Whenever I record stuff on my webcam, there is no sound. I know it's not a volume issue cause volume works on other things like youtube and music. How can I fix my microphone? I saw your answer to someone else's question, but I didn't know where the "my computer" button was. Thanks!
on my aspire one xp version my mic isn't working
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has written 20 answers of more than 400 characters.
Re: My microphone on my acer aspire one isnt working
Please try the following: Click Start > Control Panel If the title of your control panel says "Pick a Category", click "Switch to classic view" on the left hand side of he screen. Otherwise, just follow the steps below: Open "Sounds and audio devices" Go to the "Audio" tab Click the "Volume" button under the "sound recording" section Make sure the checkbox by "Select" under Mic Volume is checked, and raise the volume of your microphone here. Click OK until you are back in the control panel. Try your microphone again. If it still does not work, let us know so we can continue to help.
Re: My microphone on my acer aspire one isnt working
Hi, Problem with Acer Aspire Notebook Or Laptops? Just visit the sites.. For any Software problem you can visit a link by just Click Here. For any Hardware problem with this Notebook you can Click Here
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
there could be multiple causes of this problem. to fix we need to proceed step by step.
1. try another microphone - try using an external microphone and see if it works. if yes then there could be an issue with the internal hardware of the mic and to fix it you need to contact acer authorised service center.
if an external mic also does not work then please proceed to step 2
2. check the volume settings - go to control panel and then sound and audio devices. click on the audio tab. please ensure that under the sound recording section the audio driver(for acer aspire realtek mostly) should be selected.
3. go to device manager and reinstall the audio drivers.
4. if this is a recent problem that has been reported then please perform a system restore to a backdate when the mic issue was not there.
please let me know if any of this helps else we can check out further options.
double click the volume icon in the system tray next to your clock.
click Options > Properties
make sure that the microphone is ticked then OK
the microphone option is now added to your volume controls make sure it isnt muted and turn it up.
Repeat this for the recording option when in properties.
Hope this helps
If you have a WEB camera you need to configure your video Webcam settings. Open Skype click on Tools - Options - Video Settings - select your Webcam model.
When you open Skype click on Tools - Options - Audio Settings and click on Microphone and select the microphone you are using and save the setting. If you still have problems with your mic. then - To test if the microphone is working, go to Start - Programs - Accessories - Entertainment - Sound Recorder and record you voice. Can you see your voice recording, the green line should vary as you speek. If you see a flat green line, then the microphone is either faulty or the wrong microphone is selected.
I had the same issue. This is what I found. It seems the Realtek audio and the Microsoft volume drivers are conflicting with each other. If you look at the bottom right (next to clock) you should see the usual grey speaker icon (Microsoft Master Volume controller) and you may also see a reddish speaker (Realtek audio) icon. This should indicate that both are controlling your audio.
If you click [start] - [run], type: msconfig and click [ok]. Click on [startup] tab at top. Look under startup item and uncheck: RTHDCPL then [apply], [ok] and restart your netbook. After it reboots the only audio icon that should appear is the grey speaker (microsoft master volume controller). Your mic should work now. Go to sound recorder and test. You may also need to upgrade to the lasted audio driver from the acer site but try shutting down Realtek first.
to put that in cam microphone working, as I have an equal trade mark cam, you need to see on audio settings properties and change the "recording device" to usb device, instaid of the soundcard as is. that means that the sound recording goes to the cam's microphone.
the steps are:
1- rigth mouse click on the speaker next to the clock OPEN VOLUME CONTROL
2- OPTIONS - PROPERTIES - RECORDING
3 - in MIXER/RECORDING DEVICE (where is your soundcard's name) change to USB DEVICE and then OK
4- select MICROPHONE and the close the volume control windows
5- you can test the mic settings in messenger (any version) because of volume and to a clearest voice sound in your pc.
ATTENTION: carefull with the distance between your cam and your sound speakers because of distorcing sound and feedback
First, make sure you have a webcam with a microphone, and run any test software the webcam came with to check and make sure it is *supposed* to work. Next, open SOUND PROPERTIES through the CONTROL PANEL and then from the menu go to ADVANCED and RECORDING and OKAY, to bring up a volume array that includes the control MICROPHONE. Then, dig around to make sure MICROPHONE is the input being selected for amplification, and try ADVANCED on MICROPHONE and turn on BOOST if it has this control. You can test whether all of this worked by opening SOUND RECORDER from ACCESSORIES and making a short recording of yourself cursing the machine and everyone who designs them. If it plays back normally, try your web camera again. If it still has no sound, the problem is in the settings of the web camera itself. Open whatever software it came with and check setting like MUTE and MICROPHONE VOLUME are set correctly.