Question about NetGear WGR614 Wireless Router
Followed instruction cd when removed wire from computer and router cannot access internet
It does sound like you may need to upgrade firmware. Not sure what OS you are running as Netgear is still in the process of updating Vista firmware. Anyway here is the URL you need:
You might like to try:
1. Disable Windows Firewall
2. In Internet Options Control Panel go to the connection tab and then the LAN Settings where you can uncheck the "Automatically detect settings" button.
3. If you have any third party software, I would get rid of this and ensure that the"Windows Zero Configuration" in the Services menu is set to "Automatic" and the status is started.
Interestingly, Anti Virus programs sometimes interfere with wireless set up - you could see if it helps by disabling it whilst configuring your wireless. It might also be worth trying to connect without any encryption code & see if that will connect - you can then sort out the encryption.
You might find this site of some use
Posted on Mar 02, 2009
Tips for a great answer:
Dec 29, 2012 | Belkin Surf N300 Wireless Router...
Feb 23, 2011 | NetGear WGT624 Wireless Router
NOTE: The image may vary depending on the computer and modem you're using.
Once an active Internet connection is established through the modem, connect the modem and the computer to the router by following the instructions below.
Connecting the Devices Together
After ensuring that you have an active Internet connection, connect the modem to the router's Internet port and the computer to any of the four Ethernet ports. For instructions, click here.
After connecting the devices, check the LEDs by following the instructions below.
Checking the Router's LEDs
The Linksys router's front panel will indicate the status of the connection. After connecting the broadband modem to the WAN or Internet port, the computer to an available numbered port and powering on the router check the lights on the front panel of the router. For instructions, click here.
After checking the router's LEDs, configure the router for cable Internet. For instructions, follow the steps below.
Configuring a Linksys Router for a Cable Connection
For Telstra Cable internet users, please contact Telstra to confirm if your internet connection is using DHCP or HB (Heart Beat) signal. There should be no other machine running HB client upon doing this procedure.
Access the router's web-based setup page. For instructions, click here.
NOTE: If you are using Mac to access the router's web-based setup page, click here. If you forgot your IP address, click here. If you forgot your router's password, click here.
When the router's web-based setup page appears, click the drop-down arrow under the Internet Connection Type field and select Automatic Configuration - DHCP.
(a) If you are NOT using Telstra HB, proceed with DHCP setup.
NOTE: If you are a Telstra Cable internet user and you're using WRT120N, WRT160N v1, WRT320N or WRT610N, please select Telstra Cable.
(b) If you are using Telstra Cable, proceed with the following setup. Obtain your user name and password from Telstra. Please disable any HB client that might have been previously running on the PC after the router is configured.
Click MAC Address Clone.
Select Enabled and click Clone My PC's MAC.
Click Status. Check the value of the Internet IP Address. If the Internet IP Address has numbers, this means the router has been properly configured. You should now be able to access the Internet. If you're not online, perform a power cycle to synchronize the router with the modem. For instructions, click here.
NOTE: If the Internet IP Address is all zeroes (0.0.0.0) click first then click . If the Internet IP Address is still all zeroes (0.0.0.0) perform a power cycle. For instructions, click here.
If the IP Address starts with 192.168.1.xxx or if it has the same first three numbers (octets) as the router's IP address, change the router's LAN IP address to a different LAN segment. For instructions, click here.
Once the router is configured, perform a power cycle. For instructions, follow the steps below.
Shutdown the computer.
Unplug the router's power cable.
Unplug the Broadband modem's power cable and wait for 30 seconds.
Plug in the Broadband modem's power cable and wait for its lights to appear stable.
Plug in the router's power cable once the modem's lights appear stable.
Power on the computer on and test the Internet connection.
NOTE: If you're not online after performing this procedure, you may need to upgrade the firmware of the router.
Sep 28, 2010 | Linksys Wireless-G WRT54G Router
Aug 01, 2010 | Routers
Jun 10, 2010 | Cisco Linksys E1000 WirelessN Broadband...
Jan 21, 2010 | Linksys Wireless-G WRT54G Router
Aug 12, 2008 | Linksys WRT54GL Wireless-G 54Mbps...
Jul 18, 2008 | Belkin (F5D7230-4) Router (587009)
Dec 15, 2007 | Belkin F5D7230-4 Kit (F5D7230V4SNPDQ)
Feb 16, 2006 | Linksys EtherFast Cable/DSL Router
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: