Question about GE Profile Harmony WPGT9360E 4.0 Cu. Ft. Washer

2 Answers

GE Harmony washer will not move from problem notification screen.

My GE Harmony washer gives me a notice that there has been a problem detected with the unit but does not allow me to go any further. I have unplugged it for a 12 hour period with no result. It is a touch screen but will not respond to requests. It remains on the error screen. Please help!

Posted by on

  • tranhtb Mar 09, 2009

    I have the same problem

  • Vicki Mar 13, 2009

    Error message Notice problem detected won't continue.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Press and hold the my cycles button and the back button simultaneously for 3 seconds. This will reset the control panel and allow you to see any stored errors.

Posted on Apr 20, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 52 Answers

It sounds like you need a new control board. If you have the model number, you can enter it into www.appliancepartspros.com

Posted on Feb 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ge harmony washer says there is a problem been detected how do I clear it


The Ge washer claims it has detected a problem. How do I clear it? There doesnt seem to be anything wrong with the unit.

Aug 26, 2010 | GE Profile Harmony WPGT9360E 4.0 Cu. Ft....

1 Answer

Won't continue cycle the message is ''Notice'' a problem has been detected with this unit.


Press and hold the my cycles button and the back button simultaneously for 3 seconds. This will reset the control panel and let you see any stored errors.

Mar 13, 2009 | GE Profile Harmony WPGT9360E 4.0 Cu. Ft....

1 Answer

I have a GE Profile Harmony washing machine,when I go to turn it on a notice pops up ther is a problem with this unit,what do I do?


What does the notice say? Also, it's important to enter the Field Service Mode:

1. Press the POWER key to turn the dryer on.
2. Press HELP. The main help screen is displayed.
3. Press and hold MY CYCLES and BACK simultaneously for 3 seconds. Press EXIT to return to the HOME screen.


This will tell you what exactly is going on with your washer. Good luck!

Mar 07, 2009 | GE Profile Harmony WPGT9360E 4.0 Cu. Ft....

1 Answer

Ge profile notice: a problem has been detected with this unit


hello: I have a its a GE PROFILE WPGT9350 washer and i have that pop up when i push power button what can i do if you can help this missg "Notice A problem has been detected with this unit if you can tell me how to get to Service Mode Diagnostics" thanks my email is mnunocortes@hotmail.com Actually I have tried unplugging it and letting it rest and plugging it back in, same message. Thanks anything can help

Feb 20, 2009 | GE Profile Harmony WPGT9360E 4.0 Cu. Ft....

1 Answer

Notice a problem has detected with this unit


If the home screen is not displayed press home then help. Then press my cycles and back together for 3 seconds.  Read what its says and then turn the power off then back on. It should be ready to go!

Nov 13, 2008 | GE Profile Harmony WPGT9360E 4.0 Cu. Ft....

3 Answers

A problem has been detected with this unit i need know how to enter my Service Mode Diagnostics


I'll email you a few pages out of a service manual for a WPGT9360 (closest I could find to your model number) hope this helps.

Nov 12, 2008 | GE Profile Harmony WPGT9360E 4.0 Cu. Ft....

2 Answers

GE Profile Harmony 4.0 -Broken Clutch Coupling


if your under warrenty always call for service repairing it yourself voids your warrenty

Jan 15, 2008 | GE Profile Harmony WPGT9360E 4.0 Cu. Ft....

3 Answers

"NOTICE A PROBLEM HAS BEEN DETECTED WITH THIS UNIT"


DW, Press the power key to turn the washer on. If the washer is on and the Home screen is displayed, press help. If the home screen is not displayed press home then help. Then press my cycles and back together for 3 seconds. The control will display any recorded errors. A more icon will appear in the display if more than one error was recorded. Press the more icon to list any additional errors. Use the back keypad to scroll through them. Make note of all errors and post back. We'll try to help you with the problem. Catriver

Jan 21, 2007 | GE Profile Harmony WPGT9360E 4.0 Cu. Ft....

Not finding what you are looking for?
GE Profile Harmony WPGT9360E 4.0 Cu. Ft. Washer Logo

722 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...