Question about Maytag 24 in. MDB6600A Jetclean II Built-in Dishwasher

1 Answer

Maytag MDB6600AWB fills, starts to wash, stops, does this 3 time

Does this 3 times, then lights go out....stops for good then....a timer? control board?

Posted by on

  • jepthal Mar 01, 2009

    My washer is a mdb7600aww. It starts and stops 3 times and then shuts down. It did this once before. I cleaned it out under the cutter etc. and it ran correctly. I did not see anything during the clean out that I thought would stop it from running.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 338 Answers

You have one of 3 problems.
1. a bad door switch
2. a bad connection under the dishwasher
3. a bad control

Posted on Feb 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag jetclean quiet plus fills but wont wash or drain.


The mother board is going out, or the drain pump is failing. Try un plugging it...... by which i mean turning the power off to the unit and doing a soft reset. See if it recycles into the normal mode and works.

Mar 06, 2015 | Maytag Dishwashers

2 Answers

Maytag DWU6602AAE. My Maytag dishwasher (14 years


SOUNDS LIKE A TIMER PROBLEM. YOU MAY WANT TO PRICE A REPLACEMENT TIMER. AND PRICE OUT NEW DISHWASHERS. GOOD LUCK!

Feb 25, 2010 | Dishwashers

1 Answer

I have a Maytag MDB4651AWW3 dishwasher that stops during cycle


is it making a humming sound ,then the pump is blocked see if any thing is stuck under spray arm, worst could be is the motor unplug before working on it. thanks

Dec 01, 2009 | Maytag 24 in. MDBH950AWS Built-in...

1 Answer

Water in Machine-Lights Blinking


Hi


Thanks for using FixYa. That means the control sensed that the heater in the D/W did not operate 3 times in a row. So the unit locks out. First remove the kick plate and you may have to pull the unit out from under the cab, but check your heater. Use a meter to see if it reads open; if so orders a heater assay it will come with a new control replace it too. If heater checks good then press in sequence normal wash, heat dry, normal wash, heat dry, normal wash, heat dry three times within 6 sec and all the lights will come on then hit cancel. What that did is reset the control and clear that fault. Keep in mind that D/W does not heat its own water and incoming water temp should be 120. The D/W will maintain that temp. When starting your D/W first turn on your hot water till it gets hot then start your D/W this ensures your unit fills with hot water and not cold


Please do rate the solution and revert for further assistance.


Thanks

Rylee

Nov 22, 2009 | Maytag 24 in. MDB9150A Built-in Dishwasher

1 Answer

Washer fills, runs 5 seconds and stops for 5


Major problems here. Sounds like a circuit board thing. If the machine is on the old side , ditch it and start new.

Oct 06, 2009 | Maytag Dishwashers

1 Answer

WATER ONLY FILLS 1ST TIME ON ANY CYCLE


Hi, After the first cycle, and after it drains/spins, does it start agitating when the next load of water is suppose to be filling?
Please let me know so I can assist you further. Sounds like the pressure hoe from the tub to the water level switch is plugged.

Thanks
Vic

May 17, 2009 | Maytag 24 in. MDB4100 Built-in Dishwasher

1 Answer

Clean Light Flashes


That means the control sensed that the heater in the d/w did not operate 3 times in a row. so the unit locks out. First remove the kick plate and you may have to pull the unit out from under the cab, but check your heater. use a meter to see if it reads open, if so order a heater assy it will come with a new control replace it to. If your heater checks good press in sequence normal wash , heat dry ,normal wash,heat dry , normal wash , heat dry three times within 6 sec all the lights will come on then hit cancel. What that did is reset the control and clear that fault. Keep in mind that d/w does not heat it's own water your incoming water temp should be 120. the d/w will maintain that temp. when starting your d/w first turn on your hot water till it gets hot then start your d/w this insures your unit fills with hot water and not cold

Jan 04, 2009 | Dishwashers

2 Answers

MDB7100AWB STOPS AFTER 3 SECONDS OF RUNNING


1. The Maytag sevice centers, if close, are "great". You describe the problem and they supply the part. If far still give them a call.

2. The problem is probably the control. It's a simple fix. Just replace the part. And you can order the part from the service center. Takes 10 minutes.

Tango

Feb 09, 2008 | Maytag MDB7100AWB Dishwasher

1 Answer

Quick Wash cycle restarting


Aestaie, On the quick wash cycle the machine goes through a heated rinse at 160 degrees. I think what's happening here is that the board checks the thermistor and is finding that the water is not hot enough and say's, hey, I need more time to heat this water and resets itself. The element in the dishwasher will only heat the water 1 degree every 3 to 5 minutes. So after the initial wash, there is a 2 minute drain, it fills again and there is the heated rinse. If the water is 120 and the final rinse needs to be 160, we have some heating to do here. Therefore the reset. Sounds like the dishwasher is working OK, Catriver..post back

Apr 24, 2007 | Maytag MDB9600A Jetclean II Built-in...

Not finding what you are looking for?
Maytag 24 in. MDB6600A Jetclean II Built-in Dishwasher Logo

Related Topics:

685 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Mike

Level 3 Expert

4332 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...