Question about Dell Dimension 4300 PC Desktop

1 Answer

Where might i find the pci to disconnect - Dell Dimension 4300 PC Desktop

Posted by on

  • Nagendra Baliga May 11, 2010

    Hi, If you are talking about disconnecting a PCI Card, then you have to open the computer tower and unsecure the screws and undo the PCI Card.

  • Imre Vetro May 11, 2010

    What do you mean you'd llike to do?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 21 Answers

To disable the Card without opening the computer go to Contron Panel then System then on a subtab click on the Hardware tab then click the button that says Device Manager. Then go down to Network Adapters and click the + sign then find your PCI Card. double click it then its either under General or Driver and find a button that says Disable or if you please you can uninstall it and that will disable it.

Posted on Mar 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't get my monitor our of sleep mode


You can connect a known working monitor and see if you get a display, if not, and you are using onboard video it may be defective and you will need to get a replacement video card, look to see what kind your system supports, pci express or agp or pci.
If the other monitor works then try this, disconnect the power cord as well as the vga cable going to the computer for about five minutes.
If this still doesn't work then you will need to replace the monitor.
I hope this helps.
Good luck and have a fantastic day.

Jun 22, 2011 | Compaq Computers & Internet

1 Answer

I need instructions on how to install a new Graphics card for my HP Pavilion a6600f. How do I go about doing it safely. I do not want to risk making a mistake. I will also be installing a new power...


From the manufacturer's web-site:

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01357119&tmp_task=prodinfoCategory&lc=en&dlc=en&cc=ca&lang=en&product=3794742#N201

this motherboard:
  • Also supports PCI Express x16 graphics cards
  • Turn the computer off.

    Disconnect the AC power cord.

    Disconnect the "data" cord from the "on-board" video-card.

    Remove the side-panel.

    Buy a PCI-E video-card.

    Insert the video-card into the PCI-slot -- make sure that it is fully "seated".

    Connect the "data" cord from the monitor to the new video-card.

    Replace the side-panel.

    Reconnect the AC power-cord.

    Turn the computer on, and let Windows "discover" the new video-card, and load new device-drivers.


    Dec 20, 2010 | HP Pavilion a6600f Desktop PC

    1 Answer

    Instructions for installation of USB 2.0 PCI card


    Turn the computer off.
    Disconnect the AC power cable.
    Remove the side-panel.
    Remove the "filler" spine from one of the PCI slots.
    Insert the card.
    Tighten the screw, to securely hold the card.
    Replace the side-panel.
    Reconnect the AC power.
    Restart.
    Windows should automatically "detect new hardware".

    Aug 20, 2010 | HP Computers & Internet

    2 Answers

    Everex GA3400 no video, no BIOS splash, nothing. Install PCI card


    Hello,

    First look for a CMOS battery on the motherboard. If found, disconnect the battery and also disconnect the power cables from the system.

    Wait for about 10 minutes and then reconnect battery.

    Turn it on. If it remains same, try to re-seat memory modules and let me know if you get any beep sound when you turn on the system


    Feb 18, 2010 | Everex GA3400 PC Desktop

    2 Answers

    WHEN I PRESS POWER BUTTON NOTHING HAPPENS


    Disconnect the Power cable / A/c adapter/Battery from computer.
    Disconnect External peripherials.
    Hold down the power button on the computer for 10 seconds.
    Reconnect the power cable or A/c adapter and battery or the computer
    Try to turn on the computer
    check for Led's on the computer
    If still no display ,shut down the computer,disconnect power cable.
    Open the computer tower,remove memory modules,reconnect power cable and turn on the computer.If you get a beeping sound after turning on you should be getting beeping sound suggesting the mother board is not bad.Turn on the computer and disconnect power cable from computer.
    Reseat 1 memory at a time if you have 2 memory module or if single memory module reseat in different memory slot,swap memory module.
    Reconnect the power cable and turn on the computer if it boots to desktop possible issue with 1 of the memory module.
    Disconnect the harddrive ide cable from the harddrive .Turn on the computer.
    If still unable to power on .Shutdown the computer and disconnect power cable.Remove video card,sound card ,modem card if any .Connect just the vga cable from monitor to the integrated video port.
    Connect power cable and turn on the computer.
    If computer turns on possible issue with one of PCI or PCI express card.
    If still unable to power on.Disconnect the power connector pin from the motherboard and reconnect it back.Turn on the computer check power power led on motherboard,also check if the processor fan is spinning. if no go then issue with motherboard. GOOD Luck.!!

    Aug 27, 2009 | Insignia D400a PC Desktop

    1 Answer

    No powering on


    Resolution:
    Disconnect the Power cable / A/c adapter/Battery from computer.
    Disconnect External peripherials.
    Hold down the power button on the computer for 10 seconds.
    Reconnect the power cable or A/c adapter and battery or the computer
    Try to turn on the computer
    check for Led's on the computer
    If still no display ,shut down the computer,disconnect power cable.
    Open the computer tower,remove memory modules,reconnect power cable and turn on the computer.If you get a beeping sound after turning on you should be getting beeping sound suggesting the mother board is not bad.Turn on the computer and disconnect power cable from computer.
    Reseat 1 memory at a time if you have 2 memory module or if single memory module reseat in different memory slot,swap memory module.
    Reconnect the power cable and turn on the computer if it boots to desktop possible issue with 1 of the memory module.
    Disconnect the harddrive ide cable from the harddrive .Turn on the computer.
    If still unable to power on .Shutdown the computer and disconnect power cable.Remove video card,sound card ,modem card if any .Connect just the vga cable from monitor to the integrated video port.
    Connect power cable and turn on the computer.
    If computer turns on possible issue with one of PCI or PCI express card.
    If still unable to power on.Disconnect the power connector pin from the motherboard and reconnect it back.Turn on the computer check power power led on motherboard,also check if the processor fan is spinning. if no go then issue with motherboard.

    Aug 24, 2009 | Dell Computers & Internet

    3 Answers

    I have a Dimension 2400 Celeron desktop. Can I put in a wireless card?


    Hello

    Yes unless the PCI slots are already being used. Buy a Linksys or Dlink PCI wireless card and follow the instructions very carefully. You will be at some point opening the case. Make sure then power is absolutely disconnected. I'm assuming you do have a wireless network already? If not then you'll need to purchase a wireless router also.

    Jul 28, 2009 | Dell Dimension 2400 PC Desktop

    2 Answers

    My hp media center pc m8000n has a black screen and the tower beeps


    Well, it looks like we can limit the problems to either a motherboard or graphics card failure. Are you able to access the BIOS? Does the monitor say it is disconnected?

    Jul 08, 2009 | HP Media Center PC 873n (P9875A#ABA) PC...

    1 Answer

    Change from PCI Ex 16 back to Motherobard Video card


    Hi there.
    There are no jumpers to move at all, just turn the computer off, take out the PCI Express card, put back the side panel and plug the VGA lead into the on-board D-plug and boot up the computer and that's it.


    Good luck and thanks for choosing FixYa!!

    Jun 05, 2009 | HP Pavilion a1340n PC Desktop

    1 Answer

    I accidently Switched My Display to PCI Settings in the BIOS Settings in my computer. Now the display of my monitor is off but my Computer is running


    With computer disconnected for elecctric,Go into machine. Disconnect the battery. Reconnect the battery. Start computer back up gettign back into the startup routine and change it back.

    Dec 14, 2008 | Computers & Internet

    Not finding what you are looking for?
    Dell Dimension 4300 PC Desktop Logo

    Related Topics:

    42 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Dell Computers & Internet Experts

    Brian Sullivan
    Brian Sullivan

    Level 3 Expert

    27725 Answers

    joecoolvette
    joecoolvette

    Level 3 Expert

    5660 Answers

    Les Dickinson
    Les Dickinson

    Level 3 Expert

    18331 Answers

    Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...