Question about Admiral AW22 Top Load Washer

1 Answer

The washer filledup over the limet and inondated

The washer filledup over the limit and inondated my basement it is an Admiral top loading washer model 4t40000 that I bought in the year 2000. Where is the limit switch located? Where can I buy a new one? I will never trust this one again.

Posted by on

  • claudelucien Feb 28, 2009

    The model # is 4t4000 I had put a 0 too much on my request

    Serial ck1411105

  • Anonymous Mar 05, 2009

    When I asked where to buy parts you said that I ad the wrong part number and I said that that I might have put one zero too much so the number is 4t4000 , I am not familiar with Fixya and don't even know if I am asking the question in the wright place.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 52 Answers

The pressure switch is located on control board. A tube connects from the switch to the bottom of the tub. To answer your question, it's right behind the wash size selector. There are many sites online to buy. If you give me your model # I can help you find one. I did try the model # you listed and said it didn't exist.

Posted on Feb 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It won't turn on


Admiral, Whirlpool, Maytag - Washer Repair - Not ... - YouTube

? 5:51
www.youtube.com/watch?v=oBihToN6dxs
Sep 6, 2013 - Uploaded by ApplianceVideo.com Troubleshoot your Admiral Top Load Washer that has these following ... The machine will not complete cycle (fills but won'twash or agitate) I recalibrate it and it ... my washer will not startbecause of lid latch it is an admiral.

Sep 29, 2015 | Admiral Washer Control Panel Frame 35-5733...

1 Answer

Admiral washer will agitate but will not spin dry


Hi,

Problems with a washing machine not spinning or not draining are often interrelated..

If you are having a problem with your top load washer then check out thistip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkoutthis tip...

Front Load Washing machine not draining and or not spinning


heatman101

Sep 19, 2010 | Admiral AW22 Top Load Washer

1 Answer

Admiral washing machine will not start


admiral washer machine will not start and before it died there was a weird noise coming from the machine.

Jun 28, 2010 | Admiral AW22 Top Load Washer

1 Answer

Belt needs replacing


Tip the washer back and the belt is underneath, just pull of and replace - simple.

Dec 29, 2009 | Admiral AW22 Top Load Washer

1 Answer

Washer does not spin


Simlest check is the door limit. Have seen this many times on the larger units. Pull plug out of wall and temporary bridge out lid latch mechanism.You can trace the wiring back to the panel and do the bridging out there. Please let me know if prob. still there.

Sep 23, 2009 | Admiral AW22 Top Load Washer

1 Answer

Admiral top load 10.1 Kg 4 speed Combo has become


water does not stay in drum goes straight out?

Jun 04, 2009 | Admiral AW22 Top Load Washer

1 Answer

Washer


Sounds like the top seals are worn, drum needs to be removed to replace top seals (2 off), job for skilled person.

Oct 24, 2008 | Admiral AW22 Top Load Washer

1 Answer

Admiral Top load washer won't agitate and squeals


Sounds like the gearbox, unfortunatly this is sealed and is cheaper to replace the machine, presume the machine is quite old.

Jun 28, 2008 | Admiral AW22 Top Load Washer

1 Answer

Admiral dryer-top loading-won't heat but spins


Thermal or high limit fuse. Usually located near the heating element. You can check continuity through these with a continuity or volt meter while the unit is unplugged. If one of these is bad, check your venting also for a restriction or blockage. Possibly you have a bad power lead to the outlet (tripped breaker, fried wire, etc) but this can only be checked with a volt meter or simmilar device.

Jun 11, 2008 | Admiral AW22 Top Load Washer

Not finding what you are looking for?
Admiral AW22 Top Load Washer Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Admiral Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Brad Brown

Level 3 Expert

13531 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you an Admiral Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...