Question about Washing Machines

2 Answers

Electrolux EWF 1087 - Power on, light goes orange, nothing works.

This washing machine is 3 years old and was working fine. This happened once before, under warranty. The service agent powered on while holding down other buttons to reset the electronics and all worked OK.

Does anyone know the ''maintenance reset'' startup buttons?

Posted by on

  • Anonymous Mar 19, 2009

    same problem

  • kara910 May 15, 2009

    same!

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hold reset and start buttons down, while turning on. Hold down for about 10 seconds.
If you're getting an E90 error code, which means communications error, it means you have a dodgy connection between the main board and the control panel.
Disconnect the power completely, open up the top of the machine and reseat the plugs on both ends on the blue ribbon cable connecting the front panel display to the main board. (The main board is the big white plastic thing with all the wires running into it).
Do the reset steps when turning on again, should be good to go, otherwise it's a bit more serious and you'll need the tech back.

Posted on Jun 30, 2010

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This washing machine is 3 years old and was working fine. This happened once before, under warranty. The service agent powered on while holding down other buttons to reset the electronics and all worked OK.

Does anyone know the ''maintenance reset'' startup buttons?

Posted on Jun 12, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our Maytag Centennial Commercial washer is exactly 3 weeks old today. I've done about 12 loads in it so far, none of them heavy. I put in a load today, and it wouldn't start. I unplugged it


I would suggest that as it is a new unit , it is covered by warranty so why don't you call the service agent for a warranty inspection and fix rather than loosing your cool
there is nothing you can do while it is under warranty as any fix by other than authorized service persons will void the warranty

Oct 02, 2016 | Maytag Centennial 3.2 cu. ft. SuperSize...

2 Answers

My 3 month old bosch 300 series washer isn't draining completely and errors at the start of the rinse cycle with E13 falshing along with the rinse light. Help!


the E-13 error code is a drain timeout code. This means the pump has run a certian amount of time without fully draining itself. This could be anything from a clogged drainline in your home to a clogged drainline in the machine, your pump is clogged, pump is burned up, no power to the pump, bad board etc. Most of the time its either something jammed in the pump, or its burned up (from something being jammed in it). Just have to take her apart to find out for sure.

Aug 10, 2008 | Bosch Washing Machines

1 Answer

Machine runs real real slow. Not yet a year old....help


possible problem in foot control or speed control
as it less than a year old it will be under warranty so take it in to a service agent and have it checked under warranty

Feb 24, 2016 | Brother Sewing Machine Project Runway...

1 Answer

My washer is only 4 months old. It was working fine and now it keeps stopping at the wash cycle- It fills up okay and then it gets stuck at the wash cycle....it keeps beeping and the wash light is...


Good day,
Knowing the problem would be nice, but if it's under one year of age, it is under factory warranty.
I wouldn't worry about it. Just call your selling dealer for a warranty repair. It should be totally free to you.

Nov 13, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

GFi breaker blows


There is an electrical problem with the brewer. If you will please get the model and date code located on the bottom of the machine, and call customer service, we will be happy to assist you with this. The machine has a 3 year warranty and if the machine is 3 years old or less, it will be replaced at no cost. If it is over 3 years old, it will be replaced at a reduced price.

Apr 23, 2009 | Bunn BTX-B ThermoFresh 10-Cup Home Thermal...

1 Answer

Hobart lxih


E4 indicates water level has not reached top water sensor. Check for proper flow-water pressure to machine (15-25psi) and clean sensor in wash tank

Jul 16, 2008 | Hobart 24 in. LXIH-3 Built-in Dishwasher

1 Answer

My washing machine is not working properly when moving the washing machine out of my apartment I noticed that one of the pulleys was ruined and the washing machine was smoking very badly it is the pulley...


Go to repairclinic.com or partselect.com to get the parts, you will need a model number.

Honestly I dont know if Magic Chef even builds washer anymore or has in the past several years. with that I would assume your warranty has expired. You will need copies of when you bought the washer and a copy of the warranty to full fill any warranty claims plus an authorized Magic Chef service agent will have to preform warranty work if it is still under warranty.

Jul 09, 2008 | Washing Machines

1 Answer

Maytag MAH8700A


Joe, ds is a door lock malfunction. The door lock latch shows closed and the door switch shows open. Try this, unplug the unit for 60 seconds and see if the error comes back. If it does, with the power on press and hold the chime and xtra rinse pads together for 3 seconds. This will put it into the service mode. Once in the service mode press the chime button again to unlock and the temperature pad to lock. See if they operate. If still no luck you are going to have to do some tests on the door lock switch to see whats happening. You do have a 2 year warranty on these parts and being that it is only a year old, tell them to throw in the labor....Catriver...post back.

Dec 13, 2006 | Maytag MAH8700A Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

1,255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

yadayada
yadayada

Level 3 Expert

70365 Answers

Brad Brown

Level 3 Expert

15111 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...