Question about RCA 14F514T 14" TV
I accidentally deleted a channel under lists and labels, before I knew what that was.
I've done all I could do to get the channel back, and not having any luck. The only time I get close to it, is manually putting in Ch 10. The blue screen with No signal comes up. When I go to list and lable, it'll show ch 10 on one line. The box is unchecked. When I move the curser to recheck that box, it skipps over the ENTIRE LINE!
For weeks, I've been trying to rescan channels, and it still won't come back in the list. I've unplugged it for 5 minutes many times. I even tried unplugging it overnight, hoping the reboot would work. No luck, and no ch 10!
This is my 95 year old Mothers tv, and she sure misses ch 10! I've promised if I ever get ch 10 back, the only buttons I'll ever touch is power, channel up/down and volume!
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Had the same thing happen. Go to properties, then advanced and check "print directly to printer". You'll be able to print your coupons. Make sure you go back to your previous settings when not printing coupons.
Posted on May 28, 2008
I am an electronics technician who just happened have been given the same set as you because it was giving the previous owner the same problem. Since I am confident in my trade, I took the set and diagnosed noise in the remote receivers input to the cpu.
What this means is that a capacitor( or something) wasn't working properly and was either not filtering the noise out or it was introducing noise into the data stream that controls the TV through your remote control.
My fix was to essentially cut out the entire remote control input to the TV. Since I have a directtv box to give me remote control, I don't care if the TV's remote works anyway.
The way I did this was to open up the unit and find the front I/O board were the buttons meet the switches for power,chaennel, volume, etc. On that board there is a plug with white wires and one black wire. The two wires to cut are the one next to the black wire and the one all the way at the other end of the black wire. These two wires are easy to splice back if you do not like the results of this procedure so that there is really no risk of damaging your set. If you wish to verify the proper wires to cut, they are the two wires that come from the IR receiver's side of the board YET DO NOT GO TO THE OTHER SIDE WITH THE BUTTONS! There is one wire that does indeed go to both sides.
This may not be a perfect solution but it is free. I hope that this will help someone out there.
Posted on Dec 09, 2008
I had the same problem and finally sloved it. You have to leave the input channels ( Vid1, Vid2, SVid, Cmpt, HDMI, etc ) in the In Channel List. So push the INPUT button, go to VID1, press Menu, go down to List & Labels then check In Channel list. Do this for all the inputs and then run your Channel search again. I hope this works for you. It did for me.
Posted on Jun 24, 2009
You need to replace the microprocessor. GoodLuck there is 52 pins to unsolder and resolder a new one. The price for the chip may bee about $35
Posted on Jun 26, 2009
Tips for a great answer:
Jul 21, 2015 | Toshiba Computers & Internet
Jun 08, 2014 | Samsung BN59-00599A Remote Control
Mar 28, 2014 | Computers & Internet
Jan 28, 2014 | Computers & Internet
Oct 30, 2012 | Samsung LN19A330J LCD TV
Jan 28, 2010 | Texas Instruments TI-83 Plus Calculator
Jun 26, 2009 | Texas Instruments TI-84 Plus Calculator
Sep 20, 2011 | RCA 14F514T 14" TV
69 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: