Question about Televison & Video

1 Answer

Just purchased Innovage Jumbo Universal TV Remote, but kids tossed the programming instructions before I could set it up. I need some help! The TV is a Symphonic. Off brand, I know. Can you help me? Thanks.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,614 Answers

Hi there,

may i know the model# of the unit?

Posted on Mar 01, 2009

  • micromaster
    micromaster Mar 01, 2009

    for initial help, DO this:

    A Jumbo Universal Remote is a wonderful tool for programming your television and DVD or VCR player all into one remote. This remote is also beneficial because it is large and, therefore, more difficult to lose than the typically small remotes that come with your new purchases. If you have a Jumbo Universal Remote, but you no longer have your owner’s manual, and you just acquired a new television or DVD player, follow the below steps to program your new item into your remote. Make sure your remote looks similar to the one pictured in this article, but it doesn’t necessarily have to be the same brand name since these instructions should work for most Jumbo Universal Remotes.



    1. Identify the brand name of your new device, and bring up the list of codes by going tohttp://mscustomercare.com/forms/JumboRem... and referring to Pages 5 through 11. I have also added this link to resources below.

    2. Turn on the device you want to program into your Universal Remote.

    3. Step3

    4. Aim the remote at the device, and press and hold down the Code Search button until the light turns red.

    5. Press the TV, VCR, or DVD button, depending on the device you are programming into your Universal Remote. The red light will blink once and then remain red.

    6. Refer to your list of codes, and enter the first three-digit code in the remote. If it is correct, the red light will turn off. If the light flashes instead of turning off, you will need to try the next code. Keep repeating Steps 3 through 5 until the red light turns off.

    7. Once the light turns off, aim the Universal Remote again, and press the power button on the remote. Then, your device should turn off. If it does not turn off continue Steps 3 through 5 until you find another code that turns off the light.


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need help with the codes for a innovage jumbo universal remote . instruction for T.V. brand name symphonic


Hi there,

Well First, make sure the device you want to connect with your remote is turned on, whether thats the television. Now aim the Innovage remote at the device. Press the button on the remote control that corresponds to the TV. Now, press and hold the SET button on the remote control until the LED light on the remote control holds a steady red.
Enter the 4-digit code for your device by pressing the number keys on the remote control (see list below). When you press the fourth digit, the LED light should turn off. This means the remote and the device are "speaking" to each other. Press the OK button to store the code.
If the LED light blinks three times and then remains a solid red, the Innovage remote doesn’t recognize the code for your device. Verify the correct code, then go through the programming steps again.
Test the function by using your remote to cycle through all programmed TV. 
Turn on the device you wish to match with your remote. Aim the remote at the device and press and hold the Code Search button in the upper left of your remote for at least 3 seconds until the LED light on the remote turns a solid red. Press the button on the remote for the item you want to program TV. The LED light should blink once and then remain a solid red.
Press the On/Off button slowly until the device you want to program turns off. The LED light will blink once each time you depress the On/Off button. When the device you want to program turns off, press the ENTER button. The LED button will turn off and the code for that device will be stored in your remote.

Good Luck!!

Thanks

Jan 16, 2010 | Televison & Video

1 Answer

I have a Sony tv kf-50we610 and a Jumbo Universal Remote by Innovage Products. I need programming codes.


Ok here it is.. I am giving you 2 links:

Sony remote control page 87 (this is the direct pdf): http://www.docs.sony.com/release/KF50WE610.pdf

Your Jumbo remote by Innovage Products:
http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/innovage/jumbo-manual.zip&area=other (this site downloads automatically prompting you to accept and save to your hard drive)



f2d52b0.jpgDon't forget to rate!!

Jan 03, 2009 | Sony Grand WEGA KF50WE610 50" Rear...

1 Answer

I lost the manual for my Innovage Jumbo Universal Remote and I need The codes for a Samsung TV, General Instrument cable receiver and an apex DVD player


You can download the manual at the following site:
http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/innovage/jumbo-manual.zip&area=other
Had the same problem myself...

Oct 15, 2008 | Televison & Video

1 Answer

Innovage jumbo universal remote. code needed for sansui tv


If you have the instructions with the code lists look under Orion, Durabrand, ILO, Emerson, Admiral, Memorex, RCA, Toshiba, Zenith, and World.

Jun 12, 2008 | Televison & Video

9 Answers

Philips universal remote codes


For the majority of phillips/magnavox universal remotes: Hold code search button down till red light satys on. Press the tv button and the red light should blink and stay lit. With the tv on, push the power button repeatedly until the tv turns off.(dont push the power button again after the tv turns off or it will go to the next code). Push the mute button to save the setting.

Feb 07, 2008 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

Tv codes


Google in "innovage jumbo remote" click images at the top left page.
and a image should pop up with the sheet of codes for all tv types

Jan 17, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69955 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6467 Answers

yadayada
yadayada

Level 3 Expert

64286 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...