Question about Hotpoint WMA30 Front Load Washer

1 Answer

Hotpoint fault? hotpoint Aquarius Extra wma 35 1000 fault? i have a hotpoint washing machine , I put a wash on which when cycle was complete washing was still very wet.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 221 Answers

Check the drain and circulation hoses for partial blockages as usually this causes such problems. Also make sure you using program with full speed spin cycle (solid spiral sign just before the dot pointing the end of chosen programme)

Posted on Jun 22, 2009

4 Suggested Answers

  • 958 Answers

SOURCE: Hotpoint Aquarius WMA 32

please check the outlet hose of the detergent drawer. it could be clogged with soap.

Posted on Feb 13, 2008

barkencoa
  • 3463 Answers

SOURCE: Started having a noisy rinse & spin cycle, then stopped.

Open the washer door and spin the drum by hand, if it feels rough or noisy and rumbling, then the main drum bearings have failed. There should be little or no noise when you spin drum
This is a major repair, and I would not recommend a D.I.Y solution.
Other possibility is there is something in the pump, but you would only hear this when the pump is working.

Plz rate my comments.
Thanks.

Posted on Jan 07, 2009

  • 51 Answers

SOURCE: WMA 54 Hotpoint Aquarius washing machine lights flashing

the problem here is the machine is not emptying when its supposed to, you will find it is stopping at the rinse cycles. there is a sump underneath the machine that needs to be emptied. From my experiences, 9 out of 10 hotpoints that i would of repaired with the same problem as you are having is usualy caused by using the color catcher sheets, they are a disaster.

appliancesdav@hotmail.com

pallesappliancerepairs.com

Posted on Feb 03, 2010

  • 2 Answers

SOURCE: Hotpoint aquarius extra 1000 spin washing but when

Check the machine filter, clean it and this problem might go away. Use manual for locating the filter.

Posted on Feb 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hotpoint Aquarius WMA 52P - My machine makes a lot of noise on the spin cycle. Any ideas?


definatly the drum bearing its common with those washers some repair men will do it for £80 thankyou

Jan 13, 2011 | Hotpoint Aquarius WMA52 Front Load Washer

2 Answers

Hotpoint aquarius extra wma40 - door locked light is flashing and want lock. also before this happened a sound from the machine like an explosion which blew out fuse in the house. please advice


Hi.
I suspect that the top control board has blown , this happens when the brushes wear out in the motor, and short circuit the motor armature, which in turn blows the control board.
Either way it is likely to be an expensive repair, my advice to you would be to buy a new washer if it is more than 5 years old.
I know from experience that this is the most likely course.

Nov 13, 2010 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

Hotpoint Aquarius Extra WMA40 - Prewash light flashing and cycle not completing? The water level also looks to be very high? As tenants this machine has been installed (we suspect second hand) to replace a...


The water level on the Hotpoint WMA range of machine should be below the door, check out the error code definition at this site. You probably have a pressure chamber blockage or partial blockage. There are also workshop manuals for the Hotpoint WMA & WM machines which run through this sort of repair.

Mar 20, 2010 | Hotpoint WMA40 Front Load Washer

1 Answer

WMA 54 Hotpoint Aquarius washing machine lights flashing


the problem here is the machine is not emptying when its supposed to, you will find it is stopping at the rinse cycles. there is a sump underneath the machine that needs to be emptied. From my experiences, 9 out of 10 hotpoints that i would of repaired with the same problem as you are having is usualy caused by using the color catcher sheets, they are a disaster.

appliancesdav@hotmail.com

pallesappliancerepairs.com

Feb 03, 2010 | Hotpoint Washing Machines

1 Answer

Started having a noisy rinse & spin cycle, then stopped.


Open the washer door and spin the drum by hand, if it feels rough or noisy and rumbling, then the main drum bearings have failed. There should be little or no noise when you spin drum
This is a major repair, and I would not recommend a D.I.Y solution.
Other possibility is there is something in the pump, but you would only hear this when the pump is working.

Plz rate my comments.
Thanks.

Jan 07, 2009 | Hotpoint Aquarius WF210 Front Load Washer

1 Answer

When turn washing machine on about 5 - 10 minutes into cycle sets trip switch off and no power. Happens everytime try to use it - tried different sockets - checked fuse. We have hotpoint aquarius extra...


heater probably down to earth and only solution is to check. to test, remove wires from heater, tape them up for safety then start cycle and see if fault still happens

Jun 29, 2008 | Hotpoint Washing Machines

2 Answers

Goes straigt to spin


TRY CHECKING THE BOARD ON THIS MACHINE ESPECIALLY THE MOTOR CONNECTION. WHAT YOU WILL AHVE TO DO IS PUT THE DIAL IN TO THE OFF POSITION ( ONLY AS GUIDE ) THEN DISMATLE THE BOARD FROM THE FRONT FACIA. HAVE A GOOD LOOK AT THE MOTOR PLUG CONNECTION SECTION OF THE BOARD CHECK TO SEE IF THERE ARE ANY TRACKS THAT HAVE BLOWN. I RECONDTION WMA ALL DAY EVERYDAY AND I HAVE HAD THIS PROBLEM BEFORE ONCE AND AM THINKING YEH THAT WAS THE PROBLEM. OR IT COULD BE THE TACO ON THE END OF THE MOTOR BUT THIS IS VERY RARE FOR HOTPOINT WMA UNLIKE THE HOOVER MACHINES.

Aug 21, 2006 | Hotpoint Aquarius WMA42 Front Load Washer

Not finding what you are looking for?
Hotpoint WMA30 Front Load Washer Logo

365 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...