my epson v100 was working fine until recently when it seems to be unable to start properly.
i'd plug in the power and it would power up for a few seconds then the green light goes off. on some days, i'd get far enough to do 2 scans before the power drops off. the carriage is now at the side and i dont know how i can jumpstart it so that it goes back to the middle.
do you have a meter- digital?
measure prior to scan ~14.5vDc when it fails check again
could be the power pack or the small control logic brd near the hinges/buttons
might have to reseat the connector
Was this helpful?
Yes
No
Popular Solutions for Epson Perfection V100 Flatbed
how to scan a document into pdf using epson perfection v100 scanner? i push the pdf button, nothing...
(More)
HOW TO SCAN A DOCUMENT INTO PDF USING EPSON PERFECTION V100 SCANNER? I push the PDF button, nothing happend.
When I scan a large image using the whole face of the scanner, it leaves a stretched/blurry stripe...
(More)
When I scan a large image using the whole face of the scanner, it leaves a stretched/blurry stripe about 1/2 inch in on the side of the image.