Question about Trendware TEW-432BRP Wireless Router (TEW432BRP)

1 Answer

Can't browse my bank web site using Trendnet TEW-432BRP router.

I have difficulty loading my bank's web site (www.bbt.com) with my computer hardwired to the router. When I disconnect the router and connect the computer directly to the cable modem, I have no connection problems. When using XP SP3 and IE or FireFox, I have intermittent problems and frequent very long load times only when using the router.

When I use Linux live cd's (Puppy, Slax, Knoppix, Kanotix), the above web site will NOT load at all with the computer connected to the router (wire connection). When I bypass the router and connect directly to the modem, all browsers on all of the above Linux distributions work just fine.

I think it is obvious that the problem is the router. I just don't know what it is.

I changed the MTU value to various settings with no improvement. The default value is 1500.

Router is D1 model with latest firmware.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

When you are hardwired to the router you should disable the wireless internet access and enable the local area network.You should do the opposite when you are trying to connect to your router wireless.

Posted on Feb 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How properly to connect TRENDnet TEW-432BRP to laptop


To secure your wireless network from unauthorized access, please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Nov 26, 2010 | Trendware TRENDnet TEW-432BRP 54Mbps...

1 Answer

How do I change the channel on my TRENDnet TEW-432BRP router?


To change the channel, you need to loginto the router management page and click on the WLAN tab.

You can find the channel information under the WLAN tab. Change the channel ( channel 1 , 6 , 11 ) are the non overlapping channels and mostly prefered.

Oct 31, 2010 | Trendware TRENDnet TEW-432BRP 54Mbps...

1 Answer

Can't assess password to set up a new computer


Here is the PDF file that shows how to reset the router if the password is forgotten.

http://downloads.trendnet.com/TEW-432BRP/FAQ/FAQ_TEW-432BRP.pdf

Oct 14, 2010 | Trendware TRENDnet TEW-432BRP 54Mbps...

1 Answer

No SOftware Driver for TEW-432BRP


What brand is your router? Check for the IP address of the router and default password (should be written on the back of the device). Then type the IP address into the web browser on your main desctop in the kitchen like that for example http://192.168.0.1 enter the default username and pasword and you are in the router's menu.
Set up wireless connection SSID is the name of your network that will apear when you search it, do not change any of the default settings exept the SSID , enable, and select password. Use the WPA2 and type in your desired password and press SAVE . Then go to your bedroom and try to find the wireless network you've just created. And connect. Good Luck



Jul 23, 2010 | Trendware TRENDnet TEW-432BRP 54Mbps...

2 Answers

Reset password


What password are you referring to; Wireless Security or Web password to access the Router's interface?

If it's the 2nd; Open http://192.168.0.1 (default IP) on your web browser, type username: admin and Password: password. Click on Password then change the default password.

If it's the 1st; Open http://192.168.0.1 (default IP) on your web browser, type username: admin and Password: password (put you correct password if you change the default password).. Click Wireless on the left, Enable Encryption WEP or WPA; for WEP 64 bit you will have to use 10 HEX, meaning 0-9, A-F (e.g. common is phone number). If WPA; password can be set from 8-64 characters long.

Angel .

Jun 30, 2010 | Trendware TRENDnet TEW-435BRM 802.11g...

2 Answers

Why there is error 302 apear when i set up half way done


Make sure that your computer's CD-ROM is in working condition. Also verify that all cable connections are secure and that you are able to connect to the Internet, and then

Error 302 internal Error
1) Click cancel to exit the program
2) Eject the CD
3) Restart your Computer
4) Reinsert the Router setup CD

Jan 15, 2010 | Trendware TRENDnet TEW-432BRP 54Mbps...

1 Answer

Hi, I have a Trendnet TEW-432BRP wireless router and even if the speed link is 20 mbps (I tested it without the router in the midle) I get only 8 mbps having the router installed. Please help me solving...


You may need to do a firmware upgrade on your router to make the connection faster behind it....You can get the latest firmware from the manufacturers web site....

Dec 28, 2009 | Trendware TEW-432BRP Wireless Router...

1 Answer

Wireless router dissconnects


Upgrade the firmwire you will find-it on www.trendnet.com

Mar 14, 2008 | Trendware TRENDnet TEW-432BRP Cable/DSL...

3 Answers

My TEW-432BRP doesn't work when loggin yahoo mail or microsoft update web!


what are the setting on the router and or pc and modem? Do you have any firewall or portforwarding turned on? Are you using DHCP?
Need more info...

Jan 13, 2008 | Trendware TEW-432BRP Wireless Router...

Not finding what you are looking for?
Trendware TEW-432BRP Wireless Router (TEW432BRP) Logo

277 people viewed this question

Ask a Question

Usually answered in minutes!

Top Trendware Routers Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

alex metro
alex metro

Level 3 Expert

329 Answers

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Are you a Trendware Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...