Question about Samsung DVD-711 DVD Player

2 Answers

DVD PLAYER WON'T PLAY DVDS

DVD PLAYER ONLY WORKS SOMETIME. GIVES A MESSAGE THAT DVD CANNOT BE PLAYED ON. LOADING MESSAGE STAYS ON A LONG TIME BEFORE SAYING DVD CANNOT BE PLAYED.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 85 Answers

Its the lens error in your unit.which reads the dvd that lens has to be cleaned as the dust is got collected on the lens.clean the lena with a tissue paper and it will work.

Posted on Feb 27, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

Symptoms shows that optical lens in DVD Player requires cleaning.
Use CD Cleaner or tape off top cover and clean lens with good quality cotton bud.

Posted on Feb 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My portable dvd player will not read any dvds


  • I would give it a good cleaning with a disk player cleaning. Those disks have little bristles on them that "sweep" the lens and clean it real well. Remember that if the lens is so dirty that it won't play any DVD you may need to run that cleaner disk a few times to get the lens back to normal working condition.
  • A lens cleaner disk should be ran one time a week to avoid problems with playing disks be it CD or DVD or Computer.
  • Sometimes players go bad so keep in mind this could be the problem as well but I have had the DVD player in my garage get so dirty I had to clean it a few times to get it to work normal.
  • Hope this helps and thank you for using FixYa.
Regards, Tony

Jul 11, 2011 | Sylvania SDVD8732 Player

1 Answer

My unit is a DVP3140, purchased 2006 or 2007. As soon as I got it, I changed the code to region 0 so that I could play the DVDs I bought when I lived in Italy. It worked great for about 3.5 years of...


By changing to Region 0 you've changed the Laser control and subsequently the Laser is failing earlier than it would have done under normal operation.

The only solution would be to replace the Laser which is not normally cost effective and often unavailable anyway.

CDs may still play for a period of time as these require less power as there isn't as much information to read as a DVD.

May 29, 2011 | Philips DVP3140

1 Answer

My lg bd50 is able to play any normal dvds however it is unable to play any bluyray dvds!!! when a blueray is loaded into the machine you cannot even eject the disc for sometime. i downloaded updates to...


hi,
blue ray players takes one to two minute to read the content. it will not read as fater as dvd. give some time and then find out what the player says. error or no disc. also check ur BD's region and the region of the disc u inserted. BD's comes with only one region.
ok

Dec 17, 2010 | LG BD350 Blu-Ray Player

1 Answer

Screen says loading.Then says (no disc)


There are a lot of reasons why that could happen. Sometimes when a DVD player needs to be cleaned it won't read a disk.Sometimes when you try to play a NTSC disk on a PAL DVD player or visa versa it won't play. Region coding could be another issue. And sometime home burned DVDs won't play in certain players.

Mar 03, 2010 | TruTech DV288B3 DVD Player

1 Answer

Dvd player will not play dvds


Motor was not working. Disposed of old player and bought another dvd player

Nov 04, 2009 | DVD & Blu-Ray Players

1 Answer

Sony DVD player DVP-NS700H unable to play DVDs.


the dvd player lens damaged. -please change it with good technician

Sep 21, 2009 | Sony DVP-NS700H DVD Player

2 Answers

Dvd won't play or eject


If you want to get the dvd out
you can try this:
First turn of you dvd player at the mains, Then power it up, But the moment it powers up press the eject button a few times so it doesn't start to load. If it doesn't work the first time try it one more time since you may not get the hang of it at first.
then you dvd should eject.
With dvd players like this, corrupt, copied or really scratched dvds may make your dvd player do this.
Regards

Jul 25, 2009 | NexxTech DP3222 DVD Player

1 Answer

Disc error message when load DVD


Are you loading to play or to record?
Commercial DVDs should play.
DVDs for recording may not be recognized by your drive. First make sure that the disc is blank. You must insert a blank disc of the proper format: DVD-R or RW, DVD+R or RW. Even with the proper format, some brands may not behave the same way as other brands.

Dec 24, 2008 | JVC XV-N320 DVD Player

1 Answer

Won't play some DVDs


ya try cd lens cleaner ok they sell at store its a cd with litte brushes on it cleans lazor ok thx nick

Feb 11, 2008 | Mintek MDP-1010 Portable DVD Player

Not finding what you are looking for?
Samsung DVD-711 DVD Player Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung DVD & Blu-Ray Players Experts

The Knight
The Knight

Level 3 Expert

68301 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4757 Answers

Are you a Samsung DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...