Question about Necchi 3102 Mechanical Sewing Machine

1 Answer

Need hinge for vintage necchi supernova case

This is a 50's machine and the bottom part of the case is made of wood. One of the hinge pins that holds the machine in place and allows it to be pivited in the case is missing. I can't find a replacement or any other way to repair it.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 69 Answers

If you can provide me a picture of the case and hinge, I may have one, send to csews@email.com

Posted on Mar 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a singer 600E. When I put the bobbin case back in place and returned the black metal position piece to the left. Now it will not hold bobbin case in place. Please help.


Please download the user's manual for your machine free at the Singer site, under support. On page 50, it shows you how to remove and replace the bobbin case. I have a feeling that it's not quite in place, and that's easy to do. Ask me how I know.

Mar 16, 2017 | Singer Sewing Machines

2 Answers

Necchi automatic supernova Julia; zig zag won't engage


There is a lever for positioning the needle bar. When you move the lever to the left middle or right , the needle bar too should follow the same. Try to do that. If it doesn't follow the lever and stays at one end, that means the machine needs to be oiled. Not like most sewing machines Supernova swings the bottom rod too to left and right when Zig Zag is engaged. I recommend to spray some WD 40 first, to inside of top and bottom side of the machine , and later to apply machine oil to every moving joints.

Feb 20, 2016 | Necchi Sewing Machines

1 Answer

How do you open the electronic foot pedal for the Bernina 1630?


The foot control function for a motor run condition is variable from 4k ohms to 0 ohms with full depression of the foot control top plate. Heeling back on this control makes a 10k ohms signal for needle down function.
To remove the top cover, peel back the vinyl top covering to expose a single hole above each of the two plastic axle or hinge pins located on each side of the top cover. Insert a pin punch (or other tool)
appropriate in size through the hole, placing the pin end against the hinge pin and pry/pop out the hinge pin. Pull out the hinge pins and remove the cover. Reverse the process to assemble the cover. To insert the barbed vinyl projections on the bottom side of the vinyl top covering, moisten the projections with a little KY jelly and reinsert into the holes in the top plate.
http://www.sewtechnical.com/

May 27, 2015 | Bernina Sewing Machines

1 Answer

How to adjust bobbin case for proper movement.


  1. Using a doubled piece of fabric similar to what you have in mind for your project, sew a seam on the diagonal-pulling the fabric on the diagonal to break the threads. (Ideal tension would either break neither thread or break both threads. So, a single breaking thread signals that the tension needs adjusting.)
  2. Snap out the faceplate to remove it & to gain access the bobbin area below the sewing needle.
  3. Remove the bobbin case & bobbin-lifting the hinged latch that you would to wind a new bobbin-leaving the bobbin in the case. (You need it in there to feel the tension as you adjust it.)
  4. Using a small screwdriver, very slightly turn the screw on the side of the bobbin case clockwise to increase tension; counterclockwise to decrease tension.
  5. Pull the bobbin thread while you hold the bobbin in its case & feel the thread's tension. Too tight of tension would prevent the thread from dispensing (& possibly break), but too loose of tension would allow the bobbin to fall out of its case.
  6. Return the bobbin case to the sewing machine & close the faceplate.
  7. Repeat this whole routine from Step One on the doubled fabric. Stitching should run along both the top & the bottom in the same way-locking in the center. A diagonal pull of the fabric should show which thread(s) break(s). Repeat Steps Two through Four to only adjust the screw aside the bobbin case in order to allow the threads to lock in the center of the fabric with both threads having the same break or no-break result.
25300611-iv4burzhkawezvl2jbah1xae-1-1.jpg

Nov 29, 2014 | Singer 2732 Mechanical Sewing Machine

1 Answer

Necchi supernova manual


Most sewing machines can use a double needle, the one with the single mounting shank and it turns into two needles.
MAKE sure you have Zig Zag needle plate installed to accomodate the double needle.
Turn hand wheel slowly to test then use thread and fabric and turn flywheel by hand to test sew.

Jul 19, 2014 | Necchi Sewing Machines

1 Answer

What is the difference in Necchi BF and Necchi BU?


Necchi BF is a straight stitch machine
Necchi BU is zig zag machine
Necchi BU Supernova had cams for additional stitches

Jul 17, 2014 | Necchi Sewing Machines

1 Answer

Need to find a necchi supernova bu check spring


check with these sites for the part--call them or email them

sewvacdoctor.com
a1sewingmachines.com

Oct 09, 2012 | Sewing Machines

1 Answer

How do i take the case off my brother xr-65 to replace my spool pin and spool cap


I don't have that particular Brother but I have on that is similar.

Start by taking all of the screws out of the back that you can find (they're in deep holes, so look carefully). Then look at the bobbin area and you'll probably find one more. Finally, take the feet off of the bottom of the machine (not the presser foot, the feet that sit on the table), you'll likely find that there is a screw through the middle of the foot that also holds the case in place.

Best of luck

Sep 10, 2012 | Brother Sewing Machines

1 Answer

My mom has a Necchi supernova ultra that needs a new belt. What is the correct size and where do I find one?


Just measure the existing belt and go from there. Besides the supernova and supernova ultra are likely to use the same belt.

Sep 07, 2012 | Necchi Sewing Machines

Not finding what you are looking for?
Necchi 3102 Mechanical Sewing Machine Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Necchi Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

176 Answers

Irene Tulloch

Level 2 Expert

458 Answers

Derek Massey

Level 2 Expert

92 Answers

Are you a Necchi Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...