Question about Blueant Blue Ant 091193 Supertooth II Hands-Free Bluetooth Speaker Wireless Headset

1 Answer

Trying to pair blueant supertooth 11 with nokia n95. these exact pieces have been paired before but now the phone cant see the supertooth 11

Posted by on

  • fransvan747 Mar 26, 2009

    I am having no luck in pairing my Blueant supertooth 11 to my Nokia N95.

    I have followed every instruction, but to no avail.

    Can anyone help me with this.

    My phone just can't seem to find it.

  • Anonymous May 01, 2009

    i have the exact same problem any luck

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,738 Answers

On most phones, you'll go to: Settings > Connectivity > Bluetooth > (turn on) > Phone visibility (shown to all / on) > Search for devices >Choose headset (when located) >
The password is 0000 (four zeros),

I don't have the link for the Super tooth II manual. but here's the link for the Supertooth One manual: (it may help)
http://www.supertooth.net/img/one/mdp_EN.pdf

You'll need Adobe reader to view it. It's free. Download here if you need it:
http://get.adobe.com/reader/

If you found this information helpful, please give me a big thumbs-up when you rate my answer. Thanks!

Posted on Feb 05, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Having trouble pairing phone with Blue Ant ST3


  1. If the Supertooth 3 is on, turn it off by holding down the green Multi-Function button for about 5 seconds (until you hear a voice announce "BlueAnt ST3 powering down").
  2. Hold down "Vol " and the green Multi-Function button until you hear a loud siren/distinctive tone.
  3. The Supertooth 3 will turn on. Hold down the green Multi-Function button for about 5 seconds to turn it off again.
  4. The Supertooth 3 has now been reset: all pairing and other information has been deleted. When you turn the Supertooth 3 back on again it will prompt you to select a language and then go into pairing mode.
You will now need to re-pair your phone with your Supertooth 3.

Apr 17, 2010 | Blueant Supertooth Light Bluetooth Speaker...

1 Answer

Not Connecting to phone


try this site ... its the blueant homepage .. will have a solution there for you ....http://www.blueant.com.au/index.php

Apr 07, 2010 | Blueant Supertooth Light Bluetooth Speaker...

2 Answers

I have a BlueAnt Supertooth BTSLBC3 car speaker that won't pair up to my new BlackBerry curve 8530 phone. The BlackBerry won't see the BlueAnt Supertooth BTSLBC3. The BlueAnt Supertooth BTSLBC3 is paired...


Pairing Your BlueAntStep 2: Activate Pairing Mode on the Supertooth Light
  1. If the microphone arm is open, close it to turn the Supertooth Light off.
  2. Press and hold the answer button.
  3. With the answer button held down, open the microphone arm.
  4. The lights will start flashing red and blue, indicating that the Supertooth Light is in pairing mode.
You now need to activate Bluetooth

Apr 03, 2010 | Blueant Supertooth Light Bluetooth Speaker...

2 Answers

I lost the passcode to my bluetooth i tried 0000 9999 and all others no pairing its a bluetooth 10799 and it goes in ciggerrette lighter and u can talk out loud please help dont want a ticket lol


How to connect or pair a Blueant Bluetooth handfree.

1. Switch off the Blueant:
i.e. push the microphone inside the Blueant.

2a. Press and hold the GREEN telephone symbol (or Accept) pushbutton
On the Blueant flat face for 8 seconds. (this makes unit go into “pairing” mode)

2b. at the same time switch Power On to the Blueant by pushing out
the microphone on the side of the Blueant.

3.The Bluetooth Indicator will turn a blinking red/blue,
when you see this, release the Accept Button .
The Blueant is now in “pairing” mode.

4. Get you mobile in Bluetooth search mode to pair with a new device.


5. The Blueant will request your mobile device for a password.

6. Enter the password= 0000 , the devices now will be paired.

7. Set the Blueant as a trusted/authorized device, if this is option in your phone.

Mar 18, 2010 | Blueant Supertooth Light Bluetooth Speaker...

1 Answer

Cannot pair blueant ST3 wih Nokia 6300


Hi,
Reste the ST3 and then pairi again. It worked for me. Check this link:

http://www.myblueant.com/knowledgebase/reset/st3.php
Deven

Dec 25, 2009 | Blueant Blue Ant 091193 Supertooth II...

1 Answer

Hi, i have a supertooth light BTslbc3 and it has


Did you DROP the BTslbc3 from your old phone? If not, it may not pair with the new one. That is just a suggestion you may want to try. It may not pair with the new if it is still paried to the old. Hope this helps.

Oct 20, 2009 | Blueant Blue Ant 091193 Supertooth II...

1 Answer

I have sphm300 and not able to pair with blueant supertooth


Go to this page, it will answer any question concerning the blueant .. including pairing to your phone .. activating your blueant etc http://www.blueant.com.au/index.php

Jul 27, 2009 | Blueant Blue Ant 091193 Supertooth II...

3 Answers

Supertooth btslbc3


Hope this helps..............

-----How to Create a new Connection----

Pairing with Phone
1. Turn off all devices (ST Light and Phone)
2. Turn on Phone
3. Goto Bluetooth menu on the phone (might be in connectivity)
4. Go to device list or paired devices (make sure bluetooth is turned on)
5. Delete any old profiles that are still in there.

6. Goto the Supertooth Light (BlueAnt)
7. Hold down the green button (send button)
8. while holding it down, open the microphone
9. the light should start to flash "red" and "blue" (you can release the green button)
10. go back to your phone, and go into either 'device list' menu or 'paired devices' menu on your phone.
11. click on either search, add or new devices. Function depends on different phones
12. when the phone has found the device, it should say 'ST Light BA V1'
13. select it, then enter passkey "0000"
14. If your phone ask for authorization or auto connect, just click "yes"

By now, you should be connected to your device. Always remember to close the microphone before you leave the car.
Otherwise, it will slowly drain the battery. If you want to reconnect, just simply open the microphone.

Make sure you turn off your phone once every 2 weeks to reset the phone memory. This will help give a better
performance and clearer sound.

Oct 30, 2008 | Headsets

1 Answer

Pairing supertooth


Go to this page, it will answer any question concerning the blueant .. including pairing to your phone .. activating your blueant etc http://www.blueant.com.au/index.php

Jun 22, 2008 | Blueant Blue Ant 091022 X3 Micro Bluetooth...

Not finding what you are looking for?
Blueant Blue Ant 091193 Supertooth II Hands-Free Bluetooth Speaker Wireless Headset Logo

1,258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Blueant Headsets Experts

Iron
Iron

Level 3 Expert

3018 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1146 Answers

aliasger yq

Level 2 Expert

213 Answers

Are you a Blueant Headset Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...