Question about Universal Televison & Video

6 Answers

CODE FOR TDE SYSTEMS UNIVERSAL REMOTE CONTROL

CAN'T FIND THE CODES FOR MY TDE SYSTEMS JUMBO UNIVERSAL REMOTE CONTROL

Posted by on

  • jess_belzile Apr 29, 2009

    Phillips Televison




×

6 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

CANNOT PROGRAM THE TDE SYSTEN=MS JUMBO REMOTE WITH CODES FOR A CITIZEN TV

Posted on Oct 06, 2010

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have remote model #33201048, which does not have a "code search" button. It also requires a 4 digit code---not 3, as some other models have. My method of finding the correct codes, is as follows.... 1. Turn on the device you wish to program. 2. Push the button ( TV, VCR, DVD,etc.) for the device, you wish to program...the red light will flash...continue holding the button down, until the light comes back on...and remains lit. 3. Point the remote at the device, and push the power button once. 4. The light will begin to flash, every 2-3 seconds, as it tries each code. 5. When the device shuts off, immediately push the button, you pushed to select your device. 6. The light should now go out...and the remote is programmed, for that function. 7. Other devices may be done, by using the same procedure...using the different device buttons.

Posted on Jan 26, 2013

  • Techwreck
    Techwreck Jan 26, 2013

    I have remote model #33201048, which does not have a "code search" button. It also requires a 4 digit code---not 3, as some other models have. My method of finding the correct codes, is as follows.... 1. Turn on the device you wish to program. 2. Push the button ( TV, VCR, DVD,etc.) for the device, you wish to program...the red light will flash...continue holding the button down, until the light comes back on...and remains lit. 3. Point the remote at the device, and push the power button once. 4. The light will begin to flash, every 2-3 seconds, as it tries each code. 5. When the device shuts off, immediately push the button, you pushed to select your device. 6. The light should now go out...and the remote is programmed, for that function. 7. Other devices may be done, by using the same procedure...using the different device buttons.

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

What kind of system are you trying to use it on??

Posted on Apr 29, 2009

  • menestrom Apr 29, 2009

    The codes for a Philips TV are:

    004, 005, 029, 030, 072, 073, 078, 080, 087, 118, 153



    Hope that helps! :)

  • Jackie Benoit
    Jackie Benoit May 16, 2014

    a smart universal jumbo tde remote with out code search button don't program like it said above the tv just goes off light remains lit what to do now

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found my owners manual for the TDE Systems 8-in-1 Jumbo Universal Remote Item #33201048... The jumbo remote WITHOUT THE CODE SEARCH BUTTON (a Mute button is located at the top left).
It says to "Aim the remote at the device and PRESS AND HOLD the corresponding Device Button. After three seconds the LED indicator will illuminate and stay on. Release the Device Button. Input the first four-digit code in the list of codes."
So instead of a Code search button, just press and hold the TV button, or whatever you are programming, for about 3 secs, then enter the code.

Posted on Jul 12, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Tde jumbo remote weeds the code search button and codes for a Hitachi tv

Posted on Oct 29, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Need codes for Sylvania TV

Posted on Apr 05, 2011

  • ljc73 Jul 10, 2011

    i newd code for the jumbo tds systems universal remote lost the manual all i need is code or codes for toshiba theaterwide hd tv

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Manually change TV analog to digital


You should have a remote control to set this setting. Manual controls won't go. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Jan 10, 2017 | Televison & Video

1 Answer

I want to know the code for a seiki television for a illumibeam jumbo universal remote


An applicable code would be in the remote. If code search doesn't work, you may have to try a different universal remote. All universal remotes do not contain all possible codes.

Jan 09, 2017 | Universal Televison & Video

1 Answer

I needreplacement remote control for DVD-R1300


If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electro-medical.blogspot.com/

Jan 09, 2017 | Televison & Video

1 Answer

Can you operate model ZHS 30A without a remote. Mine has been damaged and waiting for a new one.


Without a remote control, either you or me can't operate it. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Jan 09, 2017 | Televison & Video

1 Answer

One for all universal remote I need the code to program my seiki tv


here you go


Product Support For One for All Remotes.

Q: I'm trying to set up my cable/satellite/universal remote to work with your television. What is the manufacturer's code for my SEIKI TV?
A: Cable and Satellite content providers control the remote codes, and we apologize for any confusion during the remote programming. Please try the following codes:
DIRECTV - 10178 11687, 10178, 10835, 10056, 10150, 10463, 10156, 11498, 11401, 0178,
Time Warner Cable - 0178
Philips - 0002
Comcast - 11864, 10178, 0060
Cox Communications - 0178
Atlas DVR Device URC - 0178
Bell Remotes & Dish Network - 505, 506, 516, 523, 526, 566, 573, 612, 627, 647, 652, 653, 654, 655, 656, 658, 659, 664, 665, 667, 669, 670, 679, 680, 704, 717, 730, 738
ATT U-verse - 1004
Hitachi - 0002
URC- 2964, 0145
Cablevision customer (optimum)- 004
Bose or universal remotes- LG remote code
Universal Remote - One For All OARC04G 4 Device Universal Remote (Element code)
These codes may not work on some universal remotes. If there is another code listed for SEIKI Digital in your universal remote control guide, please try that code. Refer to the Remote Control Guide under your TV's model number for more information.

Jan 09, 2017 | One For All Televison & Video

1 Answer

Hello, The Original remote quit working, So I bought a RCA universal remote control RCR314WZ. I need the code for (DTA800B1 B1L) converter box. so the remote will control it


Some RCA universal remotes list STB codes but you can try using code search to find something that can handle some or all functions. If a search through all codes contained in the remote does not succeed, you may have to try a different universal remote. All universal remotes do not contain all possible codes.

Jan 07, 2017 | RCA Televison & Video

1 Answer

I am looking for a universal control for the LG DVD player BP125, and vizio m420nv


If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electro-medical.blogspot.com/

Jan 07, 2017 | LG Televison & Video

1 Answer

We have a jvc RM -C3400 tv which my kids key locked. My remote is broken is there any way I can unlock without a remote? If so how. Thanks


Without a remote control, you can't unlock it by using the front panel controls. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

Jan 06, 2017 | JVC Televison & Video

1 Answer

Where can I purchase a replacement remote for my 2004 ESA DVD player?


If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops.

Dec 20, 2014 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

8,212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Universal Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71672 Answers

JOHN TOPLISS

Level 2 Expert

135 Answers

Cindy Wells

Level 3 Expert

4885 Answers

Are you an Universal Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...