I've never worked with the Panasonic D1232 before. I have a customer that has 16 instruments on the D1232. They want to add 2 more. I noticed the KX-TD1232 can be expand to 32 stations. The system looks quite a bit different than D1232. Can the D1232 be expanded to 32 stations also?
An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: How many stations can a Panasonic D1232 support?
If it says D1232 on the box, it's a TD-1232. Look at the black and silver tag on the side of the KSU, IIRC the TD-1232's tag is on the lower right outside above the power cord. Three is a TA-1232 a TD-1232, and a 123210/11. Only the TD is digital (uses 72xx/74xx phones).
As far as SYSTEM phones, the TA/TD 1232 come out of the box as 8x16 devices and you add cards to expand it. These cards have -70 part numbers and are fairly difficult to find. (I think I have one or two on my shelf). If you really have a 123211, it also expands by using cards, that fit vertically in the card file with an AMP connector plugged into its face. Those are easier to find, the risk there is when you turn off the system to install them, it sometimes forgets to power back up.
Lastly, if you really have a TD with digital phones, there is an ANALOG port on the back of each digital phone that can be wired for seperate extensions (by default it's 100 more than the digital extension). You can add single line devices in those ports.(Some restrictions apply :-). For two quick phones, you might go that route.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
On the D1232 box open the main door and there is a switch front lower right (normal - clear)... switch to clear and go to the main or number one phone and hit program *# ******* (7 stars should do it)
once your logged in hit 107 and then next to view current password
once you have the password you can switch it back to normal and log in with that password by hitting Program *# (password)
The MOH port is on the right side of the box. You need to get into programming and turn it on. Check 990 optons and 803. By default it's set for Music 1 and turned on, but if it beeps now or gives ringback tone on transfer, someone has changed it.
I can get you there, but you have to do some programming.
A Panasonic TD-1232 starts its life with 16 analog and 16 digital ports. On the back of your digital phone is a modular jack called an XDP If you plug in a single line device and dial 390 from the digital set, and it's programmed, you will split the extensions to whatever your number is and 100 more than your number (by default). So, if you're 110, the XDP analog port is 210.
Once you get that far, it's a (fairly) simple matter to go into programming and make 10-2 (the second port for your hardware) ring on any and all lines you choose.
I hope this is a good start, as full programming is beyond the scope of a free forum.
Changing the Class of Service COS of that extension to "1" will allow it to dial anything.
In a TD system, that is a 2-step process, because you have to find where the extenion jack is located in the system.
Go into programming and dial 003. If you press the SP PHONE button, it will step you through all the ports in the system and give you extension numbers. To start 01-1 will be 101 01-2 201 02-1 102 etc. Since you're in a motel, it should be renumbered to match the rooms and if you started with 100 or eliminated 113 your whole plan may be different.
Once you find the jack number for your station, press the HOLD button and dial 601 SP PHONE and the 2 digit jack number from above. You will be looking at your extension COS. Dial 1 STORE and it will turn off that extension's toll restrictions.
Please rate this solution and let me know if you had any problems following this instructions.
Even though the hardware doesn't exist, the numbers do. The universe of 101-164 and 201-264 are already taken. Oops, 200 might be available, 100 might be available. 167 and 168 and the 80's might work.
It's a 3 step process. Change 210 to 200 change 225 to 210 and change 200 to 225. There's your "swap".
Now, keep in mind that the XDP port for 110 is 210 and if your voice mail is analog.....Ah, but that's another thread.
Without looking up details on versions, I think you may have an early D1232. Look at the plate on lower edge/front and see if there is a number in a circle. If there is no version number, the serial number will tell when the system was made.