Question about Avaya PARTNER RELEASE 7 RAC-REM ACCESS CARD (700317035) Server

1 Answer

Replacing Partner 308 w/ 509&400EC

I have an Avaya Partner 308 R3 system with the original 4 user x 10 minute PCMCIA Voice Mail Card that just died. I picked up a 509 R7 with 400EC, 4 Port Card for voice mail and a 2 slot carrier. I don't need 9 outside lines. Do I need to install the 400 for any reason if I am using the Partner VS mail system? Due to space constraints, I would rather not get a 5 slot carrier, but would like to pick up a 012 or 308EC for the extra extensions. Thanks for your assistance. Mitch

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You don't need the 400 module for the voicemail. Therefore, you also don't need the 2 slot carrier either.

Posted on Mar 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where i can get software for mck pbxgateways


You're in the server section asking about an Avaya PBX. Have you tried contacting Avaya?

Aug 01, 2014 | Avaya Mck Pbx Gateway Unit 8 Port Switch...

1 Answer

IBM Server not detecting hard drives


You know i find this all very suspicious. For one thing a ups is designed to take the hit so it will get fried and your computer will be fine. Suspicious to me but not an answer to your question so i will try this. The new raid card was installed (might be off on this part, haven't kept up with this) were the hard drives and the raid assembly matched back up. IE raid 1, 2, 3 etc. Do believe they are up to raid 7 now. So if hard drives were not put back in the original position and and raid card setup for the original raid array you might have this problem. Hope this helps, but it's been a long time since i worked with raid arrays.

Feb 11, 2014 | IBM System x3250 M3 4252 - Server -...

2 Answers

Nec dterm80 how to keep the voicemail from


Check the controls window and recheck your settings. Set as you like.

Oct 03, 2013 | Mrv new 8000 40 port term server dc power...

4 Answers

How to reset administrator password on windows server 2012 raid server? My computer is HP HP ProLiant ML110 G5 with raid 10. I have try to use Chntpw to reset the lost password, but it cannot detect my...


Which operating system ??
The Hewlett Packard ILO (Integrated Lights Out) tool lets a network administrator connect to a remote Windows Server system.
This process enables the administrator to perform troubleshooting and problem fixing as if the server were connected locally.
If the password of the account used for connectivity becomes corrupt, it can be reset from within the Windows interface.

Log on to a Windows computer that has a connection to the HP ILO.
Click the "Start" button. In the "Search" box, type "lusrmgr.msc."
Press "Enter" to open the User Management console.
Double-click "Local Users and Groups."
Click "Users."
Scroll down to the HP ILO user account.
Right-click on it. From the drop-down list, click "Set Password."
Type in a new password.
Click "OK."


http://windows.microsoft.com/en-US/windows-vista/What-to-do-if-you-forget-your-Windows-password
http://h18000.www1.hp.com/products/servers/management/remotemgmt.html
Retrieving administrator in xp
Recover the lost administrators password in Windows XP
Slightly more work needed if you lose or forget the Windows XP
administrator password.
1.First reboot Windows XP in safe mode by re starting the computer and
pressing F8 repeated as the computer starts up.
2.Then (in safe mode) click Start and then click Run.
In the open box type "control userpasswords2" without the quotes
I have just used quotes to differentiate what you have to type.
3.You will now have access to all the user accounts, including the
administrators account and will be able to reset the lost password.
4.Just click the administrators user account, and then click Reset
Password.
5.You will need to add a new password in the New password and the
Confirm new password boxes, and confirm by clicking OK.
All done, you have recovered the lost administrators password!

Sep 23, 2013 | HP ProLiant ML110 G5 (444809-001) Server

1 Answer

Model no a1303


How exactly do you have an update problem with a PSU?
You just replace them.

May 08, 2013 | Avaya Norvell/excelsys Xgen 1200w 10a...

1 Answer

I have my setting to let me get e-mail messages and comments for facebook, but it's stopped working. Facebook is only showing me messages and comments if I go to my facebook account. ...


Go on www.facebook.com 1. Click on account (right top) 2. Click on account settings 3. Click on notification (the top bar) 4. Click on the notifications you want to receive
If you still don't get them, check your spam folder.
Another problem could be, that you ignore the user you want to get notified from: On the facebook frontpage after login 1. click the little triangle next to the "Most recent" 2. click "edit options" 3. Say which notifications you wan to see, which user to ignore etc. This also affects the mail notification.

Mar 11, 2011 | Computer Servers

1 Answer

PowerEdge 4200 RAID 5 - 2 out of 4 failed. Getting "Operating System Not found". Option replace 1 drive of the two that failed. Option 2 replace both drives. Option 3 send all 4 drives for...


Hi,
If two drives have failed out of a RAID 5 array, unfortunately i'm pretty sure that means that the array has degraded beyond its redundancy level.
Advanced data recovery may be able to help with getting your data back, but I wouldn't pin your hopes on it. Once two discs fail, the array becomes degraded, and the data is irrecoverable.
Did you manage to make a backup before the drive(s) died?

Feb 02, 2011 | Dell PowerEdge 4200...

1 Answer

Windows could not start because the following file is missing or corrupt ntoskrnl.exe Operating System is Microsoft Server 2003 R3


ntoskrnl.exe is a main file that is part of windows. if you have the windows server 2003 R2 cd you can boot up with that and there will be an option to "repair" once you get so far. I would try this first as it is your best bet and can replace missing files.

Nov 23, 2010 | Dell PowerEdge 1800 Server

1 Answer

Server power issues with PCI cards


Have you tried inserting it in a different PCI slot? I understand that this one in not faulty, but obviously the HP isn't getting its POWER OK signal ...

Mar 18, 2009 | HP ProLiant ML110 Server

Not finding what you are looking for?
Computer Servers Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Avaya Computer Servers Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you an Avaya Computer Server Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...