Question about Compaq Armada 1700 Notebook

1 Answer

No software I have an armada 1700ith no soft ware in it at all so there for I can not do anything with it. How do I get it up and running. I do not have any discs for it. Can you help me please.

Posted by on

  • Len Falk
    Len Falk May 11, 2010

    You will probably need to download some drivers from the Compaq website. First let's ask - Have you "powered it up"? Did you get a "bios" screen? You will have to see how much room is in the Hard disk drive of the unit to figure out how much room you will need to choose and install an Operating System. I'll stop at this point to get your response to the questions.
    Hear from you soon.
    Len


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 150 Answers

You will need to install Windows XP or Vista by putting a Windows XP or Vista disk into the drive and then restarting the computer and running the cd. You can buy Windows Vista at any store that primarily carries computers, such as Best Buy.

Posted on Feb 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello, I have the Asko W6761 and all of a sudden it doesn't run the cycle anymore. It starts normally, i.e. pumps water into it, but then it doesn't start to wash..any idea what this could be? After a few...


Hello, my W6761 becomes the same. When it happens, you can clear the problem by "soft ware reset". Following is the procedure:
1. Power it on
2. Push Start/Stop buttom 5 times
3. Push "Enter", ">", "<", "Menu" buttons (from right to left)
4. Again, push "Enter", ">", "<", "Menu" buttons
5. Wait for 30 seconds that the above soft ware cycle resets the internal status
6. Toggle the power switch
7. You need to execute above "soft ware reset" within 15 seconds

Start washing and check to see if above reset the problem.
If it does not begin to work, repeat above "soft ware reset" cycle until it begins to work.
My W6761 once needed to repeat above cycle 7 times to solve the problem.
W6761 seems to be weak at high ambient temperature.

Tsunett

Oct 26, 2010 | Asko W6761 Front Load Washer

1 Answer

Can i download software for free of cost to my intel gvsr motherboard?


first try to identify the full name of your sound card. you can download a soundcard by typing the right sound card name. i just based this answer to the message that you sent us hope it helped send me a message for any concerns.

May 04, 2009 | Intel D845GVSR Motherboard

1 Answer

Can we install soft ware on PC to monitor the ext.# call history ? for panasonic D500


yes you can install a software on PC to monitor the ext # call history. The telephone system you are using must be configured with the software. Call you give me the details of the system and the software so we can setup.

May 04, 2009 | Lands Phones

2 Answers

Free soft ware downloads for vx 1000 webcam


Below there is the download page, selevt model and operative system to start the download.

Run the file after download has finished.

Software Download.

Feb 23, 2009 | Microsoft LifeCam VX-1000 Webcam

1 Answer

Can't get the set-up screen to come up with F10 or anything else!


There are many solutions for your problem. The one I know is to download the soft pack from the section "Software - System Management " that let you create a bootable floppy setup.
It is common for Armadas get the hidden partition with diagnostics and setup erased in formatting tasks.
Well then, download the "Computer Setup for portables" in that section. Before that you need to know the code of your laptop, that comes underneath it.
For example:
Compaq Armada 1700 Notebook PC 6233/S/3200/D/M/1
then
Microsoft Windows 98
then
Computer Setup for Portables
download sp and extract files, and use Make Disk.

If you use XP, try download version Win98 / Win2k.

Good luck.

Lucas from Argentina

Jan 18, 2009 | Compaq Armada 1700 Notebook

Not finding what you are looking for?
Compaq Armada 1700 Notebook Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

568 Answers

Are you a Compaq Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...