- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It could be a bad tuner in the set if you are using the Coax fitting for signal---if the rear audio/video inputs work with a cable box you could route signal into one of those instead of the tuner, bypass the issue.
The tv have picture look like a bright dull hallow glow to the screen,yes,than the tv CRT tubes coolant chemicals is bad.Tries websites like Tvrepairworld.com,Tvrepairkits.com to buy a coolant kit to do the replacement.
On the back of the set there will be a label with the full model number and it will also have the month and year the set was made. If the label has been removed or is gone--it should also be on a label somewhere inside the back of the set.
If you do not find the model number on the back of the set unplug the set and remove the back cover and look carefully---all Hitachi sets begin with 53 or number that indicates screen size and then letters and more numbers. 53UDX10B is a 53 inch set etc.
Let me know what problem is when you find the model number and I will help you.
If this information helped you rate this solution as I do this here for FREE.
Yes, it is HD TV ready but you must have a set top box from your cable or dish company that provides a Hi Def signal. The inputs must also be connected with the YRB cable. Only certain channels on my box are HD. The screen is so large that HD isn't nearly as impressive as some of the smaller models but it is still HD. I also have the 53FDX10B.
toni, you`ll need a tv tech for this problem, spark gaps need to be cleaned, crt sockets need to be cleaned and crt pins on all 3 crt`s need to be sanded, this is a common issue with this model set, good luck, BMW Rider