I have an older LANC control that has no internal power. The older video cameras always sent voltage out of the lanc jack and powered my controller. The new camera, when it enters sleep mode, stops sending out the voltage and my control will not wake it up. Is there some type of inline capacitor or something that will fix this problem?
The tape transport came up but now the unit will not "lock" the door to allow it to...
(More)
The tape transport came up but now the unit will not "lock" the door to allow it to retract. Everthing has worked fine in the past. I have NOT pushed the transport mechanism down as they warn you not to but because the pop open door will not stay closed there is no way for it to automatically lower as it is supposed to.
My HC7 started to roll on the flip out screen. I now can't use the touch screen or if I do get the...
(More)
My HC7 started to roll on the flip out screen. I now can't use the touch screen or if I do get the touch screen to function I can't see, due to the roll, where or what the touch panel is showing.
HDR-HC7 - After about 20-30 minutes of recording picture begins distorting with slight vertical...
(More)
HDR-HC7 - After about 20-30 minutes of recording picture begins distorting with slight vertical jitter. Can be seen in viewfinder and records on tape. Usually turning camcorder completely off foe a few minutes and turning back on clears up for another 10 to 20 mins then repeats.