Question about Bowflex Treadclimber

1 Answer

E2-C error code

Just purchased this used TC5000 and am getting this error code and the machine shuts down. Can you help?

Posted by on

  • 1 more comment 
  • mrliken Mar 03, 2009

    What I didn't put, is that this code comes on after 5-10 minutes of operation. I had performed the input and stepped like I have never stepped before.

  • Anonymous Mar 18, 2009

    I don't have the manual anymore,but have the same problem. E2-C and machine shuts down after a few mintues...Anyone want to Help meeeeeeeeeeeee lol Thanks,D (LI New York)

  • overonlemon Apr 04, 2009

    My TC5000 stops intermittently as well. I start my workout, then for no apparent reason, the unit stops. I start it up again and it runs and then randomly stops for no reason. HELP!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 90 Answers

You must be steping on the machine for the generator to allow you to set its functions , keep steping until you have entered in your requirements and weight and workout that you would like to have ,this will allow your programming also to be saved ,also see if you have battery backups on this model ,they can be dead ! , hope this helps thanks glenn

Posted on Mar 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung dishwasher dms500trw. what does error code f3 mean. i just replaced the hose after e2 code now 2 weeks later i have f3 code?


Samsung DMS500TRW - ProductReview.com.au

www.productreview.com.au > ... > Dishwashers > Freestanding > Samsung

Rating: 2.4 - ‎49 votes
2.4 out of 5 stars for Samsung DMS500TRW in Freestanding Dishwashers (page 2). ... The machine gives an E2 error and will not pump water out. I have to manually cup it out. ... F3 Error. 1 out of 5, reviewed on Sep 30, 2013. Purchased dishwasher in Jan 2012. First broke ... F3 what dose this code mean? Dell asked on ...

Nov 26, 2015 | Dishwashers

1 Answer

Godrej eon washing machine e2 problem.


eco wash fault this can be down to hard water areas, the switch for the water intake is stuck can be opening but not all the way so it shuts it back off and you get this code.

May 09, 2014 | Washing Machines

1 Answer

E2, E3, E4 CODES ON A SEARS LIFESTYLER EXPOSURE 1500 MACHINE STARTS OK BUT SHUTS DOWN W/ E CODES AFTER A FEW MINUTES.


an E2 is a speed error code and the others all just tell me you have a friction problem-elevate the incline up all the way,without mtr working,push yourself off backwards-did you use muscles in arms/lower back? was it diffacult? thats friction,like rubbing hands together for long time. Result, no lube under walking belt- replace mtr,controller,walking belt- cost- a new treadmill

Jan 07, 2010 | Exercise & Fitness

1 Answer

Error code E2


Error Code E2 means the pump is blocked. The remedy is to take the filter out which is underneath the bottom dish basket and ensure its is clean and free from debris. Then use a small container to empty the water sitting in the bottom of the machine/filter housing and ensure that no waste is stuck in the bottom. That should clear it

May 24, 2009 | Baumatic 23 in. BDW13 Built-in Dishwasher

2 Answers

Bosch Washing MAchine - E2 error message


Hi.

E2 means uneven balance.

The error code gets reset using the following procedure:

Ensure that the machine door is closed. Turn the dial in the OFF position.
Hold down Start/Pause button and turn the dial anti clockwise at the same time until its position is pointing at the Express (15mins) program.
Hold down Start/Pause button until the e2 message starts flashing (or keep holding for about one minute)
Release the button.
Turn the dial again to the OFF position.
The machine is reset. Select any program.

If the message comes back after selecting program, then there is still a balancing problem. Remove and redistribute load, check floor and ensure machine is at level.

Jan 31, 2009 | Bosch WFMC 3200 Front Load Washer

1 Answer

Power cuts off


The machine beeps E2 all the time. Actually E2 error code means washer door is not closed properly. However washer door does close properly, but the machine still beeps with showing E2 error code. Please help solve this problem.

Many thanks,

Robert

Jul 04, 2008 | Haier XQB60-91AF Top Load Washer

Not finding what you are looking for?
Bowflex Treadclimber Logo

1,042 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bowflex Exercise & Fitness Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Bowflex Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...