Question about Maytag PYE2300AY Electric Dryer

1 Answer

Pye2300ayw Dryer will not start. I think it is a bad door switch. How can a confirm this?

Posted by on

  • 1 more comment 
  • jamboree01 Mar 07, 2009

    I also have a maytag performa pye2300ayw that wont start. Doesnt turn on at all. When I push in the knob to start, nothing happens. If this is the thermal fuse, is it something I can do myself?

  • shews01 Mar 10, 2009

    I have a Maytag PYE2300AY electric dryer and lately it has also been stopping in the middle of cycle. However, it will restart after setting (cooling??) for a period of time.

  • 9188 May 11, 2009

    The timer on my Maytag clicks, but no spinning or heat. Do I need part 3344 (fuse) and, if so, is the fuse located inside the silver metal disk (2-in in diameter) that surround the electrical controls in the back? The fuse doesn't correspond to anything I see on this panel.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points
    All-Star:

    An expert that got 10 achievements.
    MVP:

    An expert that got 5 achievements.
    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 686 Answers

Change your thermal fuse first. when thermal fuse goes bad either the whole dryer won't run or the heat element won't come on. Check out item # 3344 at www.repairclinic.com/Appliance-Parts?s=t-pye2300ayw-%3d%3d&z=100 If your thermal fuse is bad there will be no continuity through it.

Posted on Mar 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

6ya.com

Download 6ya

6ya.com

Need repair answers fast Use 6ya to...

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont start when button is pushed
could be a bad door switch, wen door switch goes bad it wont start the dryer thinks the door is still open.

Dec 17, 2012 | GE GTDP300EMWS Dryer

1 Answer

WHY MY MAYTAG DRYER PYE2300AYW WON'T START
Test the thermal fuse on the side of the heater housing. It should read closed for continuity. If open, you will need to replace the kit. Here is a link to the kit you need.

Oct 30, 2012 | Maytag Pye2300ayw Dryer Door Switch...

1 Answer

I have a kenmore he2 gas dryer,it wont turn on all as it does is beep and also when the door is closed the light still stays on,im thinking it is the door switch ,but want to confirm this first


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor going bad...

Here are a couple of tips that I wrote will help you to figure out why your dryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101


May 02, 2011 | Dryers

1 Answer

My dryer won't do anything. Maytag model PYE2300AYW REV 10, Serial 10604533ZU
First thing check the circuit breaker to see if it is tripped or if it is a fuse style if the fuse is blown. Next if that all checks out okay check the door switch and see tha the door switch is being made when the door is closed. The machine will not operate with the door open and if the switch is bad or stuck open then the machine will not work.

Jan 18, 2010 | Dryers

1 Answer

Maytag Dryer model number PYE2300AYW will not start.
check your fuses in the dryer their is only one fuse that could shut down the whole dryer like that. Open back panel and get a volt meter and check for continuity on the fuses. HOW? first un plug it then open back then you will see the heating element their are 2 fuses on the heating element take off wires and check those.Then if those are ok look down thier is another fuses its long white with 2 wires comming out of it with a black center that should be your problem check it repair it run it . GOOD LUCK

Oct 12, 2009 | Maytag Dryers

1 Answer

Maytag pye2300ayw runs but does not heat.
hi..the reason to this problem is your heating
element might have gone bad.
check it out..
thank u..
kindly rate my response..

Jun 30, 2009 | Whirlpool LER5636P Electric Dryer

2 Answers

My maytag performa pye2300ayw dryer will start but will not heat up. No matter how long I leave it on, it just won't heat up. what could be the source of the problem? the model number - pye2300ayw rev - 10...
You have a thermal overload switch that may be bad. It is located under the top of the dryer. Check first the breakers. Turn them off and then back on, then check the wiring in the back of the dryer and then the element itself. It may take 30 minutes to do all of this, but it will save you a lot in the long run.

Mar 04, 2009 | Maytag Dryers

2 Answers

How to remove lint tray receiver: maytag dryer model#pye2300ayw
Unplug first with a straight blade screwdriver, pry up on the top of the dryer where the front wall of the dryer and the top meet. there are 2 screws 1 on each side inside the dryer where the sides and front meet, remove them and unhook the wires from the door switch. the whole front will now pull out and up, now open the door remove the 2 screws at the bottom of the door opening and the whole lint tray will pull out. sounds like a lot but only takes about 5 minutes.

Nov 30, 2008 | Maytag PYE2300AY Electric Dryer

1 Answer

Problem With Maytag Dryer(PYE2300AYW)
you check the igninter on the burner . does it glow red when started then go off . or nothing at all . it has to glow red for any gas to come out to start the heat to dry your clothes .???

Jul 31, 2008 | Dryers

1 Answer

Maytag PYE2300AYW starts when I hold the button in, but will not stay started.
The motor will need to be replaced. There is a throw-out switch on the motor that keeps it running after you release the start button. These are generally easy to change, with the only hard part being taking the cover off and putting it back on. http://www.partstore.com/GetModel.aspx?MfgName=Maytag&BrandName=Maytag&ModelNumber=PYE2300ayw&PartCategoryName=&Keywords=motor Any of these motors listed will fit your unit.

Sep 17, 2007 | Maytag PYE2300AY Electric Dryer

Not finding what you are looking for?

View Most Popular

PYE2300AY Electric Dryer

  • Dryers

Related Question

Wont start when button is pushed

  • GE GTDP300EMWS Dryer

Open Questions:

0 Answers

maytag performa electric dryer will not start

Jul 12, 2014 | Maytag PYE2300AY Electric Dryer

0 Answers

maytag legacy series electric dryer won't start model #med5770tq0

Jul 08, 2014 | Maytag PYE2300AY Electric Dryer

0 Answers

Whirlpool coin op timer CEM2743DQ

Jul 03, 2014 | Maytag PYE2300AY Electric Dryer

0 Answers

maytag model MED9700

Jun 29, 2014 | Maytag PYE2300AY Electric Dryer

See all Maytag PYE2300AY Electric Dryer Questions

Related Topics

Maytag PYE2300AY Electric Dryer Logo

Related Topics:

1,224 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

Maytag PYE2300AY Electric Dryer

Maytag PYE2300AY Electric Dryer

Maytag 7.0 Cu. Ft. Electric...

Maytag MDE2600 Electric Dryer

Maytag Atlantis MDE7400AY...

Top Maytag Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Tim Whalen

Level 3 Expert

3072 Answers

yadayada
yadayada

Level 3 Expert

71231 Answers

Are you a Maytag Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...