Question about Nikon D80 Digital Camera with 18-135mm Lens

2 Answers

Nikon DSL D80 with "r02" error

I am using D80 with Firmware v1.11.
Now, my camera has "r02" error and the shutter is able to press, but it is still showing "Err".
When I have press shutter, the message "r02" is shown.
Please help.
Thank you very much.

Posted by on

  • dodi60 May 12, 2009

    DSL D80 with r02 readout: I get the r02 readout as I depress the shutter. Sometimes I get the shot, even sequential shots, but other times there is no response when I fully depress the shutter. I fidget and fuss and then maybe it works again. And then not. Maybe. But always I get the r02 readout when I slightly depress the shutter.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

I had the same problem too, try everthing .. give up.. calling nikon service centre

Posted on Dec 22, 2014

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Normally, just removing the lens and putting it again you solve the problem. F-- problem means "there's no lens attached !"

Posted on Mar 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nikon d80 camera shows err error, when shutter is pressed the amount of shots remaining, shows er07. shutter works, but no picture is taken. Bracketing sign is also on display and wont go off.l


failure of the aperture unit is the usual cause - usually the contacts for the phase switch have come loose from the gear. You can find info on this by searching for the problem on the internet, including how to repair it.

Apr 06, 2013 | Nikon D80 Digital Camera

1 Answer

PG UP ERROR IN NIKON D 200 CAMERA


Is this a D80 or a D200?

If you had a failure during firmware upgrade, then your circuit board is trashed. Send it to Nikon - it requires software to replace.

Mar 18, 2013 | Nikon D80 Digital Camera

1 Answer

I've given up trying to remove the "err" message from my D80 . I've done everything that was suggested ! removed the lens , cleaned the lens contacts , removed the battery and added a new...


"ERR" is camera error. Two items to try:1/ remove battery while camera is ON while waiting for approx 30 seconds, press and hold the shutter release, insert battery and give it a go. 2/ if there is a camera hardware reset button try that with camera ON. There may be a firmware update on Nikon web site, but if you cannot read the memory card, you cannot install it.

www.nikon.com Choose your country/area and go to support

Dec 05, 2010 | Nikon D80 Digital Camera with 18-135mm...

1 Answer

I have a D80 since 2 years and since last 1 week have been getting the 'Err' message. Initially, after referring to the manual & pressing the shutter release button, the camera responded only ONCE. ...


Hi sandeepbhat2, On page 129 of the D80 manual is the factory reset switch. Look on the left side of the camera there is the terminal cover, inside below the USB connector is a small reset button. Give that a try. If still it does not work you should call Nikon.

Jun 27, 2010 | Nikon D80 Digital Camera with 18-135mm...

1 Answer

My d80 gives me an error message r02, even while hooked up to Camera Control Pro. How do I fix this?


Having gone over a month with no response, I assume this is no longer a problem.

May 31, 2010 | Nikon Digital Cameras

2 Answers

Nikon d80 problem (err flashing with r09 in the lcd display)


I belive this isn't a fault but more to do with how you are using the camera. The r09 message is to do with the camera buffer and how many more pictures it can hold. You do have a memory card installed, right? The r09 is normally not an error, but simply an indicator of how many more pictures you can take in the current burst before the buffer fills. The number will vary according to the image quality and size settings.

Jan 17, 2010 | Nikon D80 Digital Camera

2 Answers

While my Nikon D80 is Error 09, can I update the firmware?


Have you e-mailed or called the techs at Nikon with your problem?

Jan 06, 2010 | Nikon D80 Digital Camera with 18-135mm...

1 Answer

I have a constant error message displayed. The


I have the same camera, but never had this problem. I think there's something wrong with the shutter mirror or worst, the sensor. Did the viewfinder blacked out when you press the shutter? I think you need to bring it to Nikon repair shop....

Oct 16, 2009 | Nikon D80 Digital Camera with 18-135mm...

1 Answer

Nikon D80 error msg "F--" and "r02"


Remove the lens, clean the contacts, reattach the lens, and jiggle the lens to seat the contacts. If that doesn't fix it, either the camera or the lens may require service.

Feb 19, 2009 | Nikon D80 Digital Camera with 18-135mm...

1 Answer

Nikon D80 Camera


During shooting, or when the shutter-release button is pressed halfway, the number of images that can be stored in the memory buffer at current settings is shown on the exposure-count displays in the control panel and viewfinder. "r06" indicates that six images can fit in the camera's buffer, "r08" would indicate eight frames. Any other number could be displayed as well. Burst mode is used when you want to hold down the shutter button and continuously shoot. You are probably shooting in burst mode and your buffer is full, set the camera to single shot and see if that helps.

Jul 02, 2008 | Nikon D80 Digital Camera with 18-135mm...

Not finding what you are looking for?
Nikon D80 Digital Camera with 18-135mm Lens Logo

Related Topics:

2,528 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Digital Cameras Experts

kakima

Level 3 Expert

96576 Answers

Steve

Level 3 Expert

3287 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Nikon Digital Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...