I have a Pentax ZX-60 camera. When I insert a new roll of film, I pull out enough film so that it should begin to load when I close the door. So I close the film door and I hear a noise but the film never advances to the ready position
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I think the 'o____' is intended as a pictorial representation of a roll of 35mm film, the 'E' signifying an error in loading it. Not used this particular Pentax model myself, but some of them have a slot in the take-up spool where the 'tongue' of the film should be inserted - is that the case with yours ?
Open the back with the side latch, pull the header of your film out of the roll, insert that into the slot on the roller spindle far enough for it to wrap once, close the back of the camera, and then power it up. It will start to wind to the first photo segment by itself. If it doesn;t the film was not inserted far enough into the spindle.
Repair would be at least $139 from Blue Moon Camera. I would buy another MZ-50 (ZX-50 is the same) off eBay or you could buy a ZX-30 from Blue Moon Camera for $75 with 1 year warranty. They are professional.
Pull up on the rewind knob ( left side ) to open the film door. put film cassette in chamber then lower rewind knob and pull enough film leader to the take up spool. attach film to spool. close the film door then advance the film to #1 on the counter.
I really think this is the classic zx - 50 shutter motor problem : small motor on the side of the mirror box is not cocking the shutter . This is very repairable but unfortunately it requires fair amount stripping down of the camera to get to the fault and so you will have to take it in for repairs.