Question about NetGear WGR614 Wireless Router

1 Answer

Netgear WGR614 v6 I would like to host Nascar races & need to open TCP Port 8590 to allow this to happen . Can anyone help me ? Thanks Lenny

Posted by on

  • Leonard Lavoie Mar 02, 2009

    Carl... thanks for the help ...it worked awsome !

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,460 Answers

You need about 3 pieces of information to make this work; the machine that's going to serve's IP address, the password to your router, and a machine on the network.

You can let the serving machine obtain an IP address automatically, but if it changes you will have to reset your server IP address all the time. So, for fun, give it an address in your IP range, generally 192.168.1.x. Pick a number like maybe 250. Then, log into your Netgear (192.168.1.1) and use admin and the password to get to the router web page. On the left tab, go to port forwarding, create a new custom service, and put in 8590 and the IP address of the server.

Once you apply it, it will show up in the table and you'll see what port, a name, and the internal IP address 8590 goes to.

Carl

Posted on Mar 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i reset my pass word


  1. Push the "Default Reset" button on the back of the Netgear WGR614-V6. The button is located on the back of the unit, to the left of the external antenna. You may need to use a pin or the tip of a pencil to access the button.

  2. 2

    Continue holding the button in until you see the "Power" indicator on the front of the unit turn off and back on. This takes approximately ten seconds.

  3. 3

    Let go of the button. The Netgear WGR614-V6 shuts off and turns back on. Allow several seconds for this process to complete.

  4. 4

    Log into the router using the default password by opening a Web browser and navigating to the address "192.168.1.1." Enter the password "password" to log in.



Read more: How to Reset the Password for Netgear WGR614-V6 ' eHow.com http://www.ehow.com/how_6500350_reset-password-netgear-wgr614_v6.html#ixzz199K9aGLg

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe

Dec 25, 2010 | NetGear WGR614 Wireless Router

1 Answer

Their is a code that i dont remember and i dont know how to get it


Reset the router:


  1. Push the "Default Reset" button on the back of the Netgear WGR614-V6. The button is located on the back of the unit, to the left of the external antenna. You may need to use a pin or the tip of a pencil to access the button.

  2. 2

    Continue holding the button in until you see the "Power" indicator on the front of the unit turn off and back on. This takes approximately ten seconds.

  3. 3

    Let go of the button. The Netgear WGR614-V6 shuts off and turns back on. Allow several seconds for this process to complete.

  4. 4

    Log into the router using the default password by opening a Web browser and navigating to the address "192.168.1.1." Enter the password "password" to log in.



Read more: How to Reset the Password for Netgear WGR614-V6 ' eHow.com http://www.ehow.com/how_6500350_reset-password-netgear-wgr614_v6.html#ixzz16oThLs5P

Nov 30, 2010 | NetGear WGR614 Wireless Router

1 Answer

I need to know my wireless password. I did try the default password, which is password but it did not work. I need the password to initialize my new ereader and tablet. The netgear serial number is...


  • If you can log onto the router @ 192.168.1.1 with the user name:admin- password: password

  • then you can go to the Wireless tab, then security. There you will see you key.

  • If not you need to reset the router:


  • Push the "Default Reset" button on the back of the Netgear WGR614-V6. The button is located on the back of the unit, to the left of the external antenna. You may need to use a pin or the tip of a pencil to access the button.

  • 2

    Continue holding the button in until you see the "Power" indicator on the front of the unit turn off and back on. This takes approximately ten seconds.

  • 3

    Let go of the button. The Netgear WGR614-V6 shuts off and turns back on. Allow several seconds for this process to complete.

  • 4

    Log into the router using the default password by opening a Web browser and navigating to the address "192.168.1.1." Enter the password "password" to log in.



  • Read more: How to Reset the Password for Netgear WGR614-V6 ' eHow.com http://www.ehow.com/how_6500350_reset-password-netgear-wgr614_v6.html#ixzz15Vaa7ANz

    Click on this link or copy and paste the complete link into your browser.

    If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response.

    Thanks, Joe

    Nov 17, 2010 | NetGear WGR614 Wireless Router

    1 Answer

    How do I change the NAT type on my Netgear WGR614 v6 router from strict to open?


    You need to configure your router.
    For that Connect your router to computer with ethernet cable then you can access it with following default link.
    http://192.168.0.1
    or
    http://192.168.1.1
    If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
    Then it ask for user name and password.
    Type user as "admin" and password as "admin" or "password" or blank.
    Then you can see configuration page of router.
    Then click on NAT and then port forwarding then open port tcp and udp which you want then save settings and restart router.
    Let me know if you need further assistance.
    Thanks for using FixYa.

    Apr 19, 2010 | NetGear WGR614 Wireless Router

    1 Answer

    How to set my xbox360s NAT to OPEN Witha netgear WGR614v7 Router?


    Basically you have to open the application port of XBOX on your router. To do that you have to access the router's GUI and forward the ports. To access the router go to http://192.168.1.1 username is admin and password is password by default, click the port forwarding tab and open this ports
  • TCP 80
  • UDP 88
  • UDP 3074
  • TCP 3074
  • UDP 53
  • TCP 53

  • Click add customer service and type xbox for service name and the IP address of the xbox.

    Jun 30, 2009 | NetGear WGR614 54 Mbps Wireless Router -...

    1 Answer

    Would like to host a game thru my motorola modem/router


    You need to look for something on your router called Static NAT and configure it to point to your internal IP address.  You also need to find out what ports your NASCAR game advertises itself on...it's usually high ports (20000-30000).  ONce you find out the port(s), you can create a custom service on your router for those ports, and when you configure Static NAT, it should ask what 'service' you want to advertise.  This basically tells the router to forward all inbound traffic, looking for those particular ports, directly to your IP address, which will allow users on the Internet to see your game server. 
    Cheers!

    Apr 18, 2009 | Arris WR850G Router (DHWR850G)

    1 Answer

    Port setting to allow my xbox to run games


    Hello djand2kidz,


    Inorder to resolve this we need to open application ports for the Xboxconnection. This problem can be resolve by any of the following:

    1. Opening port Numbers TCP 88, TCP/UDP 3074
    2. Lowering MTU size and Disabling SPI
    3. Enabling UPnP
    4. Enabling DMZ
    5. Upgrading the firmware of the router.
    6. Set NAT filtering to open (Only available on WGR614v6, v7, and v8)
    Here are theoptions on how your Xbox connected to the internet. Opening Port Numbers TCP 88, TCP/UDP 3074:
    1. Make sure that Xbox has valid IPaddress of the same range of the Netgear router.
    2.
    Assign static IP address on Xbox.The following values should be used while assigning static IP address on theXbox.

    IP Address: 192.168.1.x (e.g. 192.168.1.200)
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1

    Note: Here ‘x’ can be any uniquenumber from 2 to 254 depending upon the IP address assigned to remainingcomputers in your network.

    3. Oncestatic IP address is assigned, the requisite port numbers can be open using thesteps below.

    a. Open the browser(Internet Explorer or Netscape) and type the IP address of the Router(192.168.1.1) in the address bar.
    b. It will prompt youto Login into the Router (Username = “admin” & Password = “password”).
    c. Select "Port Forwarding" under "Advance"
    d. Select "Port Forwading" under "Service Type"
    e. Click on "Add Custom Service"
    f. Prepare the following Service for opening port 88 TCP/UDP.
    g. Clcik on "APPLY" after creating Xbox_1
    h. Again click on ‘Add Custom service and thenenter the values to open port number TCP/UDP 3074.
    i. Click on ‘Apply’ after creating Service Xbox_2.
    j. OnceXbox_1 and Xbox_2 services are created you will there entries under ‘PortForwarding/Port Triggering Option.






    Mar 29, 2009 | NetGear WGR614 Wireless Router

    1 Answer

    Belkin 54 g wireless router....cant find on the net. need to port forward to host blizzard.net games HELP!


    Make sure your private IP address is statically set.  Your public IP address is obtained from your ISP and is what other users will be connecting to.  You can not manipulate your public IP address so if your ISP is running DHCP, it is very possible that your public address is changing.  Also if you are frequently disconnecting your modem, it is possible your ISP is leasing you a new public IP address each time.  So try to keep things as static as possible.  As far as the battle net stuff.

    Diablo, Warcraft II Battle.net Edition, and StarCraft: 
    Allow port 6112-6119 TCP and UDP out and in
    Diablo II: 
    Allow port 6112 TCP out and allow established sessions in 
    Allow port 4000 TCP out (realm games) 
    Allow port 4000 TCP out and in (hosting open games only) 
    Warcraft III: 
    Allow port 6112 TCP out and allow established sessions in 
    Allow port 6112 TCP in (hosting custom games) 
    Allow port 6113-6119 TCP out and in (hosting custom games if you've changed the default port in the Options/Gameplay screen) 
    If you are still having problems after you open up the required ports, try opening 116(TCP) and 118(TCP). I don't really know if these ports are required or not. 
    I have had people tell me that opening up those two ports have helped them connect to battle.net.


    Hope that helps.  For manipulating ports in your router I suggest consulting your user manual, or online FAQ.  Save your router config before applying any changes, and always remember, opening up ports subjects you to different types of security threats so be aware that is a risk you are taking.

    Mar 12, 2009 | Belkin Routers

    1 Answer

    Nat ports


    Go to the port range forwarding page on your router's setup.
    It will ask you for the specific port. (88,3074) Enter them in in their own seperate sections. Then select either UDP of TCP for each. Then save the settings and you should be good to go.

    Apr 06, 2008 | NetGear WGR614 Router

    1 Answer

    NAT set to strict


    upgrade your router to the latest firmware that can be found here:
    http://kbserver.netgear.com/products/WGR614.asp

    after upgrading the firmware, press the reset button for 30 seconds, then reconfigure the router. you will need to re-enable upnp if it is disabled, and open up ports UDP 88 UDP 3074 TCP 3074. i would also reserve the ip for the xbox and if all else fails set the xbox as the dmz host.

    hope this helps,
    trin

    Nov 16, 2007 | NetGear WGR614 Wireless Router

    Not finding what you are looking for?
    NetGear WGR614 Wireless Router Logo

    Related Topics:

    85 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top NetGear Routers Experts

    Barry37

    Level 1 Expert

    31 Answers

    MrNutsy

    Level 1 Expert

    36 Answers

    Phillip Whisenant
    Phillip Whisenant

    Level 2 Expert

    120 Answers

    Are you a NetGear Router Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...