Question about HP LaserJet 1020 Printer

1 Answer

I cant print without paper

What do i do?

Posted by on

  • Anonymous Mar 03, 2009

    i cant
    i have no hands

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 25 Answers

Print to file or email or get some paper...

Posted on Mar 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Both paper jam and ink replacement lights are flashing.


Sounds like print cartridge collided with paper. Open both covers. Try to remove paper carefully without damaging print cartridge. you may need to remove print cartridges to get paper out. Then close every thing without print cartridge in. Reopen covers reinstall print cartridge/s, hopefully, everything returns to normal. It will probably say something about going through the process of realignment.

Mar 13, 2015 | Printers & Copiers

1 Answer

Epson C86: paper not feeding and prints at an angle


try feeding the paper through manually if you cant do this then try printing a blank page and see if this still wrecks the paper if it does then it does sound like something is jammed on the roller the best way to clean this is with a blast of air from a compressor this is the only sollution as it will cost more to replace the parts than it would to buy another printer if it is still under warranty they should replace it for you if not you could take it to a computer repair shop where they will strip it down adn rebuild it for you this is a paper feed problem but im sure their must be somethig sticking in the way or maybe the paper feed has come lose at the one end sorry i couldnt help you any more ........................................

Oct 31, 2007 | Epson Stylus C86 InkJet Printer

1 Answer

My canon MP287 cant print.black when photocopy. The paper also started to jam so it cant print. what will I do?


When there is a paper jamb make sure the whole piece of paper is removed because any tiny pieces of paper that are left behind will cause further paper jambs.
If the paper does not feed through the printer correctly then the rubber rollers are dirty/sticky. Clean the rollers with methylated spirits to stop the paper from sticking to the rollers.

Mar 02, 2013 | Printers & Copiers

1 Answer

Dcp 115 is showing "Paper


This seems to be fault in the transport of the paper in the rollers. So if you have used any adhesive sticker printing, it is possible that some glue has got clogged into the rollers. If not there can be some jammed paper in the rollers or the mechanism.
So start this work only if you are mechanically able with the right tools.
Remove the covers to get access to the mechanism . Remove the motor drive assembly , the fitting of the motor to the mechanism. Once this is removed the rollers can be turned manually so that you will be able to feed a paper to see the progress of the movement while studying if there is any obstruction or damage to the paper.
There is a in-detect sensor, usually an opto-coupler , make sure this is not clogged or dirty as this IR detection feeds the signal to the processor for starting the motor drive feed.
Reassemble but make sure the rollers are aligned to be in equal gap to feed the paper without a side pull. Now you must print and see if the fault has changed. If not repeat the above work to confirm the area of obstruction.

Please also check this link for tips:

http://www.ehow.com/how_113761_clear-printer-paper.html

Jul 22, 2011 | Brother DCP 115C All-In-One InkJet Printer

1 Answer

Kodak 6850 how do I print 4x6 on 6x8 paper without huge white border... now that you cant buy 4x6 media ?r


the 6'' paper is not the problem at all, you might need to crop the image to 4x6 size before printing since most point and shoot camera will not take the photo 4x6 size but 4+ inches, thus the border. richard

Nov 22, 2010 | Kodak Photo Printer 6850 Thermal

1 Answer

Pagr pro 9100 and Mac OSx 10.5.1


I am not clear with the quarry you ask but what I understand that you can print larger the A4.so in all Konica Minolta printers which I have used we must specify the paper size before printing in the printer properties and confirm that the same paper size we have putt in the printer’s tray. if more then one trays and installed in the printer the printer can print all available paper size without specify them. But spouse if you send a legal size print to the printer and there in no legal size paper in the paper tray then it will show a error.
What I think it is paper size issues please check it and make sure the trays are fixed to the size which you putt in.

Jan 24, 2008 | Konica Minolta PP9100 N Economical...

1 Answer

Printing to memorex cd lable paper


the paper feeder cant grip the back side of the paper. It slip through the feeder and the positioning led control cant adjust the correct positioning for printing!

Try another brand of paper!

Jan 18, 2008 | Brother MultiFunction Center MFC-440CN...

2 Answers

Paper will not feed


My OfficeJet Pro K550 makes sounds like it is getting ready to pick-up the Paper but sounds stops and Printer goes back into the ready mode without printing.

Will you please give me some pointers????

Nov 21, 2007 | HP OfficeJet Pro k550 Printer

Not finding what you are looking for?
HP LaserJet 1020 Printer Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96683 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...