Question about Fossil Philippe Starck PH1026 Wrist Watch

Open Question

I CANT GET SPARE SCREWS FOR MY STARCK WATCH

I have lost the two screws that secure the strap of my Starck men's analogue watch (product code PH5020) where can I get replacements please?

Posted by on

2 Suggested Answers

escapement
  • 2334 Answers

SOURCE: Can't set the time or adjust the ******** crystal Starck PH-1100

Take a VERY close look at yor watch and you should notice a few tiny buttons. One of them should correspond to MODE, another to SET and so on- depends on how many your watch has.
Use a pin or a needle to push them and find out the settings procedure.
If you cant find buttons on the case sides, examine case back. They can be hidden between the lugs, so, the strap should be taken off.
Remember- there are no watches in existance without adjustment features. Even atomic clock needs to be adjusted after a few million years of work:))

Good luck.

Arthur

Posted on Dec 17, 2008

escapement
  • 2334 Answers

SOURCE: Strap for Fossil Philippe Starck PH1035 Wrist Watch

Type in your browser FOSSIL WATCHES.
You will find numerous sites. Go thru them till you find what you're looking for.

Posted on Dec 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How many batteries for starck o ring


Take your watch to a jeweler for an accurate battery count and perhaps replacement.

Aug 26, 2014 | Fossil Starck Modern Digital Watch -...

4 Answers

Philippe starck with fossil ph-2006


Fossil Contact Information Main support number 1-800-842-8621
Email support webguy@fossil.com

hope this helps

Mar 25, 2008 | Fossil Philippe Starck PH1026 Wrist Watch

1 Answer

Batery starck fossil


Take your watch to a jeweler to identify type and possibly replace it.

Apr 08, 2014 | Fossil Philippe Starck PH1035 Wrist Watch

1 Answer

I need a manual for a philippe starck ph 1065 watch.


You can get instructions for your watch from the Fossil web site.

Go to "fossil.com", go to the bottom of the page and you will see a
menu, click on "customer care", and then look under "Product Info" on
the left and you will see "watch instructions"

Click on this and a list of diagrams and watch descriptions will appear. Put
your cursor over any of the descriptions and a diagram of the watch face will
appear. Search the list until yours appears and download.

May 16, 2011 | Fossil Philippe Starck PH1035 Wrist Watch

2 Answers

New rubber strap required


At a watch store or Jewelry counter in most department stores.

Jun 30, 2010 | Fossil Philippe Starck PH1035 Wrist Watch

1 Answer

Cant set watch


Follow this link: http://www.fossil.com/webapp/wcs/stores/servlet/Static____Instructions_custCareNav Scroll down and find Philippe Stark watches, then click on appropriate watch. Rate me, plz.

Jan 27, 2010 | Fossil Philippe Starck PH1035 Wrist Watch

1 Answer

Strap for Fossil Philippe Starck PH1035 Wrist Watch


Type in your browser FOSSIL WATCHES.
You will find numerous sites. Go thru them till you find what you're looking for.

Dec 19, 2008 | Fossil Philippe Starck PH1035 Wrist Watch

1 Answer

Can't set the time or adjust the ******** crystal Starck PH-1100


Take a VERY close look at yor watch and you should notice a few tiny buttons. One of them should correspond to MODE, another to SET and so on- depends on how many your watch has.
Use a pin or a needle to push them and find out the settings procedure.
If you cant find buttons on the case sides, examine case back. They can be hidden between the lugs, so, the strap should be taken off.
Remember- there are no watches in existance without adjustment features. Even atomic clock needs to be adjusted after a few million years of work:))

Good luck.

Arthur

Dec 16, 2008 | Fossil Watches

1 Answer

I cant reset the time on my watch it is a stark -1082


hold the left, bottom button (marked ....) for a few seconds....then press the top right button (marked with 1 dot) to change between the hour, minute, date etc. use the bottom right button to advance the flashing number, and when finished setting time and date, use the bottom left button to stop the numbers flashing and return the watch to normal. hope this helps, this is also how to change the date for the other question asker (works on 2 other starck/fossil watches i have and i assume the controls are the same).

Oct 28, 2008 | Fossil Philippe Starck PH1026 Wrist Watch

Not finding what you are looking for?
Fossil Philippe Starck PH1026 Wrist Watch Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fossil Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Jimmy Accardi

Level 2 Expert

98 Answers

EugenesDIYDen
EugenesDIYDen

Level 3 Expert

479 Answers

Are you a Fossil Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...