Question about Chauvet Followspot 400g with Stand

1 Answer

I am trying to connect a Chauvet Followspot 400G to an Elation Sc

I am trying to connect a Chauvet Followspot 400G spotlight to an Elation Scene-Setter 48 and cannot seem to setup my channels/slide positions correctly. Basically, I need to program the 400G to slide number 19. How do I do this.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi,
Just follow the details below to set your spotlight.
The TFX-FS360 utilizes 2 DMX control channels.
Channel 1 is for the colour.
Channel 2 is the dimmer.
1) Press the FUNCTION button until the DMX Mode LED turns on.
2) Press the UP or DOWN buttons until the starting channel address you desire is located on the digital display. eg 19
Regards
Jon

Posted on Apr 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix chauvet CH460LS


*BUMP* I, too, have a dead channel on my Chauvet CH-460LS Controller-Dimmer.

f68c949c-ef9f-434a-a296-26a5137cdc85.png

Jun 05, 2014 | Chauvet Followspot 400g with Stand

1 Answer

FAN NOT WORKING


replace fan if the follow spot is working. if not check power supply.

Apr 09, 2014 | Chauvet Followspot 400g with Stand

1 Answer

The bulb and fuse keeps blowing out at the same time


Verify that you have the correct fuses and lamp. install the fuse(and only the fuse,no lamp) and fire it up.listen for the fan.if the fuse holds and the fan runs, you probably have an issue with the dimmer on the main board. Chauvet may be able to send you a new one, but this model was discontinued in 2012, which may parts hard to get. Good Luck!

Oct 14, 2013 | Chauvet Followspot 400g with Stand

1 Answer

How to make followlight with colours?


With DMX controller you command the color wheel within the unit to the desired color. I don't know if you can do this without a controller.

Apr 24, 2011 | Chauvet Followspot 400g with Stand

1 Answer

How to make follow spot with colours?


on the control panel, use the Function Select button to set it to manual mode. Now, the color buttons on the panel should control the colors.

Apr 24, 2011 | Chauvet Followspot 400g with Stand

1 Answer

Have a q-mix chauvet stage light goes thru all motions but light wont come on even changed bulbs and fuses alright


Chauvet uses a 16 amp Triac to control the power to many of the 120 volt lamps in their products. The Triac MAY be blown in your unit. If a bulb shorts, this blows the Triac.

I use Diigikey,com part number 497-2397-5 as the exact replacement. The generic number is BTA16-600BRG

Look for a part with this number on an aluminum plate and test the device. Also look for loose wires in the unit.

Sep 12, 2010 | Chauvet Followspot 400g with Stand

1 Answer

The followspot was on and the bulb blew with a loud bang, when I changed the bulb it powered up and came on but could no longer blackout or dim the light with the dimmer manually or DMX. I have it apart...


When he bulb blew out, it temporarily shorted and blew out the Triac that controls the voltage to the lamp. It will need to be replaced... A lot of the Chauvet units use a 16 amp, 600 volt Triac part number :

BTA16-600BRG

which is available from Digikey. It will be mounted on a heatsink.

Aug 23, 2010 | Chauvet Followspot 400g with Stand

1 Answer

It wont change colors


Make sure you are in manual mode with the Function Select button on the control panel.

Mar 11, 2010 | Chauvet Followspot 400g with Stand

Not finding what you are looking for?
Chauvet Followspot 400g with Stand Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chauvet Musical Instruments Experts

rhodesworks

Level 3 Expert

2567 Answers

mckimani

Level 1 Expert

45 Answers

Megasong
Megasong

Level 2 Expert

119 Answers

Are you a Chauvet Musical Instrument Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...