Question about Car Audio Receivers

1 Answer

Navigaiton bypass/hack for Jensen vm9512hd w nav101

Ive read the hack to watch movie while drivig but how about controlling the navigation while driving. Is there a hack for it to,or will the hack for the DVD work for it also?
1) Insert the DVD and you'll get the blue screen. 

(If you have more than one tv, the unit itself will have the blue screen but the additional tv's you have plugged in will NOT, they will show the dvd menu. Thus you will be able to see the hidden menu on the additional screens after inputting the code, but not on the main unit because of its blue screen.) 

2) On the main remote, push stop twice and then 1, 2, 6, 4 

3) Push the joystick on the unit SOUTH twice and then click it once. 

4) Press SYS SETUP on the main remote twice to save your settings

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 61 Answers

Buy a 3pin toggle switch
add a wire to the red wire (12v) in back of unit
do the same with the ground (black)
now install theses wires to the toggle switch (toggle switch has pictures of ground and positive pins)
install the brake wire to the pin that is empty on the toggle switch
power everything including the new installed switch and DVD should show
if not just switch the brake wire with the ground wire on the toggle switch
but the navigation should work with the unit while your driving...........this is the real trick to solve your problem
good luck

Posted on Mar 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jensen car stereo VM9022 has a password Need to bypass it


call Jensen at 1800-323-4815 they will give you the code

Mar 14, 2010 | Jensen Car Audio Receivers

1 Answer

I bought this car that has the vm9512hd and it will not come untill i enter the un lock code i do not have it is there any way to bypass it


NO way to bypass, its a safety feature that is activated when the radio is removed to prevent anyone who takes the radio from using it. You can go to a stereo shop and they might be able to help but will be a charge to do so...

Nov 05, 2009 | iLO XM-MP3-CD Car Stereo

2 Answers

I have a jenson indash dvd player is there a way


most of the times this is solved by putting together the pink wire with the black ground wire and then to your chassis. some newer models require this to be done three times (stepping on the brakes three times before you get a signal). you can use a switch between this connection and turning it on and off three times to get the signal. you will have to repeat this everytime you turn off the unit.

Sep 13, 2009 | Jensen Car Audio Receivers

1 Answer

My uv8 wont eject my disk


I suggest you disassemble the radio and take it out that way. While your in you can check on the blockage. Shouldn' t be hard. Good luck.

Jun 07, 2009 | Jensen Car Audio Receivers

1 Answer

I keep getting a bad disc reading when trying to play dvds on my jensen vm9512hd radio. Cd play geat but movie do not play new or old. i have cleaned disk.


I have the same problem. My unit has been sent in for repairs twice. Each time the DVD deck has been replaced. After this last repair it stopped playing dvds in 1 week. I know its not a solution but at least your not alone. I am asking for a replacement this time around.

Mar 21, 2009 | Car Audio Receivers

2 Answers

Jensen UV7I Problem when i push my clutch in its mutes the sound.


i would check to see if a wire is touching the clutch pedal ,when its depressed.either its grounding out on the clutch arm or its a loose connection that is being moved by the clutch arm.

Mar 10, 2009 | Jensen Car Audio Receivers

3 Answers

Linear uv7


here's the code. I did this with my remote and it works.
press stop twice(which is also the band button)
press1,2,6,4
press down 1 time(button below the play/enter)
press play/enter 1 time
(you should see the menu now)
brake override should say no
I was told to change macrovision to no
hit system setup twice to save and exit
hope it works like mine did

Dec 07, 2007 | Phase Linear 160W AM/FM/CD Receiver W/...

2 Answers

Bypass brake for a jensen vm9311


the wire is pink and say parking on the wire.

Nov 24, 2007 | Panasonic CQ-C3300U CD Player

Not finding what you are looking for?
Car Audio Receivers Logo

Related Topics:

863 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...