Question about ICOM Informatique M-88 VHF Marine (22 Channels) 2-Way Radio

Open Question

Tedelex TE-3000 channel programming

I want to "activate" all 23 channels on an TEDELEX TE-3000 radio - I've done the cutting of the diodes as indicated on the frequency chart
Must the corresponding diode in row 12 also be cut ??? The chanels that was "active" when I get hold of this radio the corresponding diodes in row 12 is also cut

Posted by on

  • 1 more comment 
  • Anonymous Mar 24, 2009

    I also have the same problem. i also don't have any cutting chart. please send me copy to zr5aec@yahoo.com.

    Thanks

    Commex

  • Anonymous May 06, 2009

    need a frequency chart for tedelex te 3000

  • Anonymous May 07, 2009

    I need to open all chanels on Tedelex TE 3000 , have no diode cutting/frequency list or how it is done , can you help me ?

×

2 Suggested Answers

  • 3 Answers

SOURCE: Programming an ICOM F4S

Hi....

if you go to the FCC website and look up the FRS/GMRS info you will find a listing to links that can show you the frequiences for the two radio services...or you can look up Midland model GXT900/950 /series radios and in their specifications gives a frequency chart. the link is WWW.midlandradio.com

Posted on Mar 17, 2009

BillB-SA
  • 2761 Answers

SOURCE: how to add frequencies/channels to ICOM IC-F21

Sorry, but your radio is limited to 16 channels in the 400-430 and 440-470 MHz ranges. The number of channels cannot be expanded, nor can the frequency coverage.

Bill B

Posted on Mar 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have tedelex EC2159 remote codes it should be 3 digits not 4


Pilot remote control codes for TEDELEX:
30 results. Displaying page 1 of 1
NR Brand Model Type Pilot Supertel* Easytel Unitel 1 TEDELEX 1452 R/C P1679Y 2 TEDELEX 1452 TV P1679Y 3 TEDELEX 1455 TV P1655Y 4 TEDELEX 1458 TV P1655Y 5 TEDELEX 1459 TV P1655Y 6 TEDELEX 2052 TV P1679Y 7 TEDELEX 2056 TV P1690N 8 TEDELEX 2092 TV P1679Y 9 TEDELEX 2096 TV P1690N 10 TEDELEX 2098 TV P1655Y 11 TEDELEX 2099 TV P1655Y 12 TEDELEX 2122 TV P1545Y 13 TEDELEX 9227 TV P1690N 14 TEDELEX 9422 TV P1655Y 15 TEDELEX 9427 TV P1655Y 16 TEDELEX 9628 TV P4263 17 TEDELEX EC 2528 TV P4190N 18 TEDELEX EC 2909 TV P4264 19 TEDELEX G 148 TV P4263 20 TEDELEX G 149 TV P4263 21 TEDELEX G 202 TV P4263 22 TEDELEX G 209 TV P4263 23 TEDELEX N 9034 SA VCR P1814 24 TEDELEX RC 94 R/C P1655Y 25 TEDELEX RC 97-PI TV P4263 26 TEDELEX RC 98A R/C P4190N 27 TEDELEX RC 98D TV P4264 28 TEDELEX SOME MODELS VCR 29 TEDELEX SOME MODELS VCR P4205N 30 TEDELEX STUDIO 3000 G TV P1690N
* Note: Supertel, Minitel and PRO-TEL universal remote controls will share the same code.

Feb 26, 2017 | Televison & Video

1 Answer

Tedelex ec275. Why doesn't it store the channels even after programming the eeprom?


Check and replace its tuner. Check the AGC and AFT voltage of the tuner. If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/

Apr 11, 2016 | Televison & Video

1 Answer

I hav a tedelex 50 inch plasma with no remote, I've tried auto search but it only scans 1 channel , how do i scan all channels?


Maybe you should check user's manual? Don't have one? provide Make and model migth find one

May 06, 2015 | Televison & Video

1 Answer

How to connect TEDELEX video output


You'll need the correct video lead for this job.
Check what kind of connectors are needed - usually phono and video will be 'yellow' whereas stereo audio is 'white' for left channel and 'red' for right channel.

Jan 09, 2014 | Audio Players & Recorders

1 Answer

CHannel stays on 9 and won't go up.


This sounds like a problem with the diode matrix which pre-programs channel 9 on the PLL code signals. Probably the "channel 9" switch that activates these diodes is bad, so that the diodes are activated all the time preventing the channel switch to do its work. You will need a schematic diagram and a voltmeter to check the logic signals in this circuit. Start witht he switch; does the switch voltage change when you toggle the switch? If not; switch is bad. If it does, the problem must be "farther downstream" with the diodes itself.

Jul 22, 2010 | Cobra 29 WX NW ST 40-Channels Base CB...

2 Answers

Cable channels wont program above 27 w my basic cable


Hi classmom2,
I will be happy to help.
You have probably tried this but I will go over it anyway. If it dosn't work we will try something else.
From the video menu on the tv, select the tuning band of CABLE not AIR. Then do a Auto-Channel Search.
From what I gather you have basic cable without a cable box correct?
Let me know what you find and we will go from there.
Lone99star

Jan 24, 2009 | Sharp LC-26D7U 26 in. HDTV LCD Television

1 Answer

MAKE TEDELEX 118A REGION FREE


As I was not getting any feedback on my problem I purchased a Region 1 DVD from the U.S.A. to see if it would play the DVD. The Tedelex 118A must be a region free DVD PLAYER as it has PAL/NTSC functions and AUTO to change to what ever region is playing.Where the Tedelex 118 needs a code to change to all regions

Jan 11, 2009 | Televison & Video

Not finding what you are looking for?
ICOM Informatique M-88 VHF Marine (22 Channels) 2-Way Radio Logo

Related Topics:

587 people viewed this question

Ask a Question

Usually answered in minutes!

Top ICOM Informatique Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1641 Answers

barney2xbass

Level 1 Expert

9 Answers

Are you an ICOM Informatique Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...