Question about Panasonic NN-H965 Microwave Oven

1 Answer

Turntable wont stop turning, even when not in use

Just this morning we used the microwave the same way as we always do and after it was done the turntable kept on turning. Even with the door shut and after unplugging and plugging back in, it still turns. Is there a way to turn off the turntable or does it need to be fixed. It is only 1 1/2 years old or so.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 137 Answers

The turntable is a seperate intenty from the microwave itself, I would presume that the switch that turns off the turntable when the door is opened needs replacement.

Posted on Feb 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my whirlpool microwave turntable won't stop turning even when not in use?


There could be a defect in the door latch interface or the control board.

Aug 20, 2016 | Whirlpool Microwave Ovens

1 Answer

Manual for a whirlpool microwave oven model wmh31017aw-1


There is no turntable control. It is always on. The turntable should change direction each time the unit is used. If the turntable is not operating, it has malfunctioned. Newer microwaves for the most part all have full-time turntables to promote even heating, thus reducing customer complaints about ovens that don't heat right.

Dec 30, 2015 | Whirlpool Microwave Ovens

1 Answer

I have a frigidaire over the counter microwave and the turntable quit working


Good Afternoon Friend, I appreciate your post!

If the turntable of your Frigidaire microwave has stop working, often the possibilities include one of three culprits:

  • Power Supply
  • Turntable Turned Off
  • Turntable Support Damaged

I always recommend resetting your microwave first before reaching out to a professional. You can do so by unplugging your appliance or flipping the circuit breaker for about ten minutes and then turn on your microwave.

Best of luck!-Z

Sep 07, 2014 | Frigidaire Over-the-Range Microwave

2 Answers

Phillips microwave oven vt255/bl tuntable does not rotate


HELLO.

The turntable is the unit in the center of a microwave that you set your food on. It rotates during the microwave cycle, making sure all parts of a dish are properly heated. These are typically made of either hard glass or microwave-safe plastic.

Your microwave turntable may not turn due to one of these problems explain below



(1)If your turntable is removable (as many are for cleaning purposes), it may have come loose from this turning mechanism.place the turntable properl on the turning mechanism.



(2)If your turntable was previously working and now does not any longer, check the settings on your microwave's LCD display to make sure you haven't accidentally turned off the turntable.


Most microwaves have different settings that the user can select with the press of a button, like a "Defrost" setting or a "Popcorn" setting. Certain microwaves may stop the turntable from turning during certain pre-programmed selection modes. Stop your microwave and don't use a pre-programmed mode. Instead, just specify the time using the number pads and start your microwave to see if your turntable begins to rotate again.



(3)The rotating mechanism on the inside of your microwave that rotates the turntable is actually connected to a small motor on the inside of your microwave's case. If this motor burns out or stops working, the mechanism will stop turning. This is something that needs to be replace.

FOLLOW THESE STEPS TO REPLACE THE FAULTY MOTOR.

THINGS NEEDED.

* screwdrivers

* replacement motor

* specific microwave information and part number


1 Open the microwave door, and carefully remove the turntable tray. Also, remove the frame that the turntable is positioned on. Both the turntable and the frame are not secured in the oven, so removing them is a quick process.

2 Remove the bottom panel of the microwave. The Microwave Wizard website explains that the number of screws securing the panel varies depending on the manufacturer and specific microwave. Once the bottom panel is loosened, disconnect its wiring harness in order to completely remove the panel.

3 Locate the turntable motor. The Microwave Wizard website explains that the motor compartment should be positioned below the center of the microwave. Unscrew the motor, disconnect the wires, and remove it from the microwave.

4 Determine the specific part number for the turntable motor so that a correct replacement can be purchased or ordered. Position the new motor into the shaft in the bottom of the microwave. Screw the motor securely into place.

5 Test the microwave to make sure that the turntable motor is operating correctly. The Microwave Wizard website explains that the motor can make noises if it was not positioned evenly in the shaft. Reconnect all of the wires that were detached when removing the old motor.

6 Reinsthall the microwave's bottom panel parts, and secure all of the screws in place. Reposition the turntable frame in the bottom of the microwave and place the turntable on top of it. Test the microwave in order to make sure that everything is working correctly.

Thanks.

Oct 01, 2011 | Whirlpool Microwave Ovens

1 Answer

Phillips whirlpool microwave turntable not turning


HELLO.

The turntable is the unit in the center of a microwave that you set your food on. It rotates during the microwave cycle, making sure all parts of a dish are properly heated. These are typically made of either hard glass or microwave-safe plastic.

Your microwave turntable may not turn due to any of these problems explained below.



(a)If your turntable is removable (as many are for cleaning purposes), it may have come loose from this turning mechanism.place the turntable properly on the turning mechanism.


(b)If your turntable was previously working and now does not any longer, check the settings on your microwave's LCD display to make sure you haven't accidentally turned off the turntable.
Most microwaves have different settings that the user can select with the press of a button, like a "Defrost" setting or a "Popcorn" setting. Certain microwaves may stop the turntable from turning during certain pre-programmed selection modes. Stop your microwave and don't use a pre-programmed mode. Instead, just specify the time using the number pads and start your microwave to see if your turntable begins to rotate again.


(c)The rotating mechanism on the inside of your microwave that rotates the turntable is actually connected to a small motor on the inside of your microwave's case. If this motor burns out or stops working, the mechanism will stop turning. This is something that needs to be replace.

follow these steps below to replace the faulty motor.

1. Open the microwave door, and carefully remove the turntable tray. Also, remove the frame that the turntable is positioned on. Both the turntable and the frame are not secured in the oven, so removing them is a quick process.

2 .Remove the bottom panel of the microwave. The Microwave Wizard website explains that the number of screws securing the panel varies depending on the manufacturer and specific microwave. Once the bottom panel is loosened, disconnect its wiring harness in order to completely remove the panel.

3. Locate the turntable motor. The Microwave Wizard website explains that the motor compartment should be positioned below the center of the microwave. Unscrew the motor, disconnect the wires, and remove it from the microwave.

4. Determine the specific part number for the turntable motor so that a correct replacement can be purchased or ordered. Position the new motor into the shaft in the bottom of the microwave. Screw the motor securely into place.

5. Test the microwave to make sure that the turntable motor is operating correctly. The Microwave Wizard website explains that the motor can make noises if it was not positioned evenly in the shaft. Reconnect all of the wires that were detached when removing the old motor.

6. Reinstall the microwave's bottom panel parts, and secure all of the screws in place. Reposition the turntable frame in the bottom of the microwave and place the turntable on top of it. Test the microwave in order to make sure that everything is working correctly.


Thanks.

Oct 01, 2011 | Microwave Ovens

1 Answer

My JVM1653 stopped cooking, The turntable turns


your magnetron might be out. its what heats

Feb 13, 2010 | GE JVM1653 Microwave Oven

3 Answers

Turntable stopped working


Most of these are belt driven. You need to uncase the unit and check the belt.

Like anything with high voltage, use good safety practices.

Dec 15, 2009 | GE Spacemaker JVM1640SJ Microwave Oven

2 Answers

Turntable sometimes works, mostly doesn't


It sounds like you have a jamming turntable motor.

The turntable system consists of the motor, the coupler, the turntable support with rollers, and the tray.

You can see and hear a video of how a turntable motor should sound when you rotate it by hand.

If yours won't rotate or it sounds like it's grinding, etc., you may have a bad motor or plastic coupler.

To replace either, you need to unplug power, then remove the bottom cover of the oven.

You can usually find helpful exploded view diagrams and order parts by entering your full model number here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Jan 28, 2009 | Microwave Ovens

Not finding what you are looking for?
Panasonic NN-H965 Microwave Oven Logo

1,029 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

8820 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

224 Answers

Are you a Panasonic Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...