Question about Black & Decker Black&Decker Ft1000 Electric Flex Tube Blower 140mph

Open Question

Plug parts - Black & Decker Black&Decker Ft1000 Electric Flex Tube Blower 140mph

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a featherlite 25cc 150 mph blower that has goos spark and the carb has been cleaned yet it wont start and is flooding fuel out the exhaust?


I seems you have answered your own question: combustion chamber flooding...so the during exhaust stroke fuel remains in the chamber, or is being sucked in from the tank. Fuel pump diaphragm is the most likely suspect part; and is a routine wear out and replacement part. After replacing, be sure to maintain according to mfr recommendation for storage (generally it's to flush tank with un-oiled fuel before storing) to avoid early wear out of fuel pumps diaphragm.

Oct 28, 2014 | Weedeater Garden

1 Answer

How to spark test leaf blower


You can either use the units own spark plug as a visual tester or get an inline tester from a parts store. Most of the time just using the unit spark plug is enough. As long as you can see the head of the plug while it is resting on a metal part of the engine for grounding purposes. They make 20000 volts so it should jump a good sized spark plug gap no problems.

Be safe and good luck!

Jul 02, 2014 | Poulan/Weed Eater No. Bvm200le 711482 24cc...

1 Answer

Won't start


Are you getting spark on plug? Check to make sure wire is connected to plug, if still not starting. Is fuel getting to plug? Remove plug an see if its wet. If its wet it could be flooded. If not fuel lines are common on saws, tank in is a major problem it cracks an need replacing. Have you checked the on off switch? If it still wont start, carb is more than likely the problem. Remove it an get a rebuilt kit, they are cheap, carefully remove all parts clean out all orifices even small ones with a piece of brass or steel bristle from a brush, use carb cleaner to clean the parts, carefully put it all back together an it should start. That is about all there is.

Mar 25, 2014 | Husqvarna 130bt 130 Bt Gas Powered...

1 Answer

Bg86c spark plug change


the tool you got with the unit for changing other parts
usually is a T shape and has two hex socket at the top of the T and the stem has a torx 10 or similar on it

is also used to change the spark plug

Nov 16, 2013 | Stihl Bg 86c Handheld Blower Cylinder...

1 Answer

I have a 5.5 Honda pressure washer, no fuel is getting to the spark plug. Cleaned carb, carb is getting fuel just not flowing into combustion chaimber. It has to be a carb problem ! What part of the carb....


The float and the valve it is connected to let fuel into the carburetor. The flow jets meter the fuel into the engine. These jets have very small holes in them and easily plug up. You might want to get a complete overhaul kit for your carburetor so you'll get new gaskets, and other wear parts .

Aug 14, 2010 | Honda Chipper Blower and Vac: 5.5 Hp Gas

1 Answer

Will not start, replaced fuel lines (1 was broken) and spark plug


does it even run at all for a short bit? If not pull the spark plug from the unit, place some part of the spark plug threads on the metal surround the spark plug hole in the engine, turn the unti manually with the pull cord/starter and see if you get spark, if no spark it could be the Ign. coil module, a bad spark plug wire, or a break in the wiring to the ign. coil module.

Jun 07, 2010 | Poulan Weed Eater Electric Blower/Vacuum...

1 Answer

I have a UT08580 Mighty Lite backpacker blower with a missing spark plug, I need to know what plug goes in it.


The Homelite part number for this spark plug is 870174001. This number crosses to Champion spark plug RCJ6Y which can be bought at any Home Depot, Lowes, Ace Hardware, etc for about $3

Oct 20, 2009 | Homelite Consumer Products Backpack...

1 Answer

Spark plug


If you will stop by the lawn mower place or auto parts place in your town ... they can tell you exactly what you need. They have a bool which lists all makes and models of equipment that cross references plugs and other consumer service level parts.

Oct 19, 2009 | Garden

1 Answer

Toro blower model 51591 electrical prong melted. help!


The answer is wrong. This model and other Toro blowers with the plug built into the body (as opposed to the new design with plug on cord) has this problem when the plug does not completely mate with the cord. This happened to mine too. Unfortunately Toro does not provide a replacement part. HOwever, perhaps the new designed cord will fit as a replacement, but I am unsure of this. When my plug melts completely I will try that.

Dec 22, 2008 | Toro Blowers Rake and Vac - Electric...

Not finding what you are looking for?
Black & Decker Black&Decker Ft1000 Electric Flex Tube Blower 140mph Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Black & Decker Garden Experts

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers

EugenesDIYDen
EugenesDIYDen

Level 3 Expert

479 Answers

Tim Whalen

Level 3 Expert

3069 Answers

Are you a Black & Decker Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...