Question about Chicago Pneumatic Rotary Tools

1 Answer

I bought Chicago 80 p rotary set without instruction

I just recieved Chicago rotary set, which I bought on ebay, but there are no instruction, where can I find instruction for it? I am not familiar with the tool, and its hard for me to figure out what goes where and how I can use particular tools,tnx

Posted by on

  • 3 more comments 
  • astro5lara Feb 28, 2009

    55" cord; 120 volts, 60 Hz; Amps: 0.7 no load; 1.2 load, 0.6 start up; Rotary tool dimensions: 4-13/16" L x 1-3/8" diameter--this is the tool, its compact, but without instruction I cannot use it because it could be dangerous..

  • astro5lara Feb 28, 2009

    here is the page from ebay where i bought the tool,http://cgi.ebay.com/ws/eBayISAPI.dll?Vie...

  • astro5lara Feb 28, 2009

    Hey, thanks, dremel looks alike the one i bought, the name on my tool says Chicago for some reason, tnx joboo

  • Jim London
    Jim London May 11, 2010

    Hi, Wow that's cool! What tool did you get? There are lots of different ones like a sander, ratchet, impact wrench, even a riveter and much more. They are all air driven but use different pressures to operate. What kind of compressor do you have? If you let us know what you have it will be a lot easier to help you. Thanks

  • Farley Redfield
    Farley Redfield May 11, 2010

    If I could see a pic I may be able to help you.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 256 Answers

Dude!!!!!! This is NOT a Chicago tool nor is it pneumatic! Chicago tools are air powered. This is a rotary tool. Looks like a very nice one at that. The world leader in rotary tools is Dremel. Although the tool you have is not a Dremel. I am going to direct you to their website as they have a great introduction to rotary tools, they explain how-to and give details on all of the attachments and what they are for. They are also explicit on safety and give detailed safety instruction. I personally have four different Dremel tools and hundreds of attachments, if you need any advice on any of things please feel free to contact me again. This will Fixya!
http://www.dremel.com/en-us/customerservice/gettingstarted/Pages/default.aspx

Posted on Feb 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a qrs 10 air compresser gettting water in air lines and it has a air dryer


When the compressor at work allow the water to get in the lines the solution is to replace the filters in the dryer as they are blocked and the air bypasses them to get to the system. Check to see if that is the same problem

Feb 05, 2013 | Chicago Pneumatic Qrs 5 HP/3 Phase Rotary...

1 Answer

I have oil leaking out of the air inlet filter on a qrs5.0 any ideas what the problem would be?


If it is an oil bath air filter, overfilling the filter could do it.

If there is excessive vibration that could cause it.

Possibly during shutdown some backflow of air occurs.

Nov 17, 2009 | Chicago Pneumatic Qrs 5 HP/3 Phase Rotary...

1 Answer

Im new at this, and I woul'd like to know how to use it! Theres no problem with my set.


If this is Dremel go to Dremel.com and you can download an owners manual or call toll free and speak with one of their tech guys to help you get started.

Sep 30, 2009 | Rotary 80 Pc Tool Set Hobby Detail Sand...

1 Answer

In CPB30 screw compresser lub oil leak in air outlet ! what is sourse of problem and how to solve it?


ussually it comes from being shut off while its running. allways make sure that its quit its cycle and is not running before you shut it down.if your not going to be using it for a while as in going home for the night it is a good idea to turn it off to keep power outages from doing so

Sep 18, 2009 | Chicago Pneumatic Qrs 5 HP/3 Phase Rotary...

1 Answer

Can i convert a 3 phase 10hp qrs compressor to single phase?


Search the 'net for phase converters. I have read articles about making your own phase converters from old 3 phase motors----Fine Woodworking mag.

Apr 26, 2009 | Chicago Pneumatic Qrs 5 HP/3 Phase Rotary...

1 Answer

I bought my son a NatGeo Rock Tumbler for Xmas and I have lost the instructions! HELP


I can't find anything for the NatGeo Rock tumber ( I assume it is National Geographic) but I did find a site that has free instructions on how to use a tumber and hints for the best results, The site is Geology.com and they have I hope the information you need. I wish I had better results.

Jan 29, 2009 | Rotary Thumlers Tumbler Polisher...

2 Answers

Useing a dremel stylus


I would call Dremel tech service at 1-800-437-3635 and ask them and also get a copy of an instruction manual for future use.

Jan 28, 2009 | Dremel Stylus Rotary Tool

Not finding what you are looking for?
Rotary Tools Logo

Related Topics:

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chicago Pneumatic Rotary Tools Experts

Mike

Level 3 Expert

4331 Answers

Jay Finke
Jay Finke

Level 3 Expert

1222 Answers

Brad Brown

Level 3 Expert

13569 Answers

Are you a Chicago Pneumatic Rotary Tool Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...