Question about Brother XL-5130 Mechanical Sewing Machine

1 Answer

I NEED THE ADJUSTMENTS FOR THE SITCHES DO NOT HAVE MANUAL

ON THE MACHINE XL-5130 BROTHERS, THERES THREE DIALS FOR ADJUSTING THE SITCHES, I NEED THE SPEC'S FOR REGULAR SITCHING

Posted by on

  • Anonymous Mar 29, 2009

    I do not have a manual and need to know the settings for the machine

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 137 Answers

Try this URL:

www.sewingmanuals.net

Posted on Mar 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace a spring on a brothers sewing machine


This is no exception, Please take your machine to a authorized repair shop to have the machine repaired properly. Note: Most machine manufacturers do not sell parts to the public! Ill repaired machines can be dangerous to use is most cases.
Cheers,
Kelly
Embroidery Services
San Diego, CA

Mar 02, 2015 | Brother XL-5130 Mechanical Sewing Machine

1 Answer

Camp that holds the needle on the needle bar came of and cannot get it back on


You should be able to slide it from the bottom and push it in upward position and turn the screw to tighten. Hope this helps!Jimmy

Mar 28, 2012 | Brother XL-5130 Mechanical Sewing Machine

1 Answer

The little thing that the needle goes into broke. How can i get a new one and what is it called? I have a Brothers machine XL 5130


it's called a needle clamp-check sewingpartsonline.com
on the left hand side click on brother parts
go down till you find your model number there is a brother xl 5130
it's close to the bottom of the page
please rate this with the thumbs in upper right hand corner

Aug 09, 2010 | Brother XL-5130 Mechanical Sewing Machine

2 Answers

What are the settings for regular sewing, I do not have a manual. It has 3 knobs on the front and 1 on top? This might have something to do with my problems.


The three front dials are as follows....left to right-Stitch width, type of stitch, and stitch length. The dial on the top adjust the top tension.

For straight stitch you want 0 stitch width, straight stitch, 3 for stitch length.

For zig zag you want turn your stitch width to how wide you want the zig zag, choose zig zag stitch, and choose how close you want the stitches to be on the stitch length dial. Practice on a piece of fabric. Usually for zig zag you will want to loosen your top tension a little bit.

Aug 11, 2009 | Brother XL-5130 Mechanical Sewing Machine

2 Answers

The thread is gathering under the feed plate and not sewing correctly


The bobbin tension the this particular machine is not adjustable. You may need to take it in to be serviced and re tensioned. Hope this helps. Good luck.

Aug 11, 2009 | Brother XL-5130 Mechanical Sewing Machine

1 Answer

The presser foot came off Brothers sewing machine


position the foot under the shaft making sure the horizontal pin on the foot is in line with the horizontal groove on the end of presser foot fitting on the shaft. Lower the pressor foot arm and it should snap right on. If not, press it up manually. the directions should be in your manual. If you don't have your manual, you can get it online at www.brother-usa.com

Apr 04, 2009 | Brother XL-5130 Mechanical Sewing Machine

Not finding what you are looking for?
Brother XL-5130 Mechanical Sewing Machine Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Irene Tulloch

Level 2 Expert

434 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...