configure the same.

    - Change the “MTU” to “1400”.

    - Click on “Apply Changes” button at the bottom. Wait till it saves the data.

    - Click on Home on the right top corner and then click on the "Connect" button. You should be able to go online.

    B) Configuration of PS3:

    Please contact Sony and assign static IP address and DNS on the PS3. The static IP address should be assigned in the range of the router. For example: 192.168.2.200. The IP address you assign should not be used by any other device on the network. Please confirm the ports to be opened for the PS3 from Sony.

    1) Please follow the instructions given below to forward the port numbers for PS3 on the router:

    - Please open the Internet Explorer and in the address bar type in "192.168.2.1" and "Enter". The computer should be connected to the router with an ethernet cable.
    - Leave the password blank and click on "submit".
    - Click on "Virtual server" under the "Firewall".
    - Enter the port number under "Inbound port" & "Private port".
    - Enter the Static IP address of the PS3 under the "Private IP address".
    - Check the "Enable" box and click on "Apply changes".

    2) Please follow the instructions given below to enable UpnP on the router:

    - Log on to the router web interface at http://192.168.2.1
    - By default, the password is blank.
    - Click on System setting under "Utilities".
    - Against the heading "UPNP Enabling", choose "Enable".
    - Click on "Apply changes".

    Note: The NAT feature on the router is enabled by default.

    If the problem persists, please get back to us with the following information:

    1. Type of connection provided by your ISP (Is it PPPOE, Dynamic or Static).
    2. Name of the Internet service provider (ISP).
    3. Version number of the router. You would find the version number on the bottom of the device. It would be a number in a series of thousands with a prefix “ver.”. Please confirm if the router is F5D8635?
    4. Using the router, if the connection is stable on all the wired and wireless computers?
    5. If the PS3 works fine with other networks?
    6. When does the error come up? If it comes up for both, CAT5 and CAT6 cables?

    Dec 06, 2007 | Sony Playstation 3 (PS3) Console

    Not finding what you are looking for?
    Video Game Consoles & Games Logo

    Related Topics:

    875 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Video Game Consoles & Games Experts

    Josh Whitehead
    Josh Whitehead

    Level 3 Expert

    1146 Answers

    yadayada
    yadayada

    Level 3 Expert

    63242 Answers

    Brad Brown

    Level 3 Expert

    13732 Answers

    Are you a Video Game Console and Game Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...